方法列表 - Micro Motion - 2400S Mass flo-0034

Loading…

名称	ID	标签	描述	类型	源代码
sensor_setup_meth	42D8	Change Sensor Type	This selection must be made to enable calibration parameters to be visible for the selected sensor type.	msrc_UNKNOWN	详细信息
set_chana	42D9	Channel A Setup	This function will allow the user to setup channel A to act as a milliamp output. The appropriate configuration parameters will be displayed to the user once this selection has been made.	msrc_UNKNOWN	详细信息
set_chanb	42DA	Channel B Setup	This function will allow the user to setup channel B to act as a frequency output, discrete input or a discrete output. The appropriate configuration parameters will be displayed to the user once this selection has been made.	msrc_UNKNOWN	详细信息
mmi_auto_zero	42DB	Perform Auto Zero	Please refer to manual for complete calibration instructions.	msrc_UNKNOWN	详细信息
dencal_a	42DD	First Point Calibration	Please refer to manual for complete calibration instructions.	msrc_UNKNOWN	详细信息
dencal_b	42DF	Second Point Calibration	Please refer to manual for complete calibration instructions.	msrc_UNKNOWN	详细信息
dencal_c	42E0	Third Point Calibration	Please refer to manual for complete calibration instructions.	msrc_UNKNOWN	详细信息
dencal_d	42E1	Fourth Point Calibration	Please refer to manual for complete calibration instructions.	msrc_UNKNOWN	详细信息
dencal_fd	42E2	Flowing Density Calibration	Please refer to manual for complete calibration instructions.	msrc_UNKNOWN	详细信息
temp_offset_cal	42E3	Perform Cal	Please refer to manual for complete calibration instructions.	msrc_UNKNOWN	详细信息
temp_slope_cal	42E4	Perform Cal	Please refer to manual for complete calibration instructions.	msrc_UNKNOWN	详细信息
fix_do_1	42E5	Discrete Output Test	Outputs a user-programmed discrete state to the discrete output.	msrc_UNKNOWN	详细信息
leave_fixed_do1_mode	42E6		Exits fixed mode and returns the discrete output to its active state.	msrc_UNKNOWN	详细信息
fix_frequency	42E7	Frequency Output Test	Outputs a user-programmed frequency to the frequency output.	msrc_UNKNOWN	详细信息
fix_ao_1	42E9	mA Output Loop Test	固定模拟量输出——允许用户将选择的模拟量输出手动调节至选择的常数输出值。	msrc_UNKNOWN	详细信息
analog_1_trim	42EB	毫安输出调整	数字到模拟修正——允许对选择的模拟量输出进行标定，在模拟量输出的操作端点有外部参考。	msrc_UNKNOWN	详细信息
self_test	42EC	自测试	Instructs transmitter to perform internal self test.	msrc_UNKNOWN	详细信息
start_total	42ED	Start	Enables the internal totalizers to begin counting.	msrc_UNKNOWN	详细信息
stop_total	42EE	Stop	Prevents the internal totalizers from counting.	msrc_UNKNOWN	详细信息
reset_all_total	42EF	Reset All	复位所有累加器	msrc_UNKNOWN	详细信息
reset_mass_total	42F0	Reset Total	复位质量流量累加器	msrc_UNKNOWN	详细信息
reset_vol_total	42F1	Reset Total	复位体积流量累加器	msrc_UNKNOWN	详细信息
reset_gas_std_vol_total	42F2	Reset Total	Resets internal totalizers.	msrc_UNKNOWN	详细信息
alarm1_stat	42F3	Status Event1	When set, indicates that Event 1 has reached its programmed setpoint.	msrc_UNKNOWN	详细信息
alarm2_stat	42F4	Status Event2	When set, indicates that Event 2 has reached its programmed setpoint.	msrc_UNKNOWN	详细信息
do1_stat	42F5	Status DO1	When set, indicates that DO 1 has been triggered.	msrc_UNKNOWN	详细信息
