Loading…
Loading…
| Name | ID | Label | Description | Type | Source |
|---|---|---|---|---|---|
| sensor_setup_meth | 4165 | Sensor Selection | This selection must be made to enable calibration parameters to be visible for the selected sensor type. | msrc_UNKNOWN | Details |
| set_chanb | 4185 | Freq/DO Setup | This function will allow the user to setup channel B to act as a frequency output or a discrete output. The appropriate configuration parameters will be displayed to the user once this selection has been made. | msrc_UNKNOWN | Details |
| mmi_auto_zero | 417B | Perform Auto Zero | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| dencal_a | 4186 | First Point | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| dencal_b | 4187 | Second Point | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| dencal_c | 4188 | Third Point | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| dencal_d | 4189 | Fourth Point | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| dencal_fd | 418A | Flowing Density | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| temp_offset_cal | 41AA | Perform Cal | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| temp_slope_cal | 41AB | Perform Cal | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| fix_do_1 | 4207 | Discrete Output Test | Outputs a user-programmed discrete state to the discrete output. | msrc_UNKNOWN | Details |
| leave_fixed_do1_mode | 4218 | Exits fixed mode and returns the discrete output to its active state. | msrc_UNKNOWN | Details | |
| fix_frequency | 4161 | Frequency Output Test | Outputs a user-programmed frequency to the frequency output. | msrc_UNKNOWN | Details |
| fix_ao_1 | 415F | mA Output 1 Loop Test | Fix Analog Output- Allows the User to manually manipulate a selected Analog Output to a selected constant output value | msrc_UNKNOWN | Details |
| analog_1_trim | 4144 | Trim mA Output 1 | Digital to Analog Trim- Allows the calibration of a selected Analog Output with an external reference at the operating endpoints of the Analog Output | msrc_UNKNOWN | Details |
| fix_ao_2 | 4160 | mA Output 2 Loop Test | Fix Analog Output- Allows the User to manually manipulate a selected Analog Output to a selected constant output value | msrc_UNKNOWN | Details |
| analog_2_trim | 4145 | Trim mA Output 2 | Digital to Analog Trim- Allows the calibration of a selected Analog Output with an external reference at the operating endpoints of the Analog Output | msrc_UNKNOWN | Details |
| api_setup | 4217 | Petroleum Measurement Setup | This method will step the user through setting up the API parameters. | msrc_UNKNOWN | Details |
| self_test | 415E | Self test | Instructs transmitter to perform internal self test. | msrc_UNKNOWN | Details |
| start_total | 4153 | Start | Enables the internal totalizers to begin counting. | msrc_UNKNOWN | Details |
| stop_total | 4154 | Stop | Prevents the internal totalizers from counting. | msrc_UNKNOWN | Details |
| reset_all_total | 4155 | Reset All | Resets internal totalizers. | msrc_UNKNOWN | Details |
| reset_mass_total | 4156 | Reset Total | Resets internal totalizers. | msrc_UNKNOWN | Details |
| reset_vol_total | 4157 | Reset Total | Resets internal totalizers. | msrc_UNKNOWN | Details |
| alarm1_stat | 4179 | Status Event1 | When set, indicates that Event 1 has reached its programmed setpoint. | msrc_UNKNOWN | Details |
| alarm2_stat | 417A | Status Event2 | When set, indicates that Event 2 has reached its programmed setpoint. | msrc_UNKNOWN | Details |
| do1_stat | 4178 | Status DO1 | When set, indicates that DO 1 has been triggered. | msrc_UNKNOWN | Details |
| view_xmtr_status | 413F | View status | Reports any currently active device status information. | msrc_UNKNOWN | Details |
| scaled_dac_trim_ao2 | 4146 | Scaled AO2 trim | Digital to Analog Scaled Trim- Allows the calibration of the Analog Output with an external reference at the operating endpoints of the Analog Output | msrc_UNKNOWN | Details |
| abort_auto_zero | 41A8 | Aborts Auto Zero operation and continues to use previous zero offset value. | msrc_UNKNOWN | Details | |
| leave_fixed_freq_mode | 41AC | Exits fixed mode and returns the frequency output to its active state. | msrc_UNKNOWN | Details | |
