Loading…
Loading…
| Name | ID | Label | Description | Type | Source |
|---|---|---|---|---|---|
| temp_offset_cal | 4300 | Perform Cal | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| temp_slope_cal | 4301 | Perform Cal | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| read_di_1_state | 4277 | Read Discrete In | Reads the state of the Discrete Input. | msrc_UNKNOWN | Details |
| read_di_2_state | 4278 | Read DI 2 | Reads the state of the Discrete Input. | msrc_UNKNOWN | Details |
| read_do_1_state | 4274 | Read DO 1 | Reads the state of the Discrete Output. | msrc_UNKNOWN | Details |
| read_do_2_state | 4275 | Read DO 2 | Reads the state of the Discrete Output. | msrc_UNKNOWN | Details |
| read_do_3_state | 4276 | Read DO 3 | Reads the state of the Discrete Output. | msrc_UNKNOWN | Details |
| refresh_alarm_history | 455C | Refresh Alarm Event Log | Uploads the 50 alarm history records from the device. This method takes approximately 30 sec to run. | msrc_UNKNOWN | Details |
| self_test | 426A | Self test | Instructs transmitter to perform internal self test. | msrc_UNKNOWN | Details |
| read_modbus_register | 4563 | Read Modbus Data | msrc_UNKNOWN | Details | |
| write_modbus_register | 4564 | Write Modbus Data | msrc_UNKNOWN | Details | |
| perform_varDiagnostic_Action_Code | 4522 | Perform Diagnostic Action | msrc_UNKNOWN | Details | |
| select_acknowledge_alarm | 455B | Acknowledge the selected alarm | msrc_UNKNOWN | Details | |
| scaled_dac_trim_ao2 | 4273 | Scaled AO2 trim | Digital to Analog Scaled Trim- Allows the calibration of the Analog Output with an external reference at the operating endpoints of the Analog Output | msrc_UNKNOWN | Details |
| pc1_stat | 42CB | Status | When set, indicates that the Discrete Event has reached its programmed trigger point. | msrc_UNKNOWN | Details |
| pc2_stat | 42CC | Status | When set, indicates that the Discrete Event has reached its programmed trigger point. | msrc_UNKNOWN | Details |
| pc3_stat | 42CD | Status | When set, indicates that the Discrete Event has reached its programmed trigger point. | msrc_UNKNOWN | Details |
| pc4_stat | 42CE | Status | When set, indicates that the Discrete Event has reached its programmed trigger point. | msrc_UNKNOWN | Details |
| pc5_stat | 42CF | Status | When set, indicates that the Discrete Event has reached its programmed trigger point. | msrc_UNKNOWN | Details |
| do1_stat | 4308 | Status DO1 | When set,indicates that Discrete Output 1 has been triggered. | msrc_UNKNOWN | Details |
| view_xmtr_status | 4242 | View status | Reports any currently active device status information. | msrc_UNKNOWN | Details |
| sensor_setup_meth | 427C | Sensor Selection | This selection must be made to enable calibration parameters to be visible for the selected sensor type. | msrc_UNKNOWN | Details |
| meth_characterize_sensor | 4884 | Sensor | msrc_UNKNOWN | Details | |
| api_setup | 42C0 | Petroleum Measurement Set Up | This method will step the user through setting up the API parameters. | msrc_UNKNOWN | Details |
| mmi_auto_zero | 42B8 | Perform Auto Zero | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| dencal_a | 42D0 | First Point | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| dencal_b | 42D1 | Second Point | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| dencal_c | 42D2 | Third Point | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| dencal_d | 42D3 | Fourth Point | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| dencal_fd | 42D4 | Flowing Density | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| write_discrete_assignment_meth | 4293 | Assign Discrete Action | Assigns a discrete to an action. Select none for no discrete assignment. | msrc_UNKNOWN | Details |
| read_discrete_assignment_meth | 4294 | Read Discrete Action Assignment | For a selected discrete action, reports the associated discrete assignment. | msrc_UNKNOWN | Details |
| review_discrete_assignment_meth | 4295 | Review All Discrete Actions | Cycles through the discrete actions and reports the associated discrete assignments. | msrc_UNKNOWN | Details |
| fix_do_1 | 426E | Discrete Output 1 Test | Outputs a user-programmed discrete state to the discrete output. | msrc_UNKNOWN | Details |
| fix_do_2 | 426F | Discrete Output 2 Test | Outputs a user-programmed discrete state to the discrete output. | msrc_UNKNOWN | Details |
| fix_do_3 | 4270 | Discrete Output 3 Test | Outputs a user-programmed discrete state to the discrete output. | msrc_UNKNOWN | Details |
| fix_frequency | 426D | Frequency Output Test | Outputs a user-programmed frequency to the frequency output. | msrc_UNKNOWN | Details |