view_xmtr_status	42F6	Alerts	Reports any currently active device status information.	msrc_UNKNOWN	详细信息
abort_auto_zero	42DC		Aborts Auto Zero operation and continues to use previous zero offset value.	msrc_UNKNOWN	详细信息
leave_fixed_freq_mode	42E8		Exits fixed mode and returns the frequency output to its active state.	msrc_UNKNOWN	详细信息
mmi_leave_analog_fixed_current_mode1	42EA	退出固定电流模式	退出固定电流模式——使选择的模拟量输出退出输出为常数值的模式，使输出返回输出跟踪输入的模式。	msrc_UNKNOWN	详细信息
abort_send	42DE			msrc_UNKNOWN	详细信息
must_send_fault_level	40DF			msrc_UNKNOWN	详细信息
must_send_pv	4001			msrc_UNKNOWN	详细信息
must_send_sv	4003			msrc_UNKNOWN	详细信息
must_send_tv	4005			msrc_UNKNOWN	详细信息
must_send_event_var	42F7			msrc_UNKNOWN	详细信息
must_send_units	4009			msrc_UNKNOWN	详细信息
must_send_scaling	40C4			msrc_UNKNOWN	详细信息
write_alarm_severity_meth	42F8	Change Alert Severity	Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102.	msrc_UNKNOWN	详细信息
read_alarm_severity_meth	42F9	Read Severity	Reports the severity level of the selected alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102.	msrc_UNKNOWN	详细信息
review_alarm_severity_meth	42FA	Review Severity (All)	Reports the severity level of all the alarms.	msrc_UNKNOWN	详细信息
write_discrete_assignment_meth_smv	4B5C	Assign Discrete Action	Assigns a discrete to an action. Select none for no discrete assignment.	msrc_UNKNOWN	详细信息
write_discrete_assignment_meth	42FB	Assign Discrete Action	Assigns a discrete to an action. Select none for no discrete assignment.	msrc_UNKNOWN	详细信息
read_discrete_assignment_meth	42FC	Read Discrete Action Assignment	For a selected discrete action, reports the associated discrete assignment.	msrc_UNKNOWN	详细信息
read_discrete_assignment_meth_smv	4B5D	Read Discrete Action Assignment	For a selected discrete action, reports the associated discrete assignment.	msrc_UNKNOWN	详细信息
review_discrete_assignment_meth_smv	4B5E	Review All Discrete Actions	Cycles through the discrete actions and reports the associated discrete assignments.	msrc_UNKNOWN	详细信息
review_discrete_assignment_meth	42FD	Review All Discrete Actions	Cycles through the discrete actions and reports the associated discrete assignments.	msrc_UNKNOWN	详细信息
select_acknowledge_alarm	42FE	Acknowledge the selected alarm		msrc_UNKNOWN	详细信息
perform_varDiagnostic_Action_Code	42FF	Perform Diagnostic Action		msrc_UNKNOWN	详细信息
perform_ack_all	44F6	Acknowledge All Alerts		msrc_UNKNOWN	详细信息
read_modbus_register	4300	读取 Modbus 数据		msrc_UNKNOWN	详细信息
write_modbus_register	4301	写入 Modbus 数据		msrc_UNKNOWN	详细信息
write_simulation_params_massflow	4302	Simulate Mass Flow Rate		msrc_UNKNOWN	详细信息
write_simulation_params_temp	4303	Simulate Temperature		msrc_UNKNOWN	详细信息
write_simulation_params_Density	4304	Simulate Density		msrc_UNKNOWN	详细信息
write_simulation_params_massflow_hh	4B5F	Simulate Mass Flow Rate		msrc_UNKNOWN	详细信息
write_simulation_params_temp_hh	4B60	Simulate Temperature		msrc_UNKNOWN	详细信息
write_simulation_params_Density_hh	4B61	Simulate Density		msrc_UNKNOWN	详细信息
read_di_1_state	4402	Read Discrete In	Reads the state of the Discrete Input.	msrc_UNKNOWN	详细信息