| mmi_leave_analog_fixed_current_mode1 | 41AD | Leaving fixed crnt mode | Leaving Fixed Current Mode- Takes the selected Analog Output out of a mode where the output was a constant value, and returns the output to a mode where the output then tracks the input | msrc_UNKNOWN | Details |
| mmi_leave_analog_fixed_current_mode2 | 41AE | Leaving fixed crnt mode | Leaving Fixed Current Mode- Takes the selected Analog Output out of a mode where the output was a constant value, and returns the output to a mode where the output then tracks the input | msrc_UNKNOWN | Details |
| abort_send | 41A9 | msrc_UNKNOWN | Details | ||
| must_send_fault_level | 41FA | msrc_UNKNOWN | Details | ||
| must_send_pv | 4001 | msrc_UNKNOWN | Details | ||
| must_send_sv | 4003 | msrc_UNKNOWN | Details | ||
| must_send_tv | 4005 | msrc_UNKNOWN | Details | ||
| must_send_event_var | 41AF | msrc_UNKNOWN | Details | ||
| must_send_units | 400A | msrc_UNKNOWN | Details | ||
| must_send_scaling | 40B7 | msrc_UNKNOWN | Details | ||
| read_modbus_register | 448E | Read Modbus Data | msrc_UNKNOWN | Details | |
| write_modbus_register | 448F | Write Modbus Data | msrc_UNKNOWN | Details | |
| write_alarm_severity_meth | 4445 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| meth_view_alert_severity | 4861 | View Alert Severity | msrc_UNKNOWN | Details | |
| read_alarm_severity_meth | 4446 | Read Severity | Reports the severity level of the selected alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| review_alarm_severity_meth | 4447 | Review Severity (All) | Reports the severity level of all the alarms. | msrc_UNKNOWN | Details |
| select_acknowledge_alarm | 4448 | Acknowledge the selected alarm | msrc_UNKNOWN | Details | |
| refresh_alarm_history | 444A | Refresh Alarm Event Log | Uploads the 50 alarm history records from the device. This method takes approximately 30 sec to run. | msrc_UNKNOWN | Details |
| perform_varDiagnostic_Action_Code | 4433 | Perform Diagnostic Action | msrc_UNKNOWN | Details | |
| write_discrete_assignment_meth | 447D | Assign Discrete Action | Assigns a discrete to an action. Select none for no discrete assignment. | msrc_UNKNOWN | Details |
| read_discrete_assignment_meth | 447E | Read Discrete Action Assignment | For a selected discrete action, reports the associated discrete assignment. | msrc_UNKNOWN | Details |
| review_discrete_assignment_meth | 447F | Review All Discrete Actions | Cycles through the discrete actions and reports the associated discrete assignments. | msrc_UNKNOWN | Details |
| write_simulation_params_massflow | 4480 | Simulate Mass Flow Rate | msrc_UNKNOWN | Details | |
| write_simulation_params_temp | 4481 | Simulate Temperature | msrc_UNKNOWN | Details | |
| write_simulation_params_Density | 4482 | Simulate Density | msrc_UNKNOWN | Details | |
| meth_meter_verification | 4490 | Meter Verification | Starts meter verification and shows the result PASS or FAIL. This procedure takes upto 4 minutes. | msrc_UNKNOWN | Details |
| reset_ed_net_mass_total | 443A | Reset Total | Resets internal totalizers ED Net Mass Total. | msrc_UNKNOWN | Details |
| reset_ed_net_vol_total | 443B | Reset Total | Resets internal totalizers for ED Net Volume Total. | msrc_UNKNOWN | Details |
| reset_gas_std_vol_total | 443C | Reset Total | Resets internal totalizers for Gas Standard Volume Total. | msrc_UNKNOWN | Details |
| reset_api_ref_vol_total | 4438 | Reset Total | Resets internal totalizers for API Reference (Standard) Volume Total | msrc_UNKNOWN | Details |
| reset_ed_ref_corr_vol_total | 4439 | Reset Total | Resets internal totalizers for ED Reference (Corrected) Volume Total. | msrc_UNKNOWN | Details |
| pc1_stat | 44AE | Status | When set, indicates that the Discrete Event has reached its programmed trigger point. | msrc_UNKNOWN | Details |
| pc2_stat | 44AF | Status | When set, indicates that the Discrete Event has reached its programmed trigger point. | msrc_UNKNOWN | Details |
| pc3_stat | 44B0 | Status | When set, indicates that the Discrete Event has reached its programmed trigger point. | msrc_UNKNOWN | Details |
| pc4_stat | 44B1 | Status | When set, indicates that the Discrete Event has reached its programmed trigger point. | msrc_UNKNOWN | Details |