| fix_ao_1 | 426B | mA Output 1 Loop Test | Fix mA output- Allows the User to manually manipulate a selected mA output to a selected constant output value. | msrc_UNKNOWN | Details |
| analog_1_trim | 4271 | Trim mA Output 1 | Digital to Analog Trim- Allows the calibration of a selected mA output with an external reference at the operating endpoints of the mA output. | msrc_UNKNOWN | Details |
| fix_ao_2 | 426C | mA Output 2 Loop Test | Fix mA output- Allows the User to manually manipulate a selected mA output to a selected constant output value. | msrc_UNKNOWN | Details |
| analog_2_trim | 4272 | Trim mA Output 2 | Digital to Analog Trim- Allows the calibration of a selected mA output with an external reference at the operating endpoints of the mA output. | msrc_UNKNOWN | Details |
| start_total | 4264 | Start | Enables the internal totalizers to begin counting. | msrc_UNKNOWN | Details |
| stop_total | 4265 | Stop | Prevents the internal totalizers from counting. | msrc_UNKNOWN | Details |
| reset_all_total | 4266 | Reset All | Resets internal totalizers. | msrc_UNKNOWN | Details |
| reset_mass_total | 4267 | Reset Total | Resets internal totalizers. | msrc_UNKNOWN | Details |
| reset_vol_total | 4268 | Reset Total | Resets internal totalizers. | msrc_UNKNOWN | Details |
| batch_ctl_meth | 4269 | Batcher cntrl | Allows the user to start, stop, end, inhibit, reset or resume a batch. Also allows user to print batch ticket or inhibit batch totalizers. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth | 429B | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_new | 4DA8 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| read_alarm_severity_meth | 429C | Read Severity | Reports the severity level of the selected alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| review_alarm_severity_meth | 429D | Review Severity | Reports the severity level of all the alarms. | msrc_UNKNOWN | Details |
| abort_auto_zero | 42FF | Aborts Auto Zero operation and continues to use previous zero offset value. | msrc_UNKNOWN | Details | |
| leave_fixed_do1_mode | 4302 | Exits fixed mode and returns the discrete output to its active state. | msrc_UNKNOWN | Details | |
| leave_fixed_do2_mode | 4303 | Exits fixed mode and returns the discrete output to its active state. | msrc_UNKNOWN | Details | |
| leave_fixed_do3_mode | 4304 | Exits fixed mode and returns the discrete output to its active state. | msrc_UNKNOWN | Details | |
| leave_fixed_freq_mode | 4305 | Exits fixed mode and returns the frequency output to its active state. | msrc_UNKNOWN | Details | |
| mmi_leave_analog_fixed_current_mode1 | 4306 | Leaving fixed current mode | Leaving Fixed Current Mode- Takes the selected mA output out of a mode where the output was a constant value, and returns the output to a mode where the output then tracks the input. | msrc_UNKNOWN | Details |
| mmi_leave_analog_fixed_current_mode2 | 4307 | Leaving fixed current mode | Leaving Fixed Current Mode- Takes the selected mA output out of a mode where the output was a constant value, and returns the output to a mode where the output then tracks the input. | msrc_UNKNOWN | Details |
| abort_send | 42FE | msrc_UNKNOWN | Details | ||
| must_send_pv | 4001 | msrc_UNKNOWN | Details | ||
| must_send_sv | 4003 | msrc_UNKNOWN | Details | ||
| must_send_tv | 4005 | msrc_UNKNOWN | Details | ||
| must_send_event_var | 4309 | msrc_UNKNOWN | Details | ||
| must_send_units | 4010 | msrc_UNKNOWN | Details | ||
| must_send_scaling | 4129 | msrc_UNKNOWN | Details | ||
| must_send_fi_scaling | 4130 | msrc_UNKNOWN | Details | ||
| must_send_fault_level | 414A | msrc_UNKNOWN | Details | ||
| write_simulation_params_massflow | 4560 | Simulate Mass Flow Rate | msrc_UNKNOWN | Details | |
| write_simulation_params_temp | 4561 | Simulate Temperature | msrc_UNKNOWN | Details | |
| write_simulation_params_Density | 4562 | Simulate Density | msrc_UNKNOWN | Details | |
| meth_meter_verification | 4525 | Meter Verification | Starts meter verification and shows the result PASS or FAIL. This procedure takes upto 4 minutes. | msrc_UNKNOWN | Details |
| abort_meter_verification | 4565 | msrc_UNKNOWN | Details | ||
| meth_set_up_real_time_clock | 488D | Real Time Clock | msrc_UNKNOWN | Details | |
| meth_setup_mA_output_1 | 488F | mA Outputs | msrc_UNKNOWN | Details | |
| meth_setup_fo_output | 4898 | Frequency Output | msrc_UNKNOWN | Details | |
| meth_setup_do_output | 489D | Discrete Outputs | msrc_UNKNOWN | Details | |
| meth_setup_discrete_input | 489F | Discrete Inputs | msrc_UNKNOWN | Details | |
| meth_setup_frequency_input | 48A1 | Frequency Input | msrc_UNKNOWN | Details | |