refresh_alarm_history	4403	Refresh Alarm Event Log	Uploads the 50 alarm history records from the device. This method takes approximately 30 sec to run.	msrc_UNKNOWN	详细信息
set_FO_Fault	449B	Set Fault Parameters		msrc_UNKNOWN	详细信息
meth_meter_verification	44E6	仪表校验	启动仪表校验并显示结果为通过 (PASS) 或失败 (FAIL) 。此步骤需要 4 分钟。	msrc_UNKNOWN	详细信息
method_view_test_results	4B62	最新测试结果		msrc_UNKNOWN	详细信息
set_FO_scaling	44EF	Set Frequency Output Scaling		msrc_UNKNOWN	详细信息
reset_config_changed_flag	462A	Reset Configuration Changed Flag		msrc_UNKNOWN	详细信息
display_DD_build_number	4716	HART DD Information		msrc_UNKNOWN	详细信息
method_primary_purpose_variable_375	4718	Primary Purpose Variables		msrc_UNKNOWN	详细信息
method_primary_purpose_variable_gsv_hh	4B64	Primary Purpose Variables		msrc_UNKNOWN	详细信息
method_variable_summary_hh	4B65	Variable Summary		msrc_UNKNOWN	详细信息
method_variable_summary_gsv_hh	4B66	Variable Summary		msrc_UNKNOWN	详细信息
method_device_status_hh	4B67	Device Status: Good		msrc_UNKNOWN	详细信息
meth_burst_mode_hh	4B68			msrc_UNKNOWN	详细信息
method_refresh_alerts_hh	4B69	Refresh Alerts		msrc_UNKNOWN	详细信息
method_setup_burst	46E8	Set Up Burst Mode		msrc_UNKNOWN	详细信息
meth_characterize_sensor	471F	Sensor	按传感器特征配置变送器。	msrc_UNKNOWN	详细信息
meth_configure_i_o	4722	Inputs/Outputs	组态通道、输入、输出、映射变量和通讯设置。	msrc_UNKNOWN	详细信息
method_special_units	472F	特殊单位	组态将现有测量单位转换成不同单位所需的参数。	msrc_UNKNOWN	详细信息
method_external_compensation	4731	外部压力/温度	组态变送器以接受来自轮询的压力和/或温度设备的外部输入。	msrc_UNKNOWN	详细信息
method_GSV_setup	4732	Gas Standard Volume	根据气体标准体积测量组态变送器。	msrc_UNKNOWN	详细信息
method_display_variables	4735	Display Variables		msrc_UNKNOWN	详细信息
method_display_precision	4736	Decimal Places		msrc_UNKNOWN	详细信息
meth_setup_channels	4738	Channels		msrc_UNKNOWN	详细信息
meth_setup_mA_output	4739	mA Output		msrc_UNKNOWN	详细信息
meth_setup_fo_output	473A	Frequency Output		msrc_UNKNOWN	详细信息
meth_setup_do_output	473B	Discrete Output		msrc_UNKNOWN	详细信息
meth_map_variables	473C	Variable Mapping	将变量映射到初级变量 (PV)、二级变量 (SV)、三级变量 (TV)和“四级变量 (QV)。	msrc_UNKNOWN	详细信息
meth_view_alert_severity	473D	View Alert Severity		msrc_UNKNOWN	详细信息
method_alert_a001	473E	A001: EEPROM Error (Core Processor)		msrc_UNKNOWN	详细信息
method_add_info_alert_a001	473F	以上内容没有更多信息		msrc_UNKNOWN	详细信息
method_alert_a002	4740	A002: RAM Error (Core Processor)		msrc_UNKNOWN	详细信息
method_add_info_alert_a002	4741	以上内容没有更多信息		msrc_UNKNOWN	详细信息
method_alert_a003	4742	A003: No Sensor Response		msrc_UNKNOWN	详细信息
method_add_info_alert_a003	4743	以上内容的更多信息		msrc_UNKNOWN	详细信息
method_alert_a004	4744	A004: Temperature Overrange		msrc_UNKNOWN	详细信息
method_add_info_alert_a004	4745	以上内容的更多信息		msrc_UNKNOWN	详细信息
method_alert_a005	4746	A005：质量流量超限		msrc_UNKNOWN	详细信息
method_add_info_alert_a005	4747	以上内容没有更多信息		msrc_UNKNOWN	详细信息
method_alert_Curved_tube_a006	4748	A006: Characterization Required		msrc_UNKNOWN	详细信息
method_add_info_alert_Curved_tube_a006	4749	以上内容的更多信息		msrc_UNKNOWN	详细信息
method_alert_T_series_a006	474A	A006: Characterization Required		msrc_UNKNOWN	详细信息
method_add_info_alert_T_series_a006	474B	以上内容的更多信息		msrc_UNKNOWN	详细信息
method_alert_a008	474C	A008: Density Overrange		msrc_UNKNOWN	详细信息
