Loading…
Loading…
| Name | ID | Label | Description | Type | Source |
|---|---|---|---|---|---|
| sensor_setup_meth | 42D8 | Change Sensor Type | This selection must be made to enable calibration parameters to be visible for the selected sensor type. | msrc_UNKNOWN | Details |
| set_chana | 42D9 | Channel A Setup | This function will allow the user to setup channel A to act as a milliamp output. The appropriate configuration parameters will be displayed to the user once this selection has been made. | msrc_UNKNOWN | Details |
| set_chanb | 42DA | Channel B Setup | This function will allow the user to setup channel B to act as a frequency output, discrete input or a discrete output. The appropriate configuration parameters will be displayed to the user once this selection has been made. | msrc_UNKNOWN | Details |
| mmi_auto_zero | 42DB | Perform Auto Zero | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| dencal_a | 42DD | First Point Calibration | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| dencal_b | 42DF | Second Point Calibration | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| dencal_c | 42E0 | Third Point Calibration | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| dencal_d | 42E1 | Fourth Point Calibration | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| dencal_fd | 42E2 | Flowing Density Calibration | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| temp_offset_cal | 42E3 | Perform Cal | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| temp_slope_cal | 42E4 | Perform Cal | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| fix_do_1 | 42E5 | Discrete Output Test | Outputs a user-programmed discrete state to the discrete output. | msrc_UNKNOWN | Details |
| leave_fixed_do1_mode | 42E6 | Exits fixed mode and returns the discrete output to its active state. | msrc_UNKNOWN | Details | |
| fix_frequency | 42E7 | Frequency Output Test | Outputs a user-programmed frequency to the frequency output. | msrc_UNKNOWN | Details |
| fix_ao_1 | 42E9 | mA Output Loop Test | 固定ｱﾅﾛｸﾞ出力 - ﾕｰｻﾞｰが選択したｱﾅﾛｸﾞ出力を選択した値で固定出力します。 | msrc_UNKNOWN | Details |
| analog_1_trim | 42EB | mA 出力ﾄﾘﾑ | D/A ﾄﾘﾑ (ﾃﾞｼﾞﾀﾙ/ｱﾅﾛｸﾞ ﾄﾘﾑ) - ｵﾍﾟﾚｰﾃｨﾝｸﾞ ｴﾝﾄﾞ ﾎﾟｲﾝﾄに対するｱﾅﾛｸﾞ出力と外部指示計とのｷｬﾘﾌﾞﾚｰｼｮﾝを行います。 | msrc_UNKNOWN | Details |
| self_test | 42EC | ｾﾙﾌ ﾃｽﾄ | Instructs transmitter to perform internal self test. | msrc_UNKNOWN | Details |
| start_total | 42ED | Start | Enables the internal totalizers to begin counting. | msrc_UNKNOWN | Details |
| stop_total | 42EE | Stop | Prevents the internal totalizers from counting. | msrc_UNKNOWN | Details |
| reset_all_total | 42EF | Reset All | すべてのﾄｰﾀﾗｲｻﾞｰをﾘｾｯﾄします | msrc_UNKNOWN | Details |
| reset_mass_total | 42F0 | Reset Total | 質量流量ﾄｰﾀﾗｲｻﾞｰをﾘｾｯﾄします | msrc_UNKNOWN | Details |
| reset_vol_total | 42F1 | Reset Total | 体積流量ﾄｰﾀﾗｲｻﾞｰをﾘｾｯﾄします | msrc_UNKNOWN | Details |
| reset_gas_std_vol_total | 42F2 | Reset Total | Resets internal totalizers. | msrc_UNKNOWN | Details |
| alarm1_stat | 42F3 | Status Event1 | When set, indicates that Event 1 has reached its programmed setpoint. | msrc_UNKNOWN | Details |
| alarm2_stat | 42F4 | Status Event2 | When set, indicates that Event 2 has reached its programmed setpoint. | msrc_UNKNOWN | Details |
| do1_stat | 42F5 | Status DO1 | When set, indicates that DO 1 has been triggered. | msrc_UNKNOWN | Details |
| view_xmtr_status | 42F6 | Alerts | Reports any currently active device status information. | msrc_UNKNOWN | Details |
| abort_auto_zero | 42DC | Aborts Auto Zero operation and continues to use previous zero offset value. | msrc_UNKNOWN | Details | |
| leave_fixed_freq_mode | 42E8 | Exits fixed mode and returns the frequency output to its active state. | msrc_UNKNOWN | Details | |
| mmi_leave_analog_fixed_current_mode1 | 42EA | 固定電流ﾓｰﾄﾞを終ります | 現在の固定ﾓｰﾄﾞを終了 - 選択したｱﾅﾛｸﾞ出力を定数値のﾓｰﾄﾞから移行させ, 出力が入力に応じて変わるﾓｰﾄﾞに戻します。 | msrc_UNKNOWN | Details |