| meth_map_variables | 48A4 | Variable Mapping | msrc_UNKNOWN | Details | |
| method_special_units | 48A6 | Special Units | msrc_UNKNOWN | Details | |
| method_external_compensation | 48A9 | External Pressure/Temperature | msrc_UNKNOWN | Details | |
| method_GSV_setup | 48AB | Gas Standard Volume | msrc_UNKNOWN | Details | |
| method_display_variables | 48AE | Display Variables | msrc_UNKNOWN | Details | |
| method_display_precision | 48B0 | Decimal Places | msrc_UNKNOWN | Details | |
| meth_view_alert_severity | 48B2 | View Alert Severity | msrc_UNKNOWN | Details | |
| reset_gas_std_vol_total | 48B3 | Reset Total | Resets internal totalizers for Gas Standard Volume Total. | msrc_UNKNOWN | Details |
| reset_ed_ref_corr_vol_total | 48B4 | Reset Total | Resets internal totalizers for Enhanced Density Reference (Corrected) Volume Total. | msrc_UNKNOWN | Details |
| reset_api_ref_vol_total | 48B5 | Reset Total | Resets internal totalizers for API Reference (Standard) Volume Total | msrc_UNKNOWN | Details |
| reset_ed_net_mass_total | 48B6 | Reset Total | Resets internal totalizers Enhanced Density Net Mass Total. | msrc_UNKNOWN | Details |
| reset_ed_net_vol_total | 48B7 | Reset Total | Resets internal totalizers for Enhanced Density Net Volume Total. | msrc_UNKNOWN | Details |
| set_totalizer_reset_option | 48B8 | Set Totalizer Reset Option | msrc_UNKNOWN | Details | |
| perform_factory_zero | 48B9 | Restore Factory Zero | msrc_UNKNOWN | Details | |
| convert_To_Percent | 48BA | msrc_UNKNOWN | Details | ||
| convert_From_Percent | 48BB | msrc_UNKNOWN | Details | ||
| batch_method | 48BC | Batcher | msrc_UNKNOWN | Details | |
| meth_configure_i_o | 48BE | Inputs/Outputs | msrc_UNKNOWN | Details | |
| meth_communications | 48C2 | Communications | msrc_UNKNOWN | Details | |
| method_setup_burst | 47A7 | Set Up Burst Mode | msrc_UNKNOWN | Details | |
| perform_ack_all | 48C5 | Acknowledge All Alerts | msrc_UNKNOWN | Details | |
| set_FO_scaling | 48C6 | Set Frequency Output Scaling | msrc_UNKNOWN | Details | |
| set_FI_scaling | 48C7 | Set Frequency Input Scaling | msrc_UNKNOWN | Details | |
| write_alarm_severity_meth_a003 | 48C8 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a005 | 48C9 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a006 | 48CA | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a008 | 48CB | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a009 | 48CC | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a011 | 48CD | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a012 | 48CE | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a013 | 48CF | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a016 | 48D0 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a017 | 48D1 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a018 | 48D2 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a020 | 48D3 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a033 | 48D4 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a034 | 48D5 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a035 | 48D6 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a102 | 48D7 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a103 | 48D8 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a105 | 48D9 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a107 | 48DA | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a115 | 48DB | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a116 | 48DC | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a117 | 48DD | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a121 | 48DE | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a124 | 48DF | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a125 | 48E0 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a126 | 48E1 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a127 | 48E2 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a128 | 48E3 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a131 | 48E4 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a100 | 48E5 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a101 | 48E6 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a104 | 48E7 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a106 | 48E8 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a108 | 48E9 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a109 | 48EA | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a110 | 48EB | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a111 | 48EC | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a113 | 48ED | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a114 | 48EE | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a118 | 48EF | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a119 | 48F0 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a132 | 48F1 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a133 | 48F2 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a134 | 48F3 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a135 | 48F4 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| set_freq_input_scaling | 48F5 | Set Frequency Input Scaling | msrc_UNKNOWN | Details | |