| pc5_stat | 44B2 | Status | When set, indicates that the Discrete Event has reached its programmed trigger point. | msrc_UNKNOWN | Details |
| convert_To_Percent | 4589 | msrc_UNKNOWN | Details | ||
| convert_From_Percent | 458A | msrc_UNKNOWN | Details | ||
| display_DD_build_number | 486D | HART DD Information | msrc_UNKNOWN | Details | |
| method_primary_purpose_variable_small_screen | 4F42 | Primary Purpose Variables | msrc_UNKNOWN | Details | |
| method_primary_purpose_variable_gsv_small_screen | 4F43 | Primary Purpose Variables | msrc_UNKNOWN | Details | |
| method_refresh_alerts_small_screen | 4EA0 | Refresh Alerts | msrc_UNKNOWN | Details | |
| method_device_status_small_screen | 4E9B | Device Status: Good | msrc_UNKNOWN | Details | |
| meth_burst_mode_small_screen | 4EA1 | msrc_UNKNOWN | Details | ||
| method_variable_summary_small_screen | 4EF4 | Variable Summary | msrc_UNKNOWN | Details | |
| method_variable_summary_gsv_small_screen | 4EF5 | Variable Summary | msrc_UNKNOWN | Details | |
| method_variable_summary_PM_small_screen | 4EF6 | Variable Summary | msrc_UNKNOWN | Details | |
| method_variable_summary_CM_small_screen | 4EF7 | Variable Summary | msrc_UNKNOWN | Details | |
| write_simulation_params_massflow_small_screen | 4F15 | Simulate Mass Flow Rate | msrc_UNKNOWN | Details | |
| write_simulation_params_temp_small_screen | 4F17 | Simulate Temperature | msrc_UNKNOWN | Details | |
| write_simulation_params_Density_small_screen | 4F16 | Simulate Density | msrc_UNKNOWN | Details | |
| perform_ack_all | 48A7 | Acknowledge All Alerts | msrc_UNKNOWN | Details | |
| set_totalizer_reset_option | 48A8 | Set Totalizer Reset Option | msrc_UNKNOWN | Details | |
| reset_config_changed_flag | 48A9 | Reset Configuration Changed Flag | msrc_UNKNOWN | Details | |
| perform_factory_zero | 484C | Restore Factory Zero | msrc_UNKNOWN | Details | |
| method_special_units | 48AA | Special Units | msrc_UNKNOWN | Details | |
| method_external_compensation | 48AD | External Pressure/Temperature | msrc_UNKNOWN | Details | |
| method_GSV_setup | 48AF | Gas Standard Volume | msrc_UNKNOWN | Details | |
| method_display_variables | 48B0 | Display Variables | msrc_UNKNOWN | Details | |
| method_display_precision | 48B2 | Decimal Places | msrc_UNKNOWN | Details | |
| meth_setup_channels | 48B4 | Channels | msrc_UNKNOWN | Details | |
| meth_setup_fo_output | 48B8 | Frequency Output | msrc_UNKNOWN | Details | |
| meth_setup_do_output | 48BC | Discrete Output | msrc_UNKNOWN | Details | |
| meth_map_variables | 48BE | Variable Mapping | msrc_UNKNOWN | Details | |
| set_FO_scaling | 4881 | Set Frequency Output Scaling | msrc_UNKNOWN | Details | |
| method_setup_burst | 4702 | Set Up Burst Mode | msrc_UNKNOWN | Details | |
| meth_characterize_sensor | 48C1 | Sensor | msrc_UNKNOWN | Details | |
| meth_setup_mA_output_1 | 48C4 | Set Up mA Output 1 | msrc_UNKNOWN | Details | |
| meth_setup_mA_output_2 | 48C9 | Set Up mA Output 2 | msrc_UNKNOWN | Details | |
| meth_setup_mA_output | 4C40 | mA Output | msrc_UNKNOWN | Details | |
| meth_configure_i_o | 48CE | Inputs/Outputs | msrc_UNKNOWN | Details | |
| write_alarm_severity_meth_a003 | 48CF | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a005 | 48D0 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a006 | 48D1 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a008 | 48D2 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a009 | 48D3 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a011 | 48D4 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a012 | 48D5 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a013 | 48D6 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a016 | 48D7 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a017 | 48D8 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a018 | 48D9 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a020 | 48DA | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a033 | 48DB | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a034 | 48DC | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a035 | 48DD | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a100 | 48DE | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a101 | 48DF | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a102 | 48E0 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a103 | 48E1 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a104 | 48E2 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a105 | 48E3 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a106 | 48E4 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a107 | 48E5 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a108 | 48E6 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a109 | 48E7 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a110 | 48E8 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a111 | 48E9 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a113 | 48EA | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a114 | 48EB | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a115 | 48EC | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a116 | 48ED | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a117 | 48EE | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a118 | 48EF | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a119 | 48F0 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a121 | 48F1 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a131 | 48F2 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a132 | 48F3 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| method_alert_a001 | 4BC0 | A001: EEPROM Error (Core Processor) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a001 | 4C41 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a002 | 4BC1 | A002: RAM Error (Core Processor) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a002 | 4C42 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a003_800 | 4BC2 | A003: No Sensor Response | msrc_UNKNOWN | Details | |
| method_alert_a003_700 | 4BC3 | A003: No Sensor Response | msrc_UNKNOWN | Details | |
| method_add_info_alert_a003 | 47A5 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a004 | 47A6 | A004: Temperature Overrange | msrc_UNKNOWN | Details | |
| method_add_info_alert_a004 | 47A7 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a005 | 47A8 | A005: Mass Flow Rate Overrange | msrc_UNKNOWN | Details | |
| method_add_info_alert_a005 | 47A9 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_Curved_tube_a006 | 47AA | A006: Characterization Required | msrc_UNKNOWN | Details | |
| method_add_info_alert_Curved_tube_a006 | 47AB | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_T_series_a006 | 47AC | A006: Characterization Required | msrc_UNKNOWN | Details | |
| method_add_info_alert_T_series_a006 | 47AD | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a008 | 47AE | A008: Density Overrange | msrc_UNKNOWN | Details | |
| method_add_info_alert_a008 | 47AF | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a009 | 47B0 | A009: Transmitter Initializing/Warming Up | msrc_UNKNOWN | Details | |
| method_alert_a009_700 | 4BCC | A009: Transmitter Initializing/Warming Up | msrc_UNKNOWN | Details | |
| method_add_info_alert_a009 | 47B1 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a010 | 47B2 | A010: Calibration Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a010 | 47B3 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a011 | 47B4 | A011: Zero Calibration Failed: Low | msrc_UNKNOWN | Details | |
| method_add_info_alert_a011 | 47B5 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a012 | 47B6 | A012: Zero Calibration Failed: High | msrc_UNKNOWN | Details | |
| method_add_info_alert_a012 | 47B7 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a013 | 47B8 | A013: Zero Calibration Failed: Unstable | msrc_UNKNOWN | Details | |
| method_add_info_alert_a013 | 47B9 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a014 | 47BA | A014: Transmitter Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a014 | 47BB | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a016 | 47BC | A016: Sensor RTD Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a016 | 47BD | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a017 | 47BE | A017: T-Series RTD Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a017 | 47BF | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a018 | 47C0 | A018: EEPROM Error (Transmitter) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a018 | 47C1 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a019 | 47C2 | A019: RAM Error (Transmitter) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a019 | 47C3 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_Curved_tube_a020 | 47C4 | A020: No Flow Calibration Value | msrc_UNKNOWN | Details | |