| abort_send | 42DE | msrc_UNKNOWN | Details | ||
| must_send_fault_level | 40DF | msrc_UNKNOWN | Details | ||
| must_send_pv | 4001 | msrc_UNKNOWN | Details | ||
| must_send_sv | 4003 | msrc_UNKNOWN | Details | ||
| must_send_tv | 4005 | msrc_UNKNOWN | Details | ||
| must_send_event_var | 42F7 | msrc_UNKNOWN | Details | ||
| must_send_units | 4009 | msrc_UNKNOWN | Details | ||
| must_send_scaling | 40C4 | msrc_UNKNOWN | Details | ||
| write_alarm_severity_meth | 42F8 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| read_alarm_severity_meth | 42F9 | Read Severity | Reports the severity level of the selected alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| review_alarm_severity_meth | 42FA | Review Severity (All) | Reports the severity level of all the alarms. | msrc_UNKNOWN | Details |
| write_discrete_assignment_meth_smv | 4B5C | Assign Discrete Action | Assigns a discrete to an action. Select none for no discrete assignment. | msrc_UNKNOWN | Details |
| write_discrete_assignment_meth | 42FB | Assign Discrete Action | Assigns a discrete to an action. Select none for no discrete assignment. | msrc_UNKNOWN | Details |
| read_discrete_assignment_meth | 42FC | Read Discrete Action Assignment | For a selected discrete action, reports the associated discrete assignment. | msrc_UNKNOWN | Details |
| read_discrete_assignment_meth_smv | 4B5D | Read Discrete Action Assignment | For a selected discrete action, reports the associated discrete assignment. | msrc_UNKNOWN | Details |
| review_discrete_assignment_meth_smv | 4B5E | Review All Discrete Actions | Cycles through the discrete actions and reports the associated discrete assignments. | msrc_UNKNOWN | Details |
| review_discrete_assignment_meth | 42FD | Review All Discrete Actions | Cycles through the discrete actions and reports the associated discrete assignments. | msrc_UNKNOWN | Details |
| select_acknowledge_alarm | 42FE | Acknowledge the selected alarm | msrc_UNKNOWN | Details | |
| perform_varDiagnostic_Action_Code | 42FF | Perform Diagnostic Action | msrc_UNKNOWN | Details | |
| perform_ack_all | 44F6 | Acknowledge All Alerts | msrc_UNKNOWN | Details | |
| read_modbus_register | 4300 | Modbus ﾃﾞｰﾀの読み取り | msrc_UNKNOWN | Details | |
| write_modbus_register | 4301 | Modbus ﾃﾞｰﾀの書き込み | msrc_UNKNOWN | Details | |
| write_simulation_params_massflow | 4302 | Simulate Mass Flow Rate | msrc_UNKNOWN | Details | |
| write_simulation_params_temp | 4303 | Simulate Temperature | msrc_UNKNOWN | Details | |
| write_simulation_params_Density | 4304 | Simulate Density | msrc_UNKNOWN | Details | |
| write_simulation_params_massflow_hh | 4B5F | Simulate Mass Flow Rate | msrc_UNKNOWN | Details | |
| write_simulation_params_temp_hh | 4B60 | Simulate Temperature | msrc_UNKNOWN | Details | |
| write_simulation_params_Density_hh | 4B61 | Simulate Density | msrc_UNKNOWN | Details | |
| read_di_1_state | 4402 | Read Discrete In | Reads the state of the Discrete Input. | msrc_UNKNOWN | Details |
| refresh_alarm_history | 4403 | Refresh Alarm Event Log | Uploads the 50 alarm history records from the device. This method takes approximately 30 sec to run. | msrc_UNKNOWN | Details |
| set_FO_Fault | 449B | Set Fault Parameters | msrc_UNKNOWN | Details | |
| meth_meter_verification | 44E6 | ﾒｰﾀｰ検証 | ﾒｰﾀｰ検証をｽﾀｰﾄし、結果の「ﾊﾟｽ」または「失敗」を表示します。この処理は最大で 4 分かかります。 | msrc_UNKNOWN | Details |
| method_view_test_results | 4B62 | 最新のﾃｽﾄ結果 | msrc_UNKNOWN | Details | |
| set_FO_scaling | 44EF | Set Frequency Output Scaling | msrc_UNKNOWN | Details | |
| reset_config_changed_flag | 462A | Reset Configuration Changed Flag | msrc_UNKNOWN | Details | |
| display_DD_build_number | 4716 | HART DD Information | msrc_UNKNOWN | Details | |
| method_primary_purpose_variable_375 | 4718 | Primary Purpose Variables | msrc_UNKNOWN | Details | |
