Loading…
Loading…
| Name | ID | Label | Description | Type | Source |
|---|---|---|---|---|---|
| temp_offset_cal | 4300 | Perform Cal | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| temp_slope_cal | 4301 | Perform Cal | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| read_di_1_state | 4277 | Read Discrete In | Reads the state of the Discrete Input. | msrc_UNKNOWN | Details |
| read_di_2_state | 4278 | Read DI 2 | Reads the state of the Discrete Input. | msrc_UNKNOWN | Details |
| read_do_1_state | 4274 | Read DO 1 | Reads the state of the Discrete Output. | msrc_UNKNOWN | Details |
| read_do_2_state | 4275 | Read DO 2 | Reads the state of the Discrete Output. | msrc_UNKNOWN | Details |
| read_do_3_state | 4276 | Read DO 3 | Reads the state of the Discrete Output. | msrc_UNKNOWN | Details |
| refresh_alarm_history | 455C | Refresh Alarm Event Log | Uploads the 50 alarm history records from the device. This method takes approximately 30 sec to run. | msrc_UNKNOWN | Details |
| self_test | 426A | Самотестирование | Instructs transmitter to perform internal self test. | msrc_UNKNOWN | Details |
| read_modbus_register | 4563 | Считать данные Modbus | msrc_UNKNOWN | Details | |
| write_modbus_register | 4564 | Записать данные Modbus | msrc_UNKNOWN | Details | |
| perform_varDiagnostic_Action_Code | 4522 | Perform Diagnostic Action | msrc_UNKNOWN | Details | |
| select_acknowledge_alarm | 455B | Acknowledge the selected alarm | msrc_UNKNOWN | Details | |
| scaled_dac_trim_ao2 | 4273 | Scaled AO2 trim | Цифровая-аналоговая регулировка по масштабу - обеспечивает калибровку аналогового выхода, по внешнему образцовому прибору крайних рабочих точек аналогового выхода | msrc_UNKNOWN | Details |
| pc1_stat | 42CB | Статус | When set, indicates that the Discrete Event has reached its programmed trigger point. | msrc_UNKNOWN | Details |
| pc2_stat | 42CC | Статус | When set, indicates that the Discrete Event has reached its programmed trigger point. | msrc_UNKNOWN | Details |
| pc3_stat | 42CD | Статус | When set, indicates that the Discrete Event has reached its programmed trigger point. | msrc_UNKNOWN | Details |
| pc4_stat | 42CE | Статус | When set, indicates that the Discrete Event has reached its programmed trigger point. | msrc_UNKNOWN | Details |
| pc5_stat | 42CF | Статус | When set, indicates that the Discrete Event has reached its programmed trigger point. | msrc_UNKNOWN | Details |
| do1_stat | 4308 | Status DO1 | Если задано, указывает на то, что был инициирован дискретный выход 1. | msrc_UNKNOWN | Details |
| view_xmtr_status | 4242 | View status | Reports any currently active device status information. | msrc_UNKNOWN | Details |
| sensor_setup_meth | 427C | Sensor Selection | This selection must be made to enable calibration parameters to be visible for the selected sensor type. | msrc_UNKNOWN | Details |
| meth_characterize_sensor | 4884 | Датчик | msrc_UNKNOWN | Details | |
| api_setup | 42C0 | Настройка нефтяных измерений | This method will step the user through setting up the API parameters. | msrc_UNKNOWN | Details |
| mmi_auto_zero | 42B8 | Выполнить автоматическое обнуление | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| dencal_a | 42D0 | Первая точка | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| dencal_b | 42D1 | Вторая точка | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| dencal_c | 42D2 | Третья точка | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| dencal_d | 42D3 | Четвёртая точка | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| dencal_fd | 42D4 | Плотность потока | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| write_discrete_assignment_meth | 4293 | Assign Discrete Action | Assigns a discrete to an action. Select none for no discrete assignment. | msrc_UNKNOWN | Details |
| read_discrete_assignment_meth | 4294 | Read Discrete Action Assignment | For a selected discrete action, reports the associated discrete assignment. | msrc_UNKNOWN | Details |
| review_discrete_assignment_meth | 4295 | Review All Discrete Actions | Cycles through the discrete actions and reports the associated discrete assignments. | msrc_UNKNOWN | Details |
| fix_do_1 | 426E | Discrete Output 1 Test | Outputs a user-programmed discrete state to the discrete output. | msrc_UNKNOWN | Details |