method_add_info_alert_a008	474D	以上内容没有更多信息		msrc_UNKNOWN	详细信息
method_alert_a009	474E	A009: Transmitter Initializing/Warming Up		msrc_UNKNOWN	详细信息
method_add_info_alert_a009	474F	以上内容没有更多信息		msrc_UNKNOWN	详细信息
method_alert_a010	4750	A010: Calibration Failure		msrc_UNKNOWN	详细信息
method_add_info_alert_a010	4751	以上内容没有更多信息		msrc_UNKNOWN	详细信息
method_alert_a011	4752	A011: Zero Calibration Failed: Low		msrc_UNKNOWN	详细信息
method_add_info_alert_a011	4753	以上内容没有更多信息		msrc_UNKNOWN	详细信息
method_alert_a012	4754	A012: Zero Calibration Failed: High		msrc_UNKNOWN	详细信息
method_add_info_alert_a012	4755	以上内容没有更多信息		msrc_UNKNOWN	详细信息
method_alert_a013	4756	A013: Zero Calibration Failed: Unstable		msrc_UNKNOWN	详细信息
method_add_info_alert_a013	4757	以上内容没有更多信息		msrc_UNKNOWN	详细信息
method_alert_a014	4758	A014: Transmitter Failure		msrc_UNKNOWN	详细信息
method_add_info_alert_a014	4759	以上内容没有更多信息		msrc_UNKNOWN	详细信息
method_alert_a016	475A	A016: Sensor RTD Failure		msrc_UNKNOWN	详细信息
method_add_info_alert_a016	475B	以上内容的更多信息		msrc_UNKNOWN	详细信息
method_alert_a017	475C	A017: T-Series RTD Failure		msrc_UNKNOWN	详细信息
method_add_info_alert_a017	475D	以上内容没有更多信息		msrc_UNKNOWN	详细信息
method_alert_Curved_tube_a020	475E	A020: No Flow Calibration Value		msrc_UNKNOWN	详细信息
method_add_info_alert_Curved_tube_a020	475F	以上内容的更多信息		msrc_UNKNOWN	详细信息
method_alert_T_series_a020	4760	A020: No Flow Calibration Value		msrc_UNKNOWN	详细信息
method_add_info_alert_T_series_a020	4761	以上内容的更多信息		msrc_UNKNOWN	详细信息
method_alert_a021	4762	A021: No K1 Value		msrc_UNKNOWN	详细信息
method_add_info_alert_a021	4763	以上内容的更多信息		msrc_UNKNOWN	详细信息
method_alert_a029	4764	A029: PIC/Daughterboard Communication Failure		msrc_UNKNOWN	详细信息
method_add_info_alert_a029	4765	以上内容没有更多信息		msrc_UNKNOWN	详细信息
method_alert_a030	4766	A030: Incorrect Board Type		msrc_UNKNOWN	详细信息
method_add_info_alert_a030	4767	以上内容没有更多信息		msrc_UNKNOWN	详细信息
method_alert_a031	4768	A031: Low Power		msrc_UNKNOWN	详细信息
method_add_info_alert_a031	4769	以上内容没有更多信息		msrc_UNKNOWN	详细信息
method_alert_a032	476A	A032：智能仪表自校验进行中：输出固定		msrc_UNKNOWN	详细信息
method_add_info_alert_a032	476B	以上内容没有更多信息		msrc_UNKNOWN	详细信息
method_alert_a033	476C	A033: No Right/Left Pickoff Signal		msrc_UNKNOWN	详细信息
method_add_info_alert_a033	476D	以上内容没有更多信息		msrc_UNKNOWN	详细信息
method_alert_a100	476E	A100: mA Output Saturated		msrc_UNKNOWN	详细信息
method_add_info_alert_a100	476F	以上内容的更多信息		msrc_UNKNOWN	详细信息
method_alert_a101	4770	A101: mA Output Fixed		msrc_UNKNOWN	详细信息
method_add_info_alert_a101	4771	以上内容的更多信息		msrc_UNKNOWN	详细信息
method_alert_a102	4772	A102: Drive Overrange		msrc_UNKNOWN	详细信息
method_add_info_alert_a102	4773	以上内容没有更多信息		msrc_UNKNOWN	详细信息
method_alert_a104	4774	A104：正在进行校准		msrc_UNKNOWN	详细信息
method_add_info_alert_a104	4775	以上内容没有更多信息		msrc_UNKNOWN	详细信息
method_alert_a105	4776	A105：团状流		msrc_UNKNOWN	详细信息
method_add_info_alert_a105	4777	以上内容的更多信息		msrc_UNKNOWN	详细信息
method_alert_a106	4778	A106: Burst Mode Enabled		msrc_UNKNOWN	详细信息
method_add_info_alert_a106	4779	以上内容没有更多信息		msrc_UNKNOWN	详细信息
method_alert_a107	477A	A107: Power Reset Occurred		msrc_UNKNOWN	详细信息
method_add_info_alert_a107	477B	以上内容没有更多信息		msrc_UNKNOWN	详细信息
