Loading…
Loading…
| 名称 | ID | 标签 | 描述 | 类型 | 源代码 |
|---|---|---|---|---|---|
| self_test | 402E | 自测试 | Self-test - Transmitter self-test in progress. The analog output is frozen. Recognised failures are displayed. | msrc_UNKNOWN | 详细信息 |
| master_test | 402F | Transmitter reset | Transmitter reset - The transmitter is restarted. Non-permanent stored data are lost. Self-test is subsequently conducted. | msrc_UNKNOWN | 详细信息 |
| wire_trim | 4030 | Lead balancing | Lead balancing - The resistance of the connection lines to sensor can be compensated for. This step is only necessary for measurement resistors in 2-wire circuitry. | msrc_UNKNOWN | 详细信息 |
| reset_parameter | 4031 | Data reset | Data reset - All data, which were not made permanent are reset to their original values. This allows the old data to be restored when a parameter setting is interrupted. | msrc_UNKNOWN | 详细信息 |
| configure_sensor | 4036 | Sensor config. | Input parameter - the parameters for wiring to the input (sensor type, etc.) can be fixed via the function. | msrc_UNKNOWN | 详细信息 |
| select_unit | 4037 | Process unit | 现场设备变量单位——使用数值表示、最小范围、范围上限、范围下限、传感器上限和传感器下限显示的工程单位。 | msrc_UNKNOWN | 详细信息 |
| test_range | 4038 | 中止返回正常 | msrc_UNKNOWN | 详细信息 | |
| configure_output | 403B | Output config. | Configuration of analog output - The setting determines the behaviour of the output in case of failure. | msrc_UNKNOWN | 详细信息 |
| send_data | 403C | Send data | msrc_UNKNOWN | 详细信息 | |
| edit_curve | 4082 | Tiepoints | Tiepoints - review and edit the linearisation characteristics of the Free style sensortype. | msrc_UNKNOWN | 详细信息 |
| input_trim | 408B | A/D trim | Analog to Digital trim - Allows the calibration of a selected Analog Input with an external reference ( precision calibrator ). | msrc_UNKNOWN | 详细信息 |
| preset_all | 408C | Factory preset | Factory preset - All calibration data are overwritten with the basic data fixed during manufacture. The parameter data are reset to the standard values. CAUTION: The user data are thus lost permanently. | msrc_UNKNOWN | 详细信息 |
| preset_all_abort | 408D | preset_all_abort | msrc_UNKNOWN | 详细信息 | |
| preset_mfgtrim | 408E | Reset trimmings | Reset trimmings - All calibration data are overwritten with the basic data fixed during manufacture. The parameter data is unchanged. | msrc_UNKNOWN | 详细信息 |
| loop_test | 1002 | 回路测试 | 回路测试——允许用户将选择的模拟量输出手动调节至选择的常数输出值。 | msrc_UNKNOWN | 详细信息 |
| dac_trim | 1004 | D/A修正 | 数字到模拟修正——允许对选择的模拟量输出进行标定，在模拟量输出的操作端点有外部参考。 | msrc_UNKNOWN | 详细信息 |
| scaled_dac_trim | 1005 | 成比例的D/A修正 | 数字到模拟缩放修正——允许对选择的模拟量输出进行标定，在模拟量输出的操作端点有外部参考。 | msrc_UNKNOWN | 详细信息 |
| leave_fixed_current_mode | 1003 | 退出固定电流模式 | 退出固定电流模式——使选择的模拟量输出退出输出为常数值的模式，使输出返回输出跟踪输入的模式。 | msrc_UNKNOWN | 详细信息 |
| applied_rerange | 1007 | 应用数值 | 应用值——通过将需要的上限值和下限值应用至设备输入对设备执行重新排列。 | msrc_UNKNOWN | 详细信息 |
| return_to_normal | 1016 | 中止返回正常 | msrc_UNKNOWN | 详细信息 | |
| burn_eeprom | 100C | 烧录EEPROM | 烧录电可擦除只读存储器——现场设备将随机存取存储器中数据复制到电可擦除只读存储器的操作，主机可做修改。 | msrc_UNKNOWN | 详细信息 |
| 名称 | ID | 标签 | 描述 | 类型 | 源代码 |