| fix_do_2 | 426F | Discrete Output 2 Test | Outputs a user-programmed discrete state to the discrete output. | msrc_UNKNOWN | Details |
| fix_do_3 | 4270 | Проверка дискретного выхода 3 | Outputs a user-programmed discrete state to the discrete output. | msrc_UNKNOWN | Details |
| fix_frequency | 426D | Frequency Output Test | Outputs a user-programmed frequency to the frequency output. | msrc_UNKNOWN | Details |
| fix_ao_1 | 426B | mA Output 1 Loop Test | Изменить токовый выход — позволяет пользователю вручную управлять выбранным токовым выходом для установки выбранного постоянного выходного значения. | msrc_UNKNOWN | Details |
| analog_1_trim | 4271 | Trim mA Output 1 | Настройка цифро-аналогового преобразователя — позволяет выполнять калибровку выбранного токового выхода с использованием внешних контрольных параметров на рабочих конечных точках токового выхода. | msrc_UNKNOWN | Details |
| fix_ao_2 | 426C | mA Output 2 Loop Test | Изменить токовый выход — позволяет пользователю вручную управлять выбранным токовым выходом для установки выбранного постоянного выходного значения. | msrc_UNKNOWN | Details |
| analog_2_trim | 4272 | Trim mA Output 2 | Настройка цифро-аналогового преобразователя — позволяет выполнять калибровку выбранного токового выхода с использованием внешних контрольных параметров на рабочих конечных точках токового выхода. | msrc_UNKNOWN | Details |
| start_total | 4264 | Start | Enables the internal totalizers to begin counting. | msrc_UNKNOWN | Details |
| stop_total | 4265 | Stop | Prevents the internal totalizers from counting. | msrc_UNKNOWN | Details |
| reset_all_total | 4266 | Сбросить все | Resets internal totalizers. | msrc_UNKNOWN | Details |
| reset_mass_total | 4267 | Reset Total | Resets internal totalizers. | msrc_UNKNOWN | Details |
| reset_vol_total | 4268 | Reset Total | Resets internal totalizers. | msrc_UNKNOWN | Details |
| batch_ctl_meth | 4269 | Batcher cntrl | Allows the user to start, stop, end, inhibit, reset or resume a batch. Also allows user to print batch ticket or inhibit batch totalizers. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth | 429B | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_new | 4DA8 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| read_alarm_severity_meth | 429C | Read Severity | Reports the severity level of the selected alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| review_alarm_severity_meth | 429D | Review Severity | Reports the severity level of all the alarms. | msrc_UNKNOWN | Details |
| abort_auto_zero | 42FF | Aborts Auto Zero operation and continues to use previous zero offset value. | msrc_UNKNOWN | Details | |
| leave_fixed_do1_mode | 4302 | Exits fixed mode and returns the discrete output to its active state. | msrc_UNKNOWN | Details | |
| leave_fixed_do2_mode | 4303 | Exits fixed mode and returns the discrete output to its active state. | msrc_UNKNOWN | Details | |
| leave_fixed_do3_mode | 4304 | Exits fixed mode and returns the discrete output to its active state. | msrc_UNKNOWN | Details | |
| leave_fixed_freq_mode | 4305 | Exits fixed mode and returns the frequency output to its active state. | msrc_UNKNOWN | Details | |
| mmi_leave_analog_fixed_current_mode1 | 4306 | Вывод из режима фиксированного тока | Вывод из режима фиксированного тока — выводит выбранный токовый выход из режима эксплуатации при наличии на выходе постоянного значения и возвращает выход в режим эксплуатации при отслеживании выходом входного значения. | msrc_UNKNOWN | Details |
| mmi_leave_analog_fixed_current_mode2 | 4307 | Вывод из режима фиксированного тока | Вывод из режима фиксированного тока — выводит выбранный токовый выход из режима эксплуатации при наличии на выходе постоянного значения и возвращает выход в режим эксплуатации при отслеживании выходом входного значения. | msrc_UNKNOWN | Details |
| abort_send | 42FE | msrc_UNKNOWN | Details | ||
| must_send_pv | 4001 | msrc_UNKNOWN | Details | ||
| must_send_sv | 4003 | msrc_UNKNOWN | Details | ||
| must_send_tv | 4005 | msrc_UNKNOWN | Details | ||
| must_send_event_var | 4309 | msrc_UNKNOWN | Details | ||
| must_send_units | 4010 | msrc_UNKNOWN | Details | ||
| must_send_scaling | 4129 | msrc_UNKNOWN | Details | ||
| must_send_fi_scaling | 4130 | msrc_UNKNOWN | Details | ||
| must_send_fault_level | 414A | msrc_UNKNOWN | Details | ||