| method_primary_purpose_variable_gsv_hh | 4B64 | Primary Purpose Variables | msrc_UNKNOWN | Details | |
| method_variable_summary_hh | 4B65 | Variable Summary | msrc_UNKNOWN | Details | |
| method_variable_summary_gsv_hh | 4B66 | Variable Summary | msrc_UNKNOWN | Details | |
| method_device_status_hh | 4B67 | Device Status: Good | msrc_UNKNOWN | Details | |
| meth_burst_mode_hh | 4B68 | msrc_UNKNOWN | Details | ||
| method_refresh_alerts_hh | 4B69 | Refresh Alerts | msrc_UNKNOWN | Details | |
| method_setup_burst | 46E8 | Set Up Burst Mode | msrc_UNKNOWN | Details | |
| meth_characterize_sensor | 471F | Sensor | ｾﾝｻｰ特性についてﾄﾗﾝｽﾐｯﾀを設定して下さい。 | msrc_UNKNOWN | Details |
| meth_configure_i_o | 4722 | Inputs/Outputs | ﾁｬﾝﾈﾙ、入力、出力、変数ﾏｯﾋﾟﾝｸﾞ、通信の各設定を行います。 | msrc_UNKNOWN | Details |
| method_special_units | 472F | 特殊単位 | 既存の測定単位を別の単位に変換するために必要なﾊﾟﾗﾒｰﾀを設定します。 | msrc_UNKNOWN | Details |
| method_external_compensation | 4731 | 外圧/外部温度 | 圧力/温度ﾃﾞﾊﾞｲｽのﾎﾟｰﾘﾝｸﾞにより取得した外部入力を受け取るようにﾄﾗﾝｽﾐｯﾀを設定します。 | msrc_UNKNOWN | Details |
| method_GSV_setup | 4732 | Gas Standard Volume | ｶﾞｽ標準体積の測定用にﾄﾗﾝｽﾐｯﾀを設定します。 | msrc_UNKNOWN | Details |
| method_display_variables | 4735 | Display Variables | msrc_UNKNOWN | Details | |
| method_display_precision | 4736 | Decimal Places | msrc_UNKNOWN | Details | |
| meth_setup_channels | 4738 | Channels | msrc_UNKNOWN | Details | |
| meth_setup_mA_output | 4739 | mA Output | msrc_UNKNOWN | Details | |
| meth_setup_fo_output | 473A | Frequency Output | msrc_UNKNOWN | Details | |
| meth_setup_do_output | 473B | Discrete Output | msrc_UNKNOWN | Details | |
| meth_map_variables | 473C | Variable Mapping | 1次 (PV)、2次 (SV)、3次(TV)、4次 (QV)に変数をﾏｯﾋﾟﾝｸﾞして下さい。 | msrc_UNKNOWN | Details |
| meth_view_alert_severity | 473D | View Alert Severity | msrc_UNKNOWN | Details | |
| method_alert_a001 | 473E | A001: EEPROM Error (Core Processor) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a001 | 473F | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a002 | 4740 | A002: RAM Error (Core Processor) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a002 | 4741 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a003 | 4742 | A003: No Sensor Response | msrc_UNKNOWN | Details | |
| method_add_info_alert_a003 | 4743 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_a004 | 4744 | A004: Temperature Overrange | msrc_UNKNOWN | Details | |
| method_add_info_alert_a004 | 4745 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_a005 | 4746 | A005:質量流量ｵｰﾊﾞｰ ﾚﾝｼﾞ | msrc_UNKNOWN | Details | |
| method_add_info_alert_a005 | 4747 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_Curved_tube_a006 | 4748 | A006: Characterization Required | msrc_UNKNOWN | Details | |
| method_add_info_alert_Curved_tube_a006 | 4749 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_T_series_a006 | 474A | A006: Characterization Required | msrc_UNKNOWN | Details | |
| method_add_info_alert_T_series_a006 | 474B | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_a008 | 474C | A008: Density Overrange | msrc_UNKNOWN | Details | |
| method_add_info_alert_a008 | 474D | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a009 | 474E | A009: Transmitter Initializing/Warming Up | msrc_UNKNOWN | Details | |
| method_add_info_alert_a009 | 474F | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a010 | 4750 | A010: Calibration Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a010 | 4751 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a011 | 4752 | A011: Zero Calibration Failed: Low | msrc_UNKNOWN | Details | |
| method_add_info_alert_a011 | 4753 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a012 | 4754 | A012: Zero Calibration Failed: High | msrc_UNKNOWN | Details | |
| method_add_info_alert_a012 | 4755 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a013 | 4756 | A013: Zero Calibration Failed: Unstable | msrc_UNKNOWN | Details | |