method_alert_a110	477C	A110: Frequency Output Saturated		msrc_UNKNOWN	详细信息
method_add_info_alert_a110	477D	以上内容的更多信息		msrc_UNKNOWN	详细信息
method_alert_a111	477E	A111: Frequency Output Fixed		msrc_UNKNOWN	详细信息
method_add_info_alert_a111	477F	以上内容的更多信息		msrc_UNKNOWN	详细信息
method_alert_a113	4780	A113: mA Output 2 Saturated		msrc_UNKNOWN	详细信息
method_add_info_alert_a113	4781	以上内容的更多信息		msrc_UNKNOWN	详细信息
method_alert_a114	4782	A114: mA Output 2 Fixed		msrc_UNKNOWN	详细信息
method_add_info_alert_a114	4783	以上内容的更多信息		msrc_UNKNOWN	详细信息
method_alert_a115	4784	A115: No External Input or Polled Data		msrc_UNKNOWN	详细信息
method_add_info_alert_a115	4785	以上内容的更多信息		msrc_UNKNOWN	详细信息
method_alert_a131	4786	A131：仪表校验正在进行		msrc_UNKNOWN	详细信息
method_add_info_alert_a131	4787	以上内容没有更多信息		msrc_UNKNOWN	详细信息
method_alert_a132	4788	A132: Sensor Simulation Active		msrc_UNKNOWN	详细信息
method_add_info_alert_a132	4789	以上内容没有更多信息		msrc_UNKNOWN	详细信息
method_alert_a133	478A	A133: EEPROM Error (Display)		msrc_UNKNOWN	详细信息
method_add_info_alert_a133	478B	以上内容没有更多信息		msrc_UNKNOWN	详细信息
method_alert_discrete_event_1_active	478C	Discrete Event 1 Active		msrc_UNKNOWN	详细信息
method_add_info_alert_discrete_event_1_active	478D	以上内容的更多信息		msrc_UNKNOWN	详细信息
method_alert_discrete_event_2_active	478E	Discrete Event 2 Active		msrc_UNKNOWN	详细信息
method_add_info_alert_discrete_event_2_active	478F	以上内容的更多信息		msrc_UNKNOWN	详细信息
method_alert_discrete_event_3_active	4790	Discrete Event 3 Active		msrc_UNKNOWN	详细信息
method_add_info_alert_discrete_event_3_active	4791	以上内容的更多信息		msrc_UNKNOWN	详细信息
method_alert_discrete_event_4_active	4792	Discrete Event 4 Active		msrc_UNKNOWN	详细信息
method_add_info_alert_discrete_event_4_active	4793	以上内容的更多信息		msrc_UNKNOWN	详细信息
method_alert_discrete_event_5_active	4794	Discrete Event 5 Active		msrc_UNKNOWN	详细信息
method_add_info_alert_discrete_event_5_active	4795	以上内容的更多信息		msrc_UNKNOWN	详细信息
method_alert_discrete_input_active	4796	Discrete Input Active		msrc_UNKNOWN	详细信息
method_add_info_alert_discrete_input_active	4797	以上内容的更多信息		msrc_UNKNOWN	详细信息
method_alert_pv_out_of_limits	4798	Primary Variable Out of Limits		msrc_UNKNOWN	详细信息
method_add_info_alert_pv_out_of_limits	4799	以上内容没有更多信息		msrc_UNKNOWN	详细信息
method_alert_non_pv_out_of_limits	479A	Non-Primary Variable Out of Limits		msrc_UNKNOWN	详细信息
method_add_info_alert_non_pv_out_of_limits	479B	以上内容没有更多信息		msrc_UNKNOWN	详细信息
method_alert_pv_mA_output_saturated	479C	Primary Variable mA Output Saturated		msrc_UNKNOWN	详细信息
method_add_info_alert_pv_mA_output_saturated	479D	以上内容没有更多信息		msrc_UNKNOWN	详细信息
method_alert_pv_mA_output_fixed	479E	Primary Variable mA Output Fixed		msrc_UNKNOWN	详细信息
method_add_info_alert_pv_mA_output_fixed	479F	以上内容没有更多信息		msrc_UNKNOWN	详细信息
method_alert_cold_start	47A0	Cold Start		msrc_UNKNOWN	详细信息
method_add_info_alert_cold_start	47A1	以上内容没有更多信息		msrc_UNKNOWN	详细信息
method_alert_config_changed	47A2	Configuration Changed		msrc_UNKNOWN	详细信息
method_add_info_alert_config_changed	47A3	以上内容没有更多信息		msrc_UNKNOWN	详细信息
method_alert_device_malfunction	47A4	Field Device Malfunction		msrc_UNKNOWN	详细信息