| write_simulation_params_massflow | 4560 | Simulate Mass Flow Rate | msrc_UNKNOWN | Details | |
| write_simulation_params_temp | 4561 | Simulate Temperature | msrc_UNKNOWN | Details | |
| write_simulation_params_Density | 4562 | Simulate Density | msrc_UNKNOWN | Details | |
| meth_meter_verification | 4525 | Meter Verification | Starts meter verification and shows the result PASS or FAIL. This procedure takes upto 4 minutes. | msrc_UNKNOWN | Details |
| abort_meter_verification | 4565 | msrc_UNKNOWN | Details | ||
| meth_set_up_real_time_clock | 488D | Часы реального времени | msrc_UNKNOWN | Details | |
| meth_setup_mA_output_1 | 488F | Токовые выходы | msrc_UNKNOWN | Details | |
| meth_setup_fo_output | 4898 | Frequency Output | msrc_UNKNOWN | Details | |
| meth_setup_do_output | 489D | Дискретные выходы | msrc_UNKNOWN | Details | |
| meth_setup_discrete_input | 489F | Цифровые входы | msrc_UNKNOWN | Details | |
| meth_setup_frequency_input | 48A1 | Frequency Input | msrc_UNKNOWN | Details | |
| meth_map_variables | 48A4 | Variable Mapping | msrc_UNKNOWN | Details | |
| method_special_units | 48A6 | Специальные единицы измерения | msrc_UNKNOWN | Details | |
| method_external_compensation | 48A9 | Внешнее давление / температура | msrc_UNKNOWN | Details | |
| method_GSV_setup | 48AB | Gas Standard Volume | msrc_UNKNOWN | Details | |
| method_display_variables | 48AE | Display Variables | msrc_UNKNOWN | Details | |
| method_display_precision | 48B0 | Decimal Places | msrc_UNKNOWN | Details | |
| meth_view_alert_severity | 48B2 | View Alert Severity | msrc_UNKNOWN | Details | |
| reset_gas_std_vol_total | 48B3 | Reset Total | Resets internal totalizers for Gas Standard Volume Total. | msrc_UNKNOWN | Details |
| reset_ed_ref_corr_vol_total | 48B4 | Reset Total | Сброс внутренних сумматоров для контрольного (исправленного) объемного расхода повышенной плотности. | msrc_UNKNOWN | Details |
| reset_api_ref_vol_total | 48B5 | Reset Total | Resets internal totalizers for API Reference (Standard) Volume Total | msrc_UNKNOWN | Details |
| reset_ed_net_mass_total | 48B6 | Reset Total | Сброс внутренних сумматоров для чистого массового расхода повышенной плотности | msrc_UNKNOWN | Details |
| reset_ed_net_vol_total | 48B7 | Reset Total | Сброс внутренних сумматоров для чистого объемного расхода повышенной плотности | msrc_UNKNOWN | Details |
| set_totalizer_reset_option | 48B8 | Set Totalizer Reset Option | msrc_UNKNOWN | Details | |
| perform_factory_zero | 48B9 | Restore Factory Zero | msrc_UNKNOWN | Details | |
| convert_To_Percent | 48BA | msrc_UNKNOWN | Details | ||
| convert_From_Percent | 48BB | msrc_UNKNOWN | Details | ||
| batch_method | 48BC | Batcher | msrc_UNKNOWN | Details | |
| meth_configure_i_o | 48BE | Inputs/Outputs | msrc_UNKNOWN | Details | |
| meth_communications | 48C2 | Communications | msrc_UNKNOWN | Details | |
| method_setup_burst | 47A7 | Set Up Burst Mode | msrc_UNKNOWN | Details | |
| perform_ack_all | 48C5 | Acknowledge All Alerts | msrc_UNKNOWN | Details | |
| set_FO_scaling | 48C6 | Set Frequency Output Scaling | msrc_UNKNOWN | Details | |
| set_FI_scaling | 48C7 | Настройка масштабирования частотного входа | msrc_UNKNOWN | Details | |
| write_alarm_severity_meth_a003 | 48C8 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a005 | 48C9 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a006 | 48CA | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a008 | 48CB | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a009 | 48CC | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a011 | 48CD | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a012 | 48CE | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a013 | 48CF | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a016 | 48D0 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a017 | 48D1 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a018 | 48D2 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a020 | 48D3 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a033 | 48D4 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a034 | 48D5 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a035 | 48D6 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a102 | 48D7 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a103 | 48D8 