| method_add_info_alert_Curved_tube_a020 | 47C5 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_T_series_a020 | 47C6 | A020: No Flow Calibration Value | msrc_UNKNOWN | Details | |
| method_add_info_alert_T_series_a020 | 47C7 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a021 | 47C8 | A021: No K1 Value | msrc_UNKNOWN | Details | |
| method_add_info_alert_a021 | 47C9 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a022 | 47CA | A022: Configuration Database Corrupt (Core Processor) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a022 | 47CB | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a023 | 47CC | A023: Internal Totals Corrupt (Core Processor) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a023 | 47CD | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a024 | 47CE | A024: Program Corrupt (Core Processor) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a024 | 47CF | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a025 | 47D0 | A025: Boot Sector Fault (Core Processor) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a025 | 47D1 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a026 | 47D2 | A026: Sensor/Transmitter Communications Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a026 | 47D3 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a027 | 47D4 | A027: Security Breach | msrc_UNKNOWN | Details | |
| method_add_info_alert_a027 | 47D5 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a028 | 47D6 | A028: Core Processor Write Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a028 | 47D7 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a029 | 4BD5 | A029: PIC/Daughterboard Communication Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a029 | 4C43 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a030 | 4BD6 | A030: Incorrect Board Type | msrc_UNKNOWN | Details | |
| method_add_info_alert_a030 | 4C44 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a031 | 47D8 | A031: Low Power | msrc_UNKNOWN | Details | |
| method_add_info_alert_a031 | 47D9 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a032 | 47DA | A032: Meter Verification in Progress: Outputs to Fault | msrc_UNKNOWN | Details | |
| method_alert_a032_online | 47DB | A032: Outputs Fixed During Meter Verification | msrc_UNKNOWN | Details | |
| method_add_info_alert_a032 | 47DC | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a033 | 47DD | A033: No Right/Left Pickoff Signal | msrc_UNKNOWN | Details | |
| method_add_info_alert_a033 | 47DE | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a034 | 47DF | A034: Meter Verification Failed | msrc_UNKNOWN | Details | |
| method_add_info_alert_a034 | 47E0 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a035 | 47E1 | A035: Meter Verification Aborted | msrc_UNKNOWN | Details | |
| method_add_info_alert_a035 | 47E2 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a100 | 47E3 | A100: mA Output Saturated | msrc_UNKNOWN | Details | |
| method_add_info_alert_a100 | 47E4 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a101 | 47E5 | A101: mA Output Fixed | msrc_UNKNOWN | Details | |
| method_add_info_alert_a101 | 47E6 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a102 | 47E7 | A102: Drive Overrange | msrc_UNKNOWN | Details | |
| method_add_info_alert_a102 | 47E8 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a103 | 47E9 | A103: Data Loss Possible (Totals and Inventories) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a103 | 47EA | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a104 | 47EB | A104: Calibration In Progress | msrc_UNKNOWN | Details | |
| method_add_info_alert_a104 | 47EC | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a105 | 47ED | A105: Slug Flow | msrc_UNKNOWN | Details | |
| method_add_info_alert_a105 | 47EE | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a106 | 47EF | A106: Burst Mode Enabled | msrc_UNKNOWN | Details | |
| method_add_info_alert_a106 | 47F0 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a107 | 47F1 | A107: Power Reset Occurred | msrc_UNKNOWN | Details | |