method_add_info_alert_device_malfunction	47A5	以上内容没有更多信息		msrc_UNKNOWN	详细信息
write_alarm_severity_meth_a003	462D	Change Alert Severity	Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102.	msrc_UNKNOWN	详细信息
write_alarm_severity_meth_a005	462E	Change Alert Severity	Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102.	msrc_UNKNOWN	详细信息
write_alarm_severity_meth_a006	462F	Change Alert Severity	Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102.	msrc_UNKNOWN	详细信息
write_alarm_severity_meth_a008	4630	Change Alert Severity	Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102.	msrc_UNKNOWN	详细信息
write_alarm_severity_meth_a009	4631	Change Alert Severity	Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102.	msrc_UNKNOWN	详细信息
write_alarm_severity_meth_a011	4632	Change Alert Severity	Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102.	msrc_UNKNOWN	详细信息
write_alarm_severity_meth_a012	4633	Change Alert Severity	Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102.	msrc_UNKNOWN	详细信息
write_alarm_severity_meth_a013	4634	Change Alert Severity	Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102.	msrc_UNKNOWN	详细信息
write_alarm_severity_meth_a016	4635	Change Alert Severity	Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102.	msrc_UNKNOWN	详细信息
write_alarm_severity_meth_a017	4636	Change Alert Severity	Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102.	msrc_UNKNOWN	详细信息
write_alarm_severity_meth_a020	4637	Change Alert Severity	Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102.	msrc_UNKNOWN	详细信息
write_alarm_severity_meth_a033	4638	Change Alert Severity	Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102.	msrc_UNKNOWN	详细信息
write_alarm_severity_meth_a100	4639	Change Alert Severity	Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102.	msrc_UNKNOWN	详细信息
write_alarm_severity_meth_a101	463A	Change Alert Severity	Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102.	msrc_UNKNOWN	详细信息
write_alarm_severity_meth_a102	463B	Change Alert Severity	Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102.	msrc_UNKNOWN	详细信息
write_alarm_severity_meth_a104	463C	Change Alert Severity	Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102.	msrc_UNKNOWN	详细信息
write_alarm_severity_meth_a105	463D	Change Alert Severity	Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102.	msrc_UNKNOWN	详细信息
write_alarm_severity_meth_a106	463E	Change Alert Severity	Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102.	msrc_UNKNOWN	详细信息
write_alarm_severity_meth_a107	463F	Change Alert Severity	Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102.	msrc_UNKNOWN	详细信息
write_alarm_severity_meth_a110	4642	Change Alert Severity	Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102.	msrc_UNKNOWN	详细信息
write_alarm_severity_meth_a111	4643	Change Alert Severity	Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102.	msrc_UNKNOWN	详细信息
write_alarm_severity_meth_a113	47A6	Change Alert Severity	Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102.	msrc_UNKNOWN	详细信息
write_alarm_severity_meth_a114	47A7	Change Alert Severity	Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102.	msrc_UNKNOWN	详细信息