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a105 | 48D9 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a107 | 48DA | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a115 | 48DB | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a116 | 48DC | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a117 | 48DD | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a121 | 48DE | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a124 | 48DF | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a125 | 48E0 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a126 | 48E1 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a127 | 48E2 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a128 | 48E3 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a131 | 48E4 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a100 | 48E5 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a101 | 48E6 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a104 | 48E7 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a106 | 48E8 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a108 | 48E9 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a109 | 48EA | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a110 | 48EB | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a111 | 48EC | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a113 | 48ED | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a114 | 48EE | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a118 | 48EF | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a119 | 48F0 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a132 | 48F1 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a133 | 48F2 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a134 | 48F3 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a135 | 48F4 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| set_freq_input_scaling | 48F5 | Настройка масштабирования частотного входа | msrc_UNKNOWN | Details | |
| meth_meter_verification_online | 48F6 | Запуск | msrc_UNKNOWN | Details | |
| method_setup_event_trigger | 48F8 | Setup Event Trigger | msrc_UNKNOWN | Details | |
| meth_meter_verification_upload_results | 48FA | MV Upload Results | msrc_UNKNOWN | Details | |
| method_setup_schedule | 48FB | Начальная установка | msrc_UNKNOWN | Details | |
| meth_show_last_20_results | 48FD | Показать последние 20 результатов | msrc_UNKNOWN | Details | |
| method_refresh_alerts_375 | 4900 | Refresh Alerts | msrc_UNKNOWN | Details | |
| meth_burst_mode_375 | 4901 | msrc_UNKNOWN | Details | ||
| method_primary_purpose_variable_375 | 4902 | Primary Purpose Variables | msrc_UNKNOWN | Details | |
| method_primary_purpose_variable_gsv_375 | 4903 | Primary Purpose Variables | msrc_UNKNOWN | Details | |
| method_primary_purpose_variable_fi_375 | 4904 | Primary Purpose Variables | msrc_UNKNOWN | Details | |
| method_device_status_375 | 4905 | Device Status: Good | msrc_UNKNOWN | Details | |
| method_variable_summary_375 | 4906 | Variable Summary | msrc_UNKNOWN | Details | |
| method_variable_summary_fi_375 | 4907 | Variable Summary | msrc_UNKNOWN | Details | |
| method_variable_summary_gsv_375 | 4908 | Variable Summary | msrc_UNKNOWN | Details | |
| method_variable_summary_MB_375 | 4909 | Variable Summary | msrc_UNKNOWN | Details | |
| method_variable_summary_PM_375 | 490A | Variable Summary | msrc_UNKNOWN | Details | |
| method_variable_summary_CM_375 | 490B | Variable Summary | msrc_UNKNOWN | Details | |
| method_show_results_table_375 | 490C | Show Results Table | msrc_UNKNOWN | Details | |
| method_turn_off_schedule_375 | 490D | Расписание выключения | msrc_UNKNOWN | Details | |
| write_simulation_params_massflow_375 | 490E | Simulate Mass Flow Rate | msrc_UNKNOWN | Details | |
| write_simulation_params_temp_375 | 490F | Simulate Temperature | msrc_UNKNOWN | Details | |
| write_simulation_params_Density_375 | 4910 | Simulate Density | msrc_UNKNOWN | Details | |
| meth_enable_disable_write_protect | 4911 | Включить / отключить защиту от записи | msrc_UNKNOWN | Details | |
| method_enter_matrix | 4912 | Ввод матрицы | msrc_UNKNOWN | Details | |
| meth_reset_matrix_data | 4919 | Сброс данных матрицы | msrc_UNKNOWN | Details | |
| meth_reset_matrix_data_375 | 491A | Сброс данных матрицы | msrc_UNKNOWN | Details | |