| method_add_info_alert_a013 | 4757 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a014 | 4758 | A014: Transmitter Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a014 | 4759 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a016 | 475A | A016: Sensor RTD Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a016 | 475B | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_a017 | 475C | A017: T-Series RTD Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a017 | 475D | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_Curved_tube_a020 | 475E | A020: No Flow Calibration Value | msrc_UNKNOWN | Details | |
| method_add_info_alert_Curved_tube_a020 | 475F | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_T_series_a020 | 4760 | A020: No Flow Calibration Value | msrc_UNKNOWN | Details | |
| method_add_info_alert_T_series_a020 | 4761 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_a021 | 4762 | A021: No K1 Value | msrc_UNKNOWN | Details | |
| method_add_info_alert_a021 | 4763 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_a029 | 4764 | A029: PIC/Daughterboard Communication Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a029 | 4765 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a030 | 4766 | A030: Incorrect Board Type | msrc_UNKNOWN | Details | |
| method_add_info_alert_a030 | 4767 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a031 | 4768 | A031: Low Power | msrc_UNKNOWN | Details | |
| method_add_info_alert_a031 | 4769 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a032 | 476A | A032: ｽﾏｰﾄ ﾒｰﾀ検証が進行中: 出力が固定されています | msrc_UNKNOWN | Details | |
| method_add_info_alert_a032 | 476B | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a033 | 476C | A033: No Right/Left Pickoff Signal | msrc_UNKNOWN | Details | |
| method_add_info_alert_a033 | 476D | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a100 | 476E | A100: mA Output Saturated | msrc_UNKNOWN | Details | |
| method_add_info_alert_a100 | 476F | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_a101 | 4770 | A101: mA Output Fixed | msrc_UNKNOWN | Details | |
| method_add_info_alert_a101 | 4771 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_a102 | 4772 | A102: Drive Overrange | msrc_UNKNOWN | Details | |
| method_add_info_alert_a102 | 4773 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a104 | 4774 | A104:ｷｬﾘﾌﾞﾚｰｼｮﾝを実行中です | msrc_UNKNOWN | Details | |
| method_add_info_alert_a104 | 4775 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a105 | 4776 | A105:ｽﾗｸﾞ ﾌﾛｰ | msrc_UNKNOWN | Details | |
| method_add_info_alert_a105 | 4777 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_a106 | 4778 | A106: Burst Mode Enabled | msrc_UNKNOWN | Details | |
| method_add_info_alert_a106 | 4779 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a107 | 477A | A107: Power Reset Occurred | msrc_UNKNOWN | Details | |
| method_add_info_alert_a107 | 477B | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a110 | 477C | A110: Frequency Output Saturated | msrc_UNKNOWN | Details | |
| method_add_info_alert_a110 | 477D | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_a111 | 477E | A111: Frequency Output Fixed | msrc_UNKNOWN | Details | |
| method_add_info_alert_a111 | 477F | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_a113 | 4780 | A113: mA Output 2 Saturated | msrc_UNKNOWN | Details | |
| method_add_info_alert_a113 | 4781 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_a114 | 4782 | A114: mA Output 2 Fixed | msrc_UNKNOWN | Details | |
| method_add_info_alert_a114 | 4783 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_a115 | 4784 | A115: No External Input or Polled Data | msrc_UNKNOWN | Details | |
| method_add_info_alert_a115 | 4785 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_a131 | 4786 | A131:ﾒｰﾀｰを検証しています | msrc_UNKNOWN | Details | |