write_alarm_severity_meth_a115	4644	Change Alert Severity	Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102.	msrc_UNKNOWN	详细信息
write_alarm_severity_meth_a131	4646	Change Alert Severity	Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102.	msrc_UNKNOWN	详细信息
write_alarm_severity_meth_a132	4647	Change Alert Severity	Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102.	msrc_UNKNOWN	详细信息
write_alarm_severity_meth_a133	47A8	Change Alert Severity	Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102.	msrc_UNKNOWN	详细信息
perform_factory_zero	4968	Restore Factory Zero		msrc_UNKNOWN	详细信息
meth_meter_verification_online	4969	开始	启动仪表校验并显示结果为通过 (PASS) 或失败 (FAIL) 。此步骤需要 4 分钟。	msrc_UNKNOWN	详细信息
method_turn_off_schedule_invalid_hh	4B6A	关闭计划	关闭智能仪表检定调度程序。	msrc_UNKNOWN	详细信息
abort_meter_verification	44E7			msrc_UNKNOWN	详细信息
meth_meter_verification_upload_results	496B			msrc_UNKNOWN	详细信息
method_setup_schedule	496C	设置		msrc_UNKNOWN	详细信息
method_setup_event_trigger	496E	Setup Event Trigger		msrc_UNKNOWN	详细信息
method_upload_mv_results	4970	Upload Results Data from Device		msrc_UNKNOWN	详细信息
method_show_results_table_hh	4B6B	Show Results Table		msrc_UNKNOWN	详细信息
method_turn_off_schedule_hh	4B6C	关闭计划		msrc_UNKNOWN	详细信息
write_alarm_severity_meth_a034	4973	Change Alert Severity	Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102.	msrc_UNKNOWN	详细信息
write_alarm_severity_meth_a035	4974	Change Alert Severity	Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102.	msrc_UNKNOWN	详细信息
method_alert_a034	4975	A034：仪表校验失败		msrc_UNKNOWN	详细信息
method_add_info_alert_a034	4976	以上内容的更多信息		msrc_UNKNOWN	详细信息
method_alert_a035	4977	A035：仪表校验中止		msrc_UNKNOWN	详细信息
method_add_info_alert_a035	4978	以上内容的更多信息		msrc_UNKNOWN	详细信息
meth_ld_optimization	49FB	LD 优化	根据 LD 优化组态变送器。LD 优化仅用于烃类应用中的大型传感器。	msrc_UNKNOWN	详细信息
meth_communications	49FC	Communications		msrc_UNKNOWN	详细信息
meth_show_last_20_results	49FE	显示最新的 20 个结果		msrc_UNKNOWN	详细信息
convert_To_Percent	49FF			msrc_UNKNOWN	详细信息
convert_From_Percent	4A00			msrc_UNKNOWN	详细信息
method_upload_mv_results_hh	4B6D	Upload Results Data from Device		msrc_UNKNOWN	详细信息
write_alarm_severity_meth_new	4A02	Change Alert Severity	Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102.	msrc_UNKNOWN	详细信息
meth_view_alert_severity_new	4A04	View Alert Severity		msrc_UNKNOWN	详细信息
meth_setup_discrete_input	4AEB	Discrete Input		msrc_UNKNOWN	详细信息
write_discrete_ip_assignment_meth_hh	4B6E	Assignment	Assigns a discrete to an action. Select none for no discrete assignment.	msrc_UNKNOWN	详细信息
meth_device_reset	4B02	设备复位	设备复位——命令电子设备执行复位。该操作相当于将现场设备电源关闭然后再打开。	msrc_UNKNOWN	详细信息
restore_factory_configure	4B03	恢复出厂配置		msrc_UNKNOWN	详细信息
method_alert_a118	4B6F	A：离散输出固定		msrc_UNKNOWN	详细信息
warning_message	1017	设置回路为手动		msrc_UNKNOWN	详细信息
transmitter_dac_trim	1024	D/A修正	数字到模拟修正——允许对选择的模拟量输出进行标定，在模拟量输出的操作端点有外部参考。	msrc_UNKNOWN	详细信息
return_to_normal	1016	中止返回正常		msrc_UNKNOWN	详细信息
leave_fixed_current_mode	1003	退出固定电流模式	退出固定电流模式——使选择的模拟量输出退出输出为常数值的模式，使输出返回输出跟踪输入的模式。	msrc_UNKNOWN	详细信息
名称	ID	标签	描述	类型	源代码