| meth_setup_presets | 491B | Установка начальных настроек | msrc_UNKNOWN | Details | |
| write_discrete_assignment_meth_mv | 491D | Assign Discrete Action | Assigns a discrete to an action. Select none for no discrete assignment. | msrc_UNKNOWN | Details |
| read_discrete_assignment_meth_mv | 491E | Read Discrete Action Assignment | For a selected discrete action, reports the associated discrete assignment. | msrc_UNKNOWN | Details |
| review_discrete_assignment_meth_mv | 491F | Review All Discrete Actions | Cycles through the discrete actions and reports the associated discrete assignments. | msrc_UNKNOWN | Details |
| meth_ld_optimization | 4920 | Оптимизация LD | msrc_UNKNOWN | Details | |
| method_alert_a001 | 4921 | A001: EEPROM Error (Core Processor) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a001 | 4922 | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a002 | 4923 | A002: RAM Error (Core Processor) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a002 | 4924 | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a003_800 | 4DAB | A003: No Sensor Response | msrc_UNKNOWN | Details | |
| method_alert_a003_700 | 4DAC | A003: No Sensor Response | msrc_UNKNOWN | Details | |
| method_add_info_alert_a003 | 4926 | Дополнительная информация о вышеприведенном | msrc_UNKNOWN | Details | |
| method_alert_a004 | 4928 | A004: Выход за пределы диапазона температуры | msrc_UNKNOWN | Details | |
| method_add_info_alert_a004 | 4929 | Дополнительная информация о вышеприведенном | msrc_UNKNOWN | Details | |
| method_alert_a005 | 492A | A005: Mass Flow Overrange | msrc_UNKNOWN | Details | |
| method_add_info_alert_a005 | 492B | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_Curved_tube_a006 | 492C | A006: Требуется определение характеристик | msrc_UNKNOWN | Details | |
| method_add_info_alert_Curved_tube_a006 | 492D | Дополнительная информация о вышеприведенном | msrc_UNKNOWN | Details | |
| method_alert_T_series_a006 | 492E | A006: Требуется определение характеристик | msrc_UNKNOWN | Details | |
| method_add_info_alert_T_series_a006 | 492F | Дополнительная информация о вышеприведенном | msrc_UNKNOWN | Details | |
| method_alert_a008 | 4930 | A008: Выход за пределы диапазона плотности | msrc_UNKNOWN | Details | |
| method_add_info_alert_a008 | 4931 | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a009 | 4932 | A009: Инициализация/прогрев преобразователя | msrc_UNKNOWN | Details | |
| method_add_info_alert_a009 | 4933 | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a009_700 | 4DAD | A009: Инициализация/прогрев преобразователя | msrc_UNKNOWN | Details | |
| method_alert_a010 | 4934 | A010: Calibration Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a010 | 4935 | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a011 | 4936 | A011: Сбой калибровки нуля: Низкая | msrc_UNKNOWN | Details | |
| method_add_info_alert_a011 | 4937 | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a012 | 4938 | A012: Сбой калибровки нуля: Высокая | msrc_UNKNOWN | Details | |
| method_add_info_alert_a012 | 4939 | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a013 | 493A | A013: Сбой калибровки нуля: Нестабильная | msrc_UNKNOWN | Details | |
| method_add_info_alert_a013 | 493B | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a014 | 493C | A014: Transmitter Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a014 | 493D | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a016 | 493E | A016: Sensor RTD Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a016 | 493F | Дополнительная информация о вышеприведенном | msrc_UNKNOWN | Details | |
| method_alert_a017 | 4940 | A017: T-Series RTD Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a017 | 4941 | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a018 | 4942 | A018: EEPROM Error (Transmitter) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a018 | 4943 | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a019 | 4944 | A019: RAM Error (Transmitter) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a019 | 4945 | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_Curved_tube_a020 | 4946 | A020: Отсутствует значение калибровки расхода | msrc_UNKNOWN | Details | |
| method_add_info_alert_Curved_tube_a020 | 4947 | Дополнительная информация о вышеприведенном | msrc_UNKNOWN | Details | |