| meth_meter_verification_online | 48F6 | Start | msrc_UNKNOWN | Details | |
| method_setup_event_trigger | 48F8 | Setup Event Trigger | msrc_UNKNOWN | Details | |
| meth_meter_verification_upload_results | 48FA | MV Upload Results | msrc_UNKNOWN | Details | |
| method_setup_schedule | 48FB | Setup | msrc_UNKNOWN | Details | |
| meth_show_last_20_results | 48FD | Show Last 20 Results | msrc_UNKNOWN | Details | |
| method_refresh_alerts_375 | 4900 | Refresh Alerts | msrc_UNKNOWN | Details | |
| meth_burst_mode_375 | 4901 | msrc_UNKNOWN | Details | ||
| method_primary_purpose_variable_375 | 4902 | Primary Purpose Variables | msrc_UNKNOWN | Details | |
| method_primary_purpose_variable_gsv_375 | 4903 | Primary Purpose Variables | msrc_UNKNOWN | Details | |
| method_primary_purpose_variable_fi_375 | 4904 | Primary Purpose Variables | msrc_UNKNOWN | Details | |
| method_device_status_375 | 4905 | Device Status: Good | msrc_UNKNOWN | Details | |
| method_variable_summary_375 | 4906 | Variable Summary | msrc_UNKNOWN | Details | |
| method_variable_summary_fi_375 | 4907 | Variable Summary | msrc_UNKNOWN | Details | |
| method_variable_summary_gsv_375 | 4908 | Variable Summary | msrc_UNKNOWN | Details | |
| method_variable_summary_MB_375 | 4909 | Variable Summary | msrc_UNKNOWN | Details | |
| method_variable_summary_PM_375 | 490A | Variable Summary | msrc_UNKNOWN | Details | |
| method_variable_summary_CM_375 | 490B | Variable Summary | msrc_UNKNOWN | Details | |
| method_show_results_table_375 | 490C | Show Results Table | msrc_UNKNOWN | Details | |
| method_turn_off_schedule_375 | 490D | Turn Off Schedule | msrc_UNKNOWN | Details | |
| write_simulation_params_massflow_375 | 490E | Simulate Mass Flow Rate | msrc_UNKNOWN | Details | |
| write_simulation_params_temp_375 | 490F | Simulate Temperature | msrc_UNKNOWN | Details | |
| write_simulation_params_Density_375 | 4910 | Simulate Density | msrc_UNKNOWN | Details | |
| meth_enable_disable_write_protect | 4911 | Enable/Disable Write Protect | msrc_UNKNOWN | Details | |
| method_enter_matrix | 4912 | Enter Matrix | msrc_UNKNOWN | Details | |
| meth_reset_matrix_data | 4919 | Reset Matrix Data | msrc_UNKNOWN | Details | |
| meth_reset_matrix_data_375 | 491A | Reset Matrix Data | msrc_UNKNOWN | Details | |
| meth_setup_presets | 491B | Setup Presets | msrc_UNKNOWN | Details | |
| write_discrete_assignment_meth_mv | 491D | Assign Discrete Action | Assigns a discrete to an action. Select none for no discrete assignment. | msrc_UNKNOWN | Details |
| read_discrete_assignment_meth_mv | 491E | Read Discrete Action Assignment | For a selected discrete action, reports the associated discrete assignment. | msrc_UNKNOWN | Details |
| review_discrete_assignment_meth_mv | 491F | Review All Discrete Actions | Cycles through the discrete actions and reports the associated discrete assignments. | msrc_UNKNOWN | Details |
| meth_ld_optimization | 4920 | LD Optimization | msrc_UNKNOWN | Details | |
| method_alert_a001 | 4921 | A001: EEPROM Error (Core Processor) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a001 | 4922 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a002 | 4923 | A002: RAM Error (Core Processor) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a002 | 4924 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a003_800 | 4DAB | A003: No Sensor Response | msrc_UNKNOWN | Details | |
| method_alert_a003_700 | 4DAC | A003: No Sensor Response | msrc_UNKNOWN | Details | |
| method_add_info_alert_a003 | 4926 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a004 | 4928 | A004: Temperature Overrange | msrc_UNKNOWN | Details | |
| method_add_info_alert_a004 | 4929 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a005 | 492A | A005: Mass Flow Overrange | msrc_UNKNOWN | Details | |
| method_add_info_alert_a005 | 492B | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_Curved_tube_a006 | 492C | A006: Characterization Required | msrc_UNKNOWN | Details | |
| method_add_info_alert_Curved_tube_a006 | 492D | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_T_series_a006 | 492E | A006: Characterization Required | msrc_UNKNOWN | Details | |