| method_add_info_alert_a131 | 4787 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a132 | 4788 | A132: Sensor Simulation Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_a132 | 4789 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a133 | 478A | A133: EEPROM Error (Display) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a133 | 478B | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_discrete_event_1_active | 478C | Discrete Event 1 Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_event_1_active | 478D | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_discrete_event_2_active | 478E | Discrete Event 2 Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_event_2_active | 478F | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_discrete_event_3_active | 4790 | Discrete Event 3 Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_event_3_active | 4791 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_discrete_event_4_active | 4792 | Discrete Event 4 Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_event_4_active | 4793 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_discrete_event_5_active | 4794 | Discrete Event 5 Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_event_5_active | 4795 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_discrete_input_active | 4796 | Discrete Input Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_input_active | 4797 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_pv_out_of_limits | 4798 | Primary Variable Out of Limits | msrc_UNKNOWN | Details | |
| method_add_info_alert_pv_out_of_limits | 4799 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_non_pv_out_of_limits | 479A | Non-Primary Variable Out of Limits | msrc_UNKNOWN | Details | |
| method_add_info_alert_non_pv_out_of_limits | 479B | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_pv_mA_output_saturated | 479C | Primary Variable mA Output Saturated | msrc_UNKNOWN | Details | |
| method_add_info_alert_pv_mA_output_saturated | 479D | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_pv_mA_output_fixed | 479E | Primary Variable mA Output Fixed | msrc_UNKNOWN | Details | |
| method_add_info_alert_pv_mA_output_fixed | 479F | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_cold_start | 47A0 | Cold Start | msrc_UNKNOWN | Details | |
| method_add_info_alert_cold_start | 47A1 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_config_changed | 47A2 | Configuration Changed | msrc_UNKNOWN | Details | |
| method_add_info_alert_config_changed | 47A3 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_device_malfunction | 47A4 | Field Device Malfunction | msrc_UNKNOWN | Details | |
| method_add_info_alert_device_malfunction | 47A5 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| write_alarm_severity_meth_a003 | 462D | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a005 | 462E | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a006 | 462F | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a008 | 4630 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a009 | 4631 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a011 | 4632 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a012 | 4633 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a013 | 4634 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a016 | 4635 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a017 | 4636 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a020 | 4637 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a033 | 4638 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a100 | 4639 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a101 | 463A | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a102 | 463B | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a104 | 463C | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a105 | 463D | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a106 | 463E | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a107 | 463F | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a110 | 4642 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a111 | 4643 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a113 | 47A6 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a114 | 47A7 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a115 | 4644 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a131 | 4646 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a132 | 4647 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a133 | 47A8 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| perform_factory_zero | 4968 | Restore Factory Zero | msrc_UNKNOWN | Details | |
| meth_meter_verification_online | 4969 | ｽﾀｰﾄ | ﾒｰﾀｰ検証をｽﾀｰﾄし、結果の「ﾊﾟｽ」または「失敗」を表示します。この処理は最大で 4 分かかります。 | msrc_UNKNOWN | Details |
| method_turn_off_schedule_invalid_hh | 4B6A | ｽｹｼﾞｭｰﾙを Off にして下さい | ｽﾏｰﾄ ﾒｰﾀ性能検証ｽｹｼﾞｭｰﾗをｵﾌにします。 | msrc_UNKNOWN | Details |
| abort_meter_verification | 44E7 | msrc_UNKNOWN | Details | ||
| meth_meter_verification_upload_results | 496B | msrc_UNKNOWN | Details | ||
| method_setup_schedule | 496C | ｾｯﾄｱｯﾌﾟ | msrc_UNKNOWN | Details | |
| method_setup_event_trigger | 496E | Setup Event Trigger | msrc_UNKNOWN | Details | |
| method_upload_mv_results | 4970 | Upload Results Data from Device | msrc_UNKNOWN | Details | |
| method_show_results_table_hh | 4B6B | Show Results Table | msrc_UNKNOWN | Details | |
| method_turn_off_schedule_hh | 4B6C | ｽｹｼﾞｭｰﾙを Off にして下さい | msrc_UNKNOWN | Details | |
| write_alarm_severity_meth_a034 | 4973 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a035 | 4974 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| method_alert_a034 | 4975 | A034:ﾒｰﾀｰの検証に失敗しました | msrc_UNKNOWN | Details | |
| method_add_info_alert_a034 | 4976 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_a035 | 4977 | A035:ﾒｰﾀｰの検証を中止しました | msrc_UNKNOWN | Details | |
| method_add_info_alert_a035 | 4978 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| meth_ld_optimization | 49FB | LD 最適化 | ﾄﾗﾝｽﾐｯﾀの LD 最適化を設定します。LD 最適化は、炭化水素ｱﾌﾟﾘｹｰｼｮﾝの大型ｾﾝｻにのみ使用します。 | msrc_UNKNOWN | Details |
| meth_communications | 49FC | Communications | msrc_UNKNOWN | Details | |
| meth_show_last_20_results | 49FE | 最新の結果20を表示 | msrc_UNKNOWN | Details | |
| convert_To_Percent | 49FF | msrc_UNKNOWN | Details | ||
| convert_From_Percent | 4A00 | msrc_UNKNOWN | Details | ||
| method_upload_mv_results_hh | 4B6D | Upload Results Data from Device | msrc_UNKNOWN | Details | |
| write_alarm_severity_meth_new | 4A02 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| meth_view_alert_severity_new | 4A04 | View Alert Severity | msrc_UNKNOWN | Details | |
| meth_setup_discrete_input | 4AEB | Discrete Input | msrc_UNKNOWN | Details | |
| write_discrete_ip_assignment_meth_hh | 4B6E | Assignment | Assigns a discrete to an action. Select none for no discrete assignment. | msrc_UNKNOWN | Details |
| meth_device_reset | 4B02 | 機器のﾘｾｯﾄ | 機器ﾘｾｯﾄ - ﾘｾｯﾄを実行するようにｴﾚｸﾄﾛﾆｸｽに指示します。これは, ﾌｨｰﾙﾄﾞ機器の電源の切/入と等価です。 | msrc_UNKNOWN | Details |
| restore_factory_configure | 4B03 | 工場設定を復元して下さい | msrc_UNKNOWN | Details | |
| method_alert_a118 | 4B6F | A:.ﾃﾞｨｽｸﾘｰﾄ出力固定 | msrc_UNKNOWN | Details | |
| warning_message | 1017 | ﾙｰﾌﾟをﾏﾆｭｱﾙにします | msrc_UNKNOWN | Details | |
| transmitter_dac_trim | 1024 | D/A ﾄﾘﾑ | D/A ﾄﾘﾑ (ﾃﾞｼﾞﾀﾙ/ｱﾅﾛｸﾞ ﾄﾘﾑ) - ｵﾍﾟﾚｰﾃｨﾝｸﾞ ｴﾝﾄﾞ ﾎﾟｲﾝﾄに対するｱﾅﾛｸﾞ出力と外部指示計とのｷｬﾘﾌﾞﾚｰｼｮﾝを行います。 | msrc_UNKNOWN | Details |
| return_to_normal | 1016 | ﾉｰﾏﾙ ﾓｰﾄﾞに戻します | msrc_UNKNOWN | Details | |
| leave_fixed_current_mode | 1003 | 固定電流ﾓｰﾄﾞを終ります | 現在の固定ﾓｰﾄﾞを終了 - ｱﾅﾛｸﾞ出力を定数値のﾓｰﾄﾞから移行させ, 出力が入力に応じて変わるﾓｰﾄﾞに戻します。 | msrc_UNKNOWN | Details |
| Name | ID | Label | Description | Type | Source |