| method_alert_T_series_a020 | 4948 | A020: Отсутствует значение калибровки расхода | msrc_UNKNOWN | Details | |
| method_add_info_alert_T_series_a020 | 4949 | Дополнительная информация о вышеприведенном | msrc_UNKNOWN | Details | |
| method_alert_a021 | 494A | A021: No K1 Value | msrc_UNKNOWN | Details | |
| method_add_info_alert_a021 | 494B | Дополнительная информация о вышеприведенном | msrc_UNKNOWN | Details | |
| method_alert_a022 | 494C | A022: Configuration Database Corrupt (Core Processor) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a022 | 494D | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a023 | 494E | A023: Internal Totals Corrupt (Core Processor) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a023 | 494F | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a024 | 4950 | A024: Program Corrupt (Core Processor) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a024 | 4951 | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a025 | 4952 | A025: Boot Sector Fault (Core Processor) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a025 | 4953 | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a026 | 4954 | A026: Sensor/Transmitter Communications Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a026 | 4955 | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a027 | 4956 | A027: Security Breach | msrc_UNKNOWN | Details | |
| method_add_info_alert_a027 | 4957 | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a028 | 4958 | A028: Core Processor Write Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a028 | 4959 | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a029 | 495A | A029: PIC/Отказ связи с платой первого уровня | msrc_UNKNOWN | Details | |
| method_add_info_alert_a029 | 495B | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a032 | 495C | A032: Meter Verification in Progress: Outputs to Fault | msrc_UNKNOWN | Details | |
| method_alert_a032_online | 495D | A032: Outputs Fixed During Meter Verification | msrc_UNKNOWN | Details | |
| method_add_info_alert_a032 | 495E | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a033 | 495F | A033: No Right/Left Pickoff Signal | msrc_UNKNOWN | Details | |
| method_add_info_alert_a033 | 4960 | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a034 | 4961 | A034: Meter Verification Failed | msrc_UNKNOWN | Details | |
| method_add_info_alert_a034 | 4962 | Дополнительная информация о вышеприведенном | msrc_UNKNOWN | Details | |
| method_alert_a035 | 4963 | A035: Meter Verification Aborted | msrc_UNKNOWN | Details | |
| method_add_info_alert_a035 | 4964 | Дополнительная информация о вышеприведенном | msrc_UNKNOWN | Details | |
| method_alert_a100 | 4965 | A100: Токовый выход имеет предельное значение | msrc_UNKNOWN | Details | |
| method_add_info_alert_a100 | 4966 | Дополнительная информация о вышеприведенном | msrc_UNKNOWN | Details | |
| method_alert_a101 | 4967 | A101: Токовый выход имеет фиксированное значение | msrc_UNKNOWN | Details | |
| method_add_info_alert_a101 | 4968 | Дополнительная информация о вышеприведенном | msrc_UNKNOWN | Details | |
| method_alert_a102 | 4969 | A102: Drive Overrange | msrc_UNKNOWN | Details | |
| method_add_info_alert_a102 | 496A | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a103 | 496B | Основному процессору не удалось успешно сохранить сумматоры и описи при последнем выключении и приходится использовать ранее сохраненные значения. Эти значения могут иметь возраст не более двух часов. Преобразователь по-прежнему работоспособен. | msrc_UNKNOWN | Details | |
| method_add_info_alert_a103 | 496C | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a104 | 496D | A104: Calibration In Progress | msrc_UNKNOWN | Details | |
| method_add_info_alert_a104 | 496E | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a105 | 496F | A105: Slug Flow | msrc_UNKNOWN | Details | |
| method_add_info_alert_a105 | 4970 | Дополнительная информация о вышеприведенном | msrc_UNKNOWN | Details | |
| method_alert_a106 | 4971 | A106: Burst Mode Enabled | msrc_UNKNOWN | Details | |
| method_add_info_alert_a106 | 4972 | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a107 | 4973 | A107: Power Reset Occurred | msrc_UNKNOWN | Details | |
| method_add_info_alert_a107 | 4974 | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a108 | 4975 | A108: Single-Setpoint Event 1 ON | msrc_UNKNOWN | Details | |