| method_add_info_alert_T_series_a006 | 492F | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a008 | 4930 | A008: Density Overrange | msrc_UNKNOWN | Details | |
| method_add_info_alert_a008 | 4931 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a009 | 4932 | A009: Transmitter Initializing/Warming Up | msrc_UNKNOWN | Details | |
| method_add_info_alert_a009 | 4933 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a009_700 | 4DAD | A009: Transmitter Initializing/Warming Up | msrc_UNKNOWN | Details | |
| method_alert_a010 | 4934 | A010: Calibration Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a010 | 4935 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a011 | 4936 | A011: Zero Calibration Failed: Low | msrc_UNKNOWN | Details | |
| method_add_info_alert_a011 | 4937 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a012 | 4938 | A012: Zero Calibration Failed: High | msrc_UNKNOWN | Details | |
| method_add_info_alert_a012 | 4939 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a013 | 493A | A013: Zero Calibration Failed: Unstable | msrc_UNKNOWN | Details | |
| method_add_info_alert_a013 | 493B | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a014 | 493C | A014: Transmitter Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a014 | 493D | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a016 | 493E | A016: Sensor RTD Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a016 | 493F | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a017 | 4940 | A017: T-Series RTD Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a017 | 4941 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a018 | 4942 | A018: EEPROM Error (Transmitter) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a018 | 4943 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a019 | 4944 | A019: RAM Error (Transmitter) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a019 | 4945 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_Curved_tube_a020 | 4946 | A020: No Flow Calibration Value | msrc_UNKNOWN | Details | |
| method_add_info_alert_Curved_tube_a020 | 4947 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_T_series_a020 | 4948 | A020: No Flow Calibration Value | msrc_UNKNOWN | Details | |
| method_add_info_alert_T_series_a020 | 4949 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a021 | 494A | A021: No K1 Value | msrc_UNKNOWN | Details | |
| method_add_info_alert_a021 | 494B | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a022 | 494C | A022: Configuration Database Corrupt (Core Processor) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a022 | 494D | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a023 | 494E | A023: Internal Totals Corrupt (Core Processor) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a023 | 494F | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a024 | 4950 | A024: Program Corrupt (Core Processor) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a024 | 4951 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a025 | 4952 | A025: Boot Sector Fault (Core Processor) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a025 | 4953 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a026 | 4954 | A026: Sensor/Transmitter Communications Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a026 | 4955 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a027 | 4956 | A027: Security Breach | msrc_UNKNOWN | Details | |
| method_add_info_alert_a027 | 4957 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a028 | 4958 | A028: Core Processor Write Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a028 | 4959 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a029 | 495A | A029: PIC/Daughterboard Communication Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a029 | 495B | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a032 | 495C | A032: Meter Verification in Progress: Outputs to Fault | msrc_UNKNOWN | Details | |
| method_alert_a032_online | 495D | A032: Outputs Fixed During Meter Verification | msrc_UNKNOWN | Details | |
| method_add_info_alert_a032 | 495E | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a033 | 495F | A033: No Right/Left Pickoff Signal | msrc_UNKNOWN | Details | |
| method_add_info_alert_a033 | 4960 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a034 | 4961 | A034: Meter Verification Failed | msrc_UNKNOWN | Details | |
| method_add_info_alert_a034 | 4962 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a035 | 4963 | A035: Meter Verification Aborted | msrc_UNKNOWN | Details | |
| method_add_info_alert_a035 | 4964 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a100 | 4965 | A100: mA Output Saturated | msrc_UNKNOWN | Details | |
