Loading…
Loading…
| Name | ID | Label | Description | Type | Source |
|---|---|---|---|---|---|
| self_test | 402E | ｾﾙﾌ ﾃｽﾄ | Self-test - Transmitter self-test in progress. The analog output is frozen. Recognised failures are displayed. | msrc_UNKNOWN | Details |
| master_test | 402F | Transmitter reset | Transmitter reset - The transmitter is restarted. Non-permanent stored data are lost. Self-test is subsequently conducted. | msrc_UNKNOWN | Details |
| wire_trim | 4030 | Lead balancing | Lead balancing - The resistance of the connection lines to sensor can be compensated for. This step is only necessary for measurement resistors in 2-wire circuitry. | msrc_UNKNOWN | Details |
| reset_parameter | 4031 | Data reset | Data reset - All data, which were not made permanent are reset to their original values. This allows the old data to be restored when a parameter setting is interrupted. | msrc_UNKNOWN | Details |
| configure_sensor | 4036 | Sensor config. | Input parameter - the parameters for wiring to the input (sensor type, etc.) can be fixed via the function. | msrc_UNKNOWN | Details |
| select_unit | 4037 | Process unit | ﾌｨｰﾙﾄﾞ機器ﾊﾞﾘｱﾌﾞﾙ単位 - 単位はﾃﾞｼﾞﾀﾙ値, 最小ｽﾊﾟﾝ, Upper ﾚﾝｼﾞ値, Lower ﾚﾝｼﾞ値, Lower ｾﾝｻｰ ﾘﾐｯﾄ, Upper ｾﾝｻｰ ﾘﾐｯﾄの表示に使用されます。 | msrc_UNKNOWN | Details |
| test_range | 4038 | ﾉｰﾏﾙ ﾓｰﾄﾞに戻します | msrc_UNKNOWN | Details | |
| configure_output | 403B | Output config. | Configuration of analog output - The setting determines the behaviour of the output in case of failure. | msrc_UNKNOWN | Details |
| send_data | 403C | Send data | msrc_UNKNOWN | Details | |
| edit_curve | 4082 | Tiepoints | Tiepoints - review and edit the linearisation characteristics of the Free style sensortype. | msrc_UNKNOWN | Details |
| input_trim | 408B | A/D trim | Analog to Digital trim - Allows the calibration of a selected Analog Input with an external reference ( precision calibrator ). | msrc_UNKNOWN | Details |
| preset_all | 408C | Factory preset | Factory preset - All calibration data are overwritten with the basic data fixed during manufacture. The parameter data are reset to the standard values. CAUTION: The user data are thus lost permanently. | msrc_UNKNOWN | Details |
| preset_all_abort | 408D | preset_all_abort | msrc_UNKNOWN | Details | |
| preset_mfgtrim | 408E | Reset trimmings | Reset trimmings - All calibration data are overwritten with the basic data fixed during manufacture. The parameter data is unchanged. | msrc_UNKNOWN | Details |
| loop_test | 1002 | ﾙｰﾌﾟ ﾃｽﾄ | ﾙｰﾌﾟ ﾃｽﾄ - ｱﾅﾛｸﾞ出力をﾕｰｻﾞｰが選択した値で固定出力します | msrc_UNKNOWN | Details |
| dac_trim | 1004 | D/A ﾄﾘﾑ | D/A ﾄﾘﾑ (ﾃﾞｼﾞﾀﾙ/ｱﾅﾛｸﾞ ﾄﾘﾑ) - ｵﾍﾟﾚｰﾃｨﾝｸﾞ ｴﾝﾄﾞ ﾎﾟｲﾝﾄに対するｱﾅﾛｸﾞ出力と外部指示計とのｷｬﾘﾌﾞﾚｰｼｮﾝを行います。 | msrc_UNKNOWN | Details |
| scaled_dac_trim | 1005 | ｽｹｰﾘﾝｸﾞ D/A ﾄﾘﾑ | ｽｹｰﾘﾝｸﾞ D/A ﾄﾘﾑ - ｵﾍﾟﾚｰﾃｨﾝｸﾞ ｴﾝﾄﾞ ﾎﾟｲﾝﾄに対する選択したｱﾅﾛｸﾞ出力と外部指示系とのｷｬﾘﾌﾞﾚｰｼｮﾝを行います。 | msrc_UNKNOWN | Details |
| leave_fixed_current_mode | 1003 | 固定電流ﾓｰﾄﾞを終ります | 現在の固定ﾓｰﾄﾞを終了 - ｱﾅﾛｸﾞ出力を定数値のﾓｰﾄﾞから移行させ, 出力が入力に応じて変わるﾓｰﾄﾞに戻します。 | msrc_UNKNOWN | Details |
| applied_rerange | 1007 | 実入力 | 実入力 - 機器のﾚﾝｼﾞ変換を Upper ﾚﾝｼﾞ値と Lower ﾚﾝｼﾞ値の実際の入力で行います。 | msrc_UNKNOWN | Details |
| return_to_normal | 1016 | ﾉｰﾏﾙ ﾓｰﾄﾞに戻します | msrc_UNKNOWN | Details | |
| burn_eeprom | 100C | EEPROM の焼付け | 電気的に消去可能 Read Only Memory の焼付け - ﾌｨｰﾙﾄﾞ機器が Random Access Memory に存在するﾃﾞｰﾀを電気的に消去可能 Read Only Memory にｺﾋﾟｰする場合の操作で, ﾎｽﾄによる変更を永続的なものにします。 | msrc_UNKNOWN | Details |
| Name | ID | Label | Description | Type | Source |