| method_alert_a109 | 497A | A109: Single-Setpoint Event 2 ON | msrc_UNKNOWN | Details | |
| method_alert_a110 | 497F | A110: Frequency Output Saturated | msrc_UNKNOWN | Details | |
| method_add_info_alert_a110 | 4980 | Дополнительная информация о вышеприведенном | msrc_UNKNOWN | Details | |
| method_alert_a111 | 4981 | A111: Frequency Output Fixed | msrc_UNKNOWN | Details | |
| method_add_info_alert_a111 | 4982 | Дополнительная информация о вышеприведенном | msrc_UNKNOWN | Details | |
| method_alert_a113 | 4983 | A113: mA Output 2 Saturated | msrc_UNKNOWN | Details | |
| method_add_info_alert_a113 | 4984 | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a114 | 4985 | A114: Токовый выход 2 имеет фиксированное значение | msrc_UNKNOWN | Details | |
| method_add_info_alert_a114 | 4986 | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a115 | 4987 | A115: No External Input or Polled Data | msrc_UNKNOWN | Details | |
| method_add_info_alert_a115 | 4988 | Дополнительная информация о вышеприведенном | msrc_UNKNOWN | Details | |
| method_alert_a116 | 4989 | A116: Выход за пределы диапазона температуры (измерение для нефти) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a116 | 498A | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a117 | 498B | A117: Выход за пределы диапазона плотности (измерения для нефти) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a117 | 498C | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a118 | 498D | A118: Discrete Output Fixed | msrc_UNKNOWN | Details | |
| method_add_info_alert_a118 | 498E | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a119 | 498F | A119: Discrete Output 2 Fixed | msrc_UNKNOWN | Details | |
| method_add_info_alert_a119 | 4990 | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a120 | 4991 | A120: Curve Fit Failure (Concentration) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a120 | 4992 | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a121 | 4993 | A121: Предупреждение экстраполяции (измерение концентрации) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a121 | 4994 | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a124 | 4995 | A124: Frequency Input Saturated | msrc_UNKNOWN | Details | |
| method_add_info_alert_a124 | 4996 | Дополнительная информация о вышеприведенном | msrc_UNKNOWN | Details | |
| method_alert_a125 | 4997 | A125: Batch Timeout | msrc_UNKNOWN | Details | |
| method_add_info_alert_a125 | 4998 | Дополнительная информация о вышеприведенном | msrc_UNKNOWN | Details | |
| method_alert_a126 | 4999 | A126: Batch Overrun | msrc_UNKNOWN | Details | |
| method_add_info_alert_a126 | 499A | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a127 | 499B | A127: Batch No Reset | msrc_UNKNOWN | Details | |
| method_add_info_alert_a127 | 499C | Дополнительная информация о вышеприведенном | msrc_UNKNOWN | Details | |
| method_alert_a128 | 499D | A128: Batch/Fill No Start | msrc_UNKNOWN | Details | |
| method_add_info_alert_a128 | 499E | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a131 | 499F | A131: Meter Verification in Progress: Outputs to Last Measured Value | msrc_UNKNOWN | Details | |
| method_alert_a131_online | 49A0 | A131: Meter Verification in Progress | msrc_UNKNOWN | Details | |
| method_add_info_alert_a131 | 49A1 | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a132 | 49A2 | A132: Sensor Simulation Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_a132 | 49A3 | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a133 | 49A4 | A133: EEPROM Error (Display) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a133 | 49A5 | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a134 | 49A6 | A134: Ошибка памяти (дисплей) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a134 | 49A7 | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_a135 | 49A8 | A135: Ошибка связи преобразователя/дисплея | msrc_UNKNOWN | Details | |
| method_add_info_alert_a135 | 49A9 | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_discrete_event_1_active | 49AA | Discrete Event 1 Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_event_1_active | 49AB | Дополнительная информация о вышеприведенном | msrc_UNKNOWN | Details | |