| method_add_info_alert_a100 | 4966 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a101 | 4967 | A101: mA Output Fixed | msrc_UNKNOWN | Details | |
| method_add_info_alert_a101 | 4968 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a102 | 4969 | A102: Drive Overrange | msrc_UNKNOWN | Details | |
| method_add_info_alert_a102 | 496A | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a103 | 496B | The core processor was unable to successfully store the totalizers and inventories on the last power down and must rely on the previously saved values. These values may be up to two hours old. The transmitter is still functional. | msrc_UNKNOWN | Details | |
| method_add_info_alert_a103 | 496C | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a104 | 496D | A104: Calibration In Progress | msrc_UNKNOWN | Details | |
| method_add_info_alert_a104 | 496E | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a105 | 496F | A105: Slug Flow | msrc_UNKNOWN | Details | |
| method_add_info_alert_a105 | 4970 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a106 | 4971 | A106: Burst Mode Enabled | msrc_UNKNOWN | Details | |
| method_add_info_alert_a106 | 4972 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a107 | 4973 | A107: Power Reset Occurred | msrc_UNKNOWN | Details | |
| method_add_info_alert_a107 | 4974 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a108 | 4975 | A108: Single-Setpoint Event 1 ON | msrc_UNKNOWN | Details | |
| method_alert_a109 | 497A | A109: Single-Setpoint Event 2 ON | msrc_UNKNOWN | Details | |
| method_alert_a110 | 497F | A110: Frequency Output Saturated | msrc_UNKNOWN | Details | |
| method_add_info_alert_a110 | 4980 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a111 | 4981 | A111: Frequency Output Fixed | msrc_UNKNOWN | Details | |
| method_add_info_alert_a111 | 4982 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a113 | 4983 | A113: mA Output 2 Saturated | msrc_UNKNOWN | Details | |
| method_add_info_alert_a113 | 4984 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a114 | 4985 | A114: mA Output 2 Fixed | msrc_UNKNOWN | Details | |
| method_add_info_alert_a114 | 4986 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a115 | 4987 | A115: No External Input or Polled Data | msrc_UNKNOWN | Details | |
| method_add_info_alert_a115 | 4988 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a116 | 4989 | A116: Temperature Overrange (Petroleum Measurement) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a116 | 498A | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a117 | 498B | A117: Density Overrange (Petroleum Measurement) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a117 | 498C | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a118 | 498D | A118: Discrete Output Fixed | msrc_UNKNOWN | Details | |
| method_add_info_alert_a118 | 498E | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a119 | 498F | A119: Discrete Output 2 Fixed | msrc_UNKNOWN | Details | |
| method_add_info_alert_a119 | 4990 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a120 | 4991 | A120: Curve Fit Failure (Concentration) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a120 | 4992 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a121 | 4993 | A121: Extrapolation Alert (Concentration Measurement) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a121 | 4994 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a124 | 4995 | A124: Frequency Input Saturated | msrc_UNKNOWN | Details | |
| method_add_info_alert_a124 | 4996 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a125 | 4997 | A125: Batch Timeout | msrc_UNKNOWN | Details | |
| method_add_info_alert_a125 | 4998 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a126 | 4999 | A126: Batch Overrun | msrc_UNKNOWN | Details | |
| method_add_info_alert_a126 | 499A | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a127 | 499B | A127: Batch No Reset | msrc_UNKNOWN | Details | |
| method_add_info_alert_a127 | 499C | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a128 | 499D | A128: Batch/Fill No Start | msrc_UNKNOWN | Details | |
| method_add_info_alert_a128 | 499E | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a131 | 499F | A131: Meter Verification in Progress: Outputs to Last Measured Value | msrc_UNKNOWN | Details | |
| method_alert_a131_online | 49A0 | A131: Meter Verification in Progress | msrc_UNKNOWN | Details | |