| method_add_info_alert_a107 | 47F2 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a108 | 47F3 | A108: Single-Setpoint Event 1 ON | msrc_UNKNOWN | Details | |
| method_add_info_alert_a108 | 47F4 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a109 | 47F5 | A109: Single-Setpoint Event 2 ON | msrc_UNKNOWN | Details | |
| method_add_info_alert_a109 | 47F6 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a110 | 47F7 | A110: Frequency Output Saturated | msrc_UNKNOWN | Details | |
| method_add_info_alert_a110 | 47F8 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a111 | 47F9 | A111: Frequency Output Fixed | msrc_UNKNOWN | Details | |
| method_add_info_alert_a111 | 47FA | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a113 | 47FB | A113: mA Output 2 Saturated | msrc_UNKNOWN | Details | |
| method_add_info_alert_a113 | 47FC | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a114 | 47FD | A114: mA Output 2 Fixed | msrc_UNKNOWN | Details | |
| method_add_info_alert_a114 | 47FE | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a115 | 47FF | A115: No External Input or Polled Data | msrc_UNKNOWN | Details | |
| method_add_info_alert_a115 | 4800 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a116 | 4801 | A116: Temperature Overrange (Petroleum Measurement) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a116 | 4802 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a117 | 4803 | A117: Density Overrange (Petroleum Measurement) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a117 | 4804 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a118 | 4805 | A118: Discrete Output 1 Fixed | msrc_UNKNOWN | Details | |
| method_add_info_alert_a118 | 4806 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a119 | 4807 | A119: Discrete Output 2 Fixed | msrc_UNKNOWN | Details | |
| method_add_info_alert_a119 | 4808 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a120 | 4809 | A120: Curve Fit Failure (Concentration Measurement) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a120 | 480A | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a121 | 480B | A121: Extrapolation Alert (Concentration Measurement) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a121 | 480C | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a131 | 480D | A131: Meter Verification in Progress: Outputs to Last Measured Value | msrc_UNKNOWN | Details | |
| method_alert_a131_online | 480E | A131: Meter Verification in Progress | msrc_UNKNOWN | Details | |
| method_add_info_alert_a131 | 480F | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a132 | 4810 | A132: Sensor Simulation Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_a132 | 4811 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_discrete_event_1_active | 4812 | Discrete Event 1 Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_event_1_active | 4813 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_discrete_event_2_active | 4814 | Discrete Event 2 Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_event_2_active | 4815 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_discrete_event_3_active | 4816 | Discrete Event 3 Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_event_3_active | 4817 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_discrete_event_4_active | 4818 | Discrete Event 4 Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_event_4_active | 4819 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_discrete_event_5_active | 481A | Discrete Event 5 Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_event_5_active | 481B | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_discrete_input_active | 481C | Discrete Input Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_input_active | 481D | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_pv_out_of_limits | 481E | Primary Variable Out of Limits | msrc_UNKNOWN | Details | |
| method_add_info_alert_pv_out_of_limits | 481F | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_non_pv_out_of_limits | 4820 | Non-Primary Variable Out of Limits | msrc_UNKNOWN | Details | |
| method_add_info_alert_non_pv_out_of_limits | 4821 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_pv_mA_output_saturated | 4822 | Primary Variable mA Output Saturated | msrc_UNKNOWN | Details | |