| method_alert_discrete_event_2_active | 49AC | Discrete Event 2 Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_event_2_active | 49AD | Дополнительная информация о вышеприведенном | msrc_UNKNOWN | Details | |
| method_alert_discrete_event_3_active | 49AE | Discrete Event 3 Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_event_3_active | 49AF | Дополнительная информация о вышеприведенном | msrc_UNKNOWN | Details | |
| method_alert_discrete_event_4_active | 49B0 | Discrete Event 4 Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_event_4_active | 49B1 | Дополнительная информация о вышеприведенном | msrc_UNKNOWN | Details | |
| method_alert_discrete_event_5_active | 49B2 | Discrete Event 5 Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_event_5_active | 49B3 | Дополнительная информация о вышеприведенном | msrc_UNKNOWN | Details | |
| method_alert_discrete_input_active | 49B4 | Discrete Input Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_input_active | 49B5 | Дополнительная информация о вышеприведенном | msrc_UNKNOWN | Details | |
| method_alert_pv_out_of_limits | 49B6 | Первичная переменная выходит за предельное значение | msrc_UNKNOWN | Details | |
| method_add_info_alert_pv_out_of_limits | 49B7 | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_non_pv_out_of_limits | 49B8 | Непервичная переменная выходит за предельное значение | msrc_UNKNOWN | Details | |
| method_add_info_alert_non_pv_out_of_limits | 49B9 | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_pv_mA_output_saturated | 49BA | Токовый выход первичной переменной имеет предельное значение | msrc_UNKNOWN | Details | |
| method_add_info_alert_pv_mA_output_saturated | 49BB | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_pv_mA_output_fixed | 49BC | Токовый выход первичной переменной имеет фиксированное значение | msrc_UNKNOWN | Details | |
| method_add_info_alert_pv_mA_output_fixed | 49BD | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_cold_start | 49BE | Cold Start | msrc_UNKNOWN | Details | |
| method_add_info_alert_cold_start | 49BF | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_config_changed | 49C0 | Configuration Changed | msrc_UNKNOWN | Details | |
| method_add_info_alert_config_changed | 49C1 | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| method_alert_device_malfunction | 49C2 | Field Device Malfunction | msrc_UNKNOWN | Details | |
| method_add_info_alert_device_malfunction | 49C3 | Дополнительная информация о вышеприведенном отсутствует | msrc_UNKNOWN | Details | |
| meth_view_alert_severity_new | 4DAE | View Alert Severity | msrc_UNKNOWN | Details | |
| method_upload_mv_results_hh | 4DB0 | Upload Results Data from Device | msrc_UNKNOWN | Details | |
| meth_enable_disable_write_protect_hh | 4DB1 | Включить / отключить защиту от записи | msrc_UNKNOWN | Details | |
| reset_config_changed_flag | 4E62 | Reset Configuration Changed Flag | msrc_UNKNOWN | Details | |
| method_config_matrix | 4E63 | Configure Matrix | msrc_UNKNOWN | Details | |
| method_trim_cons_measure | 4E65 | Переменные процесса измерения концентрации при регулировке | msrc_UNKNOWN | Details | |
| meth_device_reset | 4E67 | Ð¡Ð±Ñ€Ð¾Ñ Ð¿Ð°Ñ€Ð°Ð¼ÐµÑ‚Ñ€Ð¾Ð² уÑтройÑтва | Сброс устройства - отправляет на электронное оборудование команду для выполнения сброса. Эта команда эквивалентна выключению и последующему включению питания полевого устройства | msrc_UNKNOWN | Details |
| restore_factory_configure | 4E68 | ВоÑÑтановл. заводÑк. конфигурации | msrc_UNKNOWN | Details | |
| deactivate_var_simulation | 4EFC | Отключите моделирование | msrc_UNKNOWN | Details | |
| SMV_basic | 4EFD | License Note | msrc_UNKNOWN | Details | |
| warning_message | 1017 | Установить ручн. реж. контура | msrc_UNKNOWN | Details | |
| scaled_dac_trim | 1005 | Scaled AO1 trim | Цифровая-аналоговая регулировка по масштабу - обеспечивает калибровку аналогового выхода, по внешнему образцовому прибору крайних рабочих точек аналогового выхода | msrc_UNKNOWN | Details |
| return_to_normal | 1016 | Отмена возврата в норм. сост. | msrc_UNKNOWN | Details | |
| leave_fixed_current_mode | 1003 | Выход из режима фикс. тока | Выход из режима фиксированного тока - выводит выбранный аналоговый выход из режима, в котором выход был зафиксирован в постоянное значение, и переводит выход в режим, в котором он соотвествует входным данным | msrc_UNKNOWN | Details |
| Name | ID | Label | Description | Type | Source |