| method_add_info_alert_a131 | 49A1 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a132 | 49A2 | A132: Sensor Simulation Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_a132 | 49A3 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a133 | 49A4 | A133: EEPROM Error (Display) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a133 | 49A5 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a134 | 49A6 | A134: Memory Error (Display) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a134 | 49A7 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a135 | 49A8 | A135: Transmitter/Display Communications Error | msrc_UNKNOWN | Details | |
| method_add_info_alert_a135 | 49A9 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_discrete_event_1_active | 49AA | Discrete Event 1 Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_event_1_active | 49AB | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_discrete_event_2_active | 49AC | Discrete Event 2 Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_event_2_active | 49AD | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_discrete_event_3_active | 49AE | Discrete Event 3 Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_event_3_active | 49AF | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_discrete_event_4_active | 49B0 | Discrete Event 4 Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_event_4_active | 49B1 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_discrete_event_5_active | 49B2 | Discrete Event 5 Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_event_5_active | 49B3 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_discrete_input_active | 49B4 | Discrete Input Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_input_active | 49B5 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_pv_out_of_limits | 49B6 | Primary Variable Out of Limits | msrc_UNKNOWN | Details | |
| method_add_info_alert_pv_out_of_limits | 49B7 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_non_pv_out_of_limits | 49B8 | Non-Primary Variable Out of Limits | msrc_UNKNOWN | Details | |
| method_add_info_alert_non_pv_out_of_limits | 49B9 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_pv_mA_output_saturated | 49BA | Primary Variable mA Output Saturated | msrc_UNKNOWN | Details | |
| method_add_info_alert_pv_mA_output_saturated | 49BB | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_pv_mA_output_fixed | 49BC | Primary Variable mA Output Fixed | msrc_UNKNOWN | Details | |
| method_add_info_alert_pv_mA_output_fixed | 49BD | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_cold_start | 49BE | Cold Start | msrc_UNKNOWN | Details | |
| method_add_info_alert_cold_start | 49BF | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_config_changed | 49C0 | Configuration Changed | msrc_UNKNOWN | Details | |
| method_add_info_alert_config_changed | 49C1 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_device_malfunction | 49C2 | Field Device Malfunction | msrc_UNKNOWN | Details | |
| method_add_info_alert_device_malfunction | 49C3 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| meth_view_alert_severity_new | 4DAE | View Alert Severity | msrc_UNKNOWN | Details | |
| method_upload_mv_results_hh | 4DB0 | Upload Results Data from Device | msrc_UNKNOWN | Details | |
| meth_enable_disable_write_protect_hh | 4DB1 | Enable/Disable Write Protect | msrc_UNKNOWN | Details | |
| reset_config_changed_flag | 4E62 | Reset Configuration Changed Flag | msrc_UNKNOWN | Details | |
| method_config_matrix | 4E63 | Configure Matrix | msrc_UNKNOWN | Details | |
| method_trim_cons_measure | 4E65 | Trim Concentration Measurement Process Variables | msrc_UNKNOWN | Details | |
| meth_device_reset | 4E67 | Device Reset | Device Reset- Commands the electronics to perform a reset. This is equivalent to cycling the power off and then back on to the field device. | msrc_UNKNOWN | Details |
| restore_factory_configure | 4E68 | Restore Factory Configuration | msrc_UNKNOWN | Details | |
| deactivate_var_simulation | 4EFC | Disable Simulation | msrc_UNKNOWN | Details | |
| SMV_basic | 4EFD | License Note | msrc_UNKNOWN | Details | |
| warning_message | 1017 | Set loop to manual | msrc_UNKNOWN | Details | |
| scaled_dac_trim | 1005 | Scaled AO1 trim | Digital to Analog Scaled Trim- Allows the calibration of the Analog Output with an external reference at the operating endpoints of the Analog Output | msrc_UNKNOWN | Details |
| return_to_normal | 1016 | Aborting return to normal | msrc_UNKNOWN | Details | |
| leave_fixed_current_mode | 1003 | Leaving fixed crnt mode | Leaving Fixed Current Mode- Takes the Analog Output out of a mode where the output was a constant value, and returns the output to a mode where the output tracks the input | msrc_UNKNOWN | Details |
| Name | ID | Label | Description | Type | Source |