| method_add_info_alert_pv_mA_output_saturated | 4823 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_pv_mA_output_fixed | 4824 | Primary Variable mA Output Fixed | msrc_UNKNOWN | Details | |
| method_add_info_alert_pv_mA_output_fixed | 4825 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_cold_start | 4826 | Cold Start | msrc_UNKNOWN | Details | |
| method_add_info_alert_cold_start | 4827 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_config_changed | 48F4 | Configuration Changed | msrc_UNKNOWN | Details | |
| method_add_info_alert_config_changed | 48F5 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_device_malfunction | 4828 | Field Device Malfunction | msrc_UNKNOWN | Details | |
| method_add_info_alert_device_malfunction | 4829 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| meth_meter_verification_online | 4882 | Start | Starts meter verification and shows the result PASS or FAIL. This procedure takes upto 4 minutes. | msrc_UNKNOWN | Details |
| abort_meter_verification | 4491 | msrc_UNKNOWN | Details | ||
| meth_meter_verification_upload_results | 48F6 | msrc_UNKNOWN | Details | ||
| method_setup_schedule | 48F7 | Setup | msrc_UNKNOWN | Details | |
| method_setup_event_trigger | 48F9 | Setup Event Trigger | msrc_UNKNOWN | Details | |
| method_show_results_table_small_screen | 4F1D | Show Results Table | msrc_UNKNOWN | Details | |
| method_turn_off_schedule_small_screen | 4F1E | Turn Off Schedule | msrc_UNKNOWN | Details | |
| method_upload_mv_results | 48FB | Upload Results Data from Device | msrc_UNKNOWN | Details | |
| meth_show_last_20_results | 4C45 | Show Last 20 Results | msrc_UNKNOWN | Details | |
| meth_ld_optimization | 4B83 | LD Optimization | msrc_UNKNOWN | Details | |
| method_enter_matrix | 4C46 | Enter Matrix | msrc_UNKNOWN | Details | |
| meth_reset_matrix_data | 4C48 | Reset Matrix Data | msrc_UNKNOWN | Details | |
| meth_reset_matrix_data_small_screen | 4F26 | Reset Matrix Data | msrc_UNKNOWN | Details | |
| meth_communication | 4C49 | Communications | msrc_UNKNOWN | Details | |
| meth_enable_disable_write_protect | 4C4B | Write Protect | msrc_UNKNOWN | Details | |
| meth_enable_disable_write_protect_small_screen | 4F14 | Write Protect | msrc_UNKNOWN | Details | |
| write_alarm_severity_meth_new | 4B35 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| meth_view_alert_severity_new | 4B36 | View Alert Severity | msrc_UNKNOWN | Details | |
| method_upload_mv_results_small_screen | 4F1C | Upload Results Data from Device | msrc_UNKNOWN | Details | |
| method_squawk_flash_lcd | 4E18 | Locate Device | msrc_UNKNOWN | Details | |
| method_squawk_flash_lcd_small_screen | 4F10 | Locate Device | msrc_UNKNOWN | Details | |
| method_advance_burst_option | 4CD5 | Advanced HART Configuration | msrc_UNKNOWN | Details | |
| meth_lock_unlock_device | 4D10 | Lock/Unlock Device | Lock/Unlock Device- Places the device in either a locked or unlocked position. | msrc_UNKNOWN | Details |
| meth_device_reset | 4F01 | Device Reset | Device Reset- Commands the electronics to perform a reset. This is equivalent to cycling the power off and then back on to the field device. | msrc_UNKNOWN | Details |
| restore_factory_configure | 4F02 | Restore Factory Configuration | msrc_UNKNOWN | Details | |
| method_config_matrix | 4F4B | Matrix Configuration | msrc_UNKNOWN | Details | |
| method_trim_cons_measure | 4F4D | Trim Concentration Measurement Process Variables | msrc_UNKNOWN | Details | |
| warning_message | 1017 | Set loop to manual | msrc_UNKNOWN | Details | |
| transmitter_dac_trim | 1024 | Scaled AO1 trim | Digital to Analog Trim- Allows the calibration of a selected Analog Output with an external reference at the operating endpoints of the Analog Output | msrc_UNKNOWN | Details |
| return_to_normal | 1016 | Aborting return to normal | msrc_UNKNOWN | Details | |
| leave_fixed_current_mode | 1003 | Leaving fixed crnt mode | Leaving Fixed Current Mode- Takes the Analog Output out of a mode where the output was a constant value, and returns the output to a mode where the output tracks the input | msrc_UNKNOWN | Details |
| Name | ID | Label | Description | Type | Source |