Device dictionary

Loading…

Reference ID	String
0	Lev
1
2	Dis
3	Conv.
4	Ullage
5	Int.Level
6	Int.Dist.
7	Layer
8	Int.Conv.
9	Int.Ullage
10	Conv.Layer
11	EpsR Calc.
12	Temp.Conv.
13	Temp.Sensor
14	Er Gas Calc.
15	Production Number
16	Length Unit (HART)
17	Conversion Unit (HART)
18	Cum
19	Dielectric unit
20
21	Level
22	Update Period
23	Level Update Period
24	.0f
25	.1f
26	.3f
27	.4f
28	Process Data Quality 'PDQ' - Indicates the overall process data quality of the device variable value.
29	LS
30	Limit Status 'LS' - Indicates whether the device variable is limited (i.e., not responding to a process).
31	Level Fmly stat
32	Level Dev fmly
33	Level Class
34	Pres Lower trim
35	Pres Upper trim
36	Pres Trim support
37	Pres Min lower trim
38	Pres Max lower trim
39	Pres Min upper trim
40	Pres Max upper trim
41	Pres Min trim diff
42	Distance
43	Distance Fmly stat
44	Distance Update Period
45	Conversion
46	Volume Fmly stat
47	Volume Update Period
48	Conversion Class
49	Ullage Conversion
50	Ullage Fmly stat
51	Ullage Update Period
52	Ullage Class
53	Interface Distance
54	Interface Distance Fmly stat
55	Interface Distance Class
56	Interface Distance Update Period
57	Interface Level
58	Interface Fmly stat
59	Interface Class
60	Interface Update Period
61	Layer
62	Interface Layer Fmly stat
63	Interface Layer Class
64	Interface Layer Update Period
65	Interface Conversion
66	Inter Level Conv Fmly stat
67	Inter Level Conv Update Period
68	Inter Level Conv Class
69	Interface Ullage Conversion
70	Inter Dist Conv Fmly stat
71	Inter Dist Conv Update Period
72	Inter Dist Conv Class
73	Conversion Layer
74	Layer Conv Fmly stat
75	Layer Conv Update Period
76	Layer Conv Class
77	Epsilon R Product Calculated
78	Dielectric Fmly stat
79	Dielectric Update Period
80	Dielectric Class
81	Epsilon R Gas Calculated
82	Dielectric Gas Fmly stat
83	Dielectric Gas Update Period
84	Dielectric Gas Class
85	Temperature Converter
86	Conv Temp Fmly stat
87	Conv Temp Update Period
88	Conv Temp Class
89	Temperature Sensor
90	Sens Temp Fmly stat
91	Sens Temp Update Period
92	Sens Temp Class
93	4.1f
94	SV % range
95	.2f
96	Krohne
97	OPTIFLEX 3200/6200/7200/8200
98	Failure
99	Out Of Specification
100	Function Check
101	Device Configuration Locked
102	Simulation Active
103	Oscillator Frequency Failure
104	Current Output Drift
105	Sensor ROM error
106	Sensor RAM error
107	Sensor EEPROM error
108	Converter ROM error
109	Converter RAM error
110	Converter EEPROM error
111	Sensor Processing Failure
112	Sensor Not Compatible
113	Temperature Out of Range
114	Internal Communication Error
115	Sensor Voltage Error
116	Converter Voltage Error
117	Reference Pulse Lost Error
118	Level Pulse Lost Error
119	Overfill (Error)
120	Empty (Error)
121	Flange Lost
122	Snapshot Invalid
123	Probe Analysis Invalid
124	Reference Position Outside Range
125	Audio Signal Offset Outside Range
126	Temperature Below -35°C
127	Temperature Above +75°C
128	Tank Empty (Warning)
129	Local Operation on the device (Warning)
130	Overfill (Warning)
131	Level Lost (Warning)
132	Temperature Out of Range (Warning)
133	First Start
134	Epsilon R Calculation Frozen
135	Epsilon R Value Low
136	Epsilon R Value High
137	Temperature Outside Operating Range of HMI
138	Measurement Not Updated
139	Snapshot: Distance Validation Not Required
140	Analysis Data Available
141	Optional Output Drift
142	Sensor - Time Out DMA
143	Sensor - Time Out Lock PLL
144	Sensor - Time Out Switch Clock
145	Sensor - Time Out Load ASIC
146	Sensor - Time Out SPI R/W
147	Sensor - Voltage 5V Error
148	Sensor - Voltage 2.5V Error
149	Sensor - Voltage 1.5V Error
150	Sensor - Time Out Power Good
151	Relay State Not Correct
152	Clock Pulse Generator KO
153	Clock Sampler & Hold KO
154	Real Time Clock (RTC) Failure
155	Interface - Lost (Error)
156	Interface - Overfill (Error)
157	Interface - Empty (Error)
158	Leak Detected (Error)
159	Leak Detected (Warning)
160	Sensor - Temperature Too Low
161	Sensor - Temperature Too High
162	Auto Setup Required
163	Reference Pulse Amplitude Anomaly
164	Reference Pulse Width Anomaly
165	Leak Detection not Possible
166	Noisy Signal
167	Interface - Lost (Warning)
168	Interface - Empty (Warning)
169	Interface - Overfill (Warning)
170	No Layer
171	Current Output 1 Saturated
172	Current Output 2 Saturated
173	Dielectric Gas - Value Low
174	Dielectric Gas - Value High
175	Dielectric Gas - Calcul.Frozen
176	FPGA Update in progress...
177	Optional Output Detected
178	Relay State: Closed
179	Write Protection
180	Not Write Protected
181	Write Protected
182	Device Under Local Control
183	Not Under Local Control
184	Local Control in Use
185	Firmware version
186	nPoint_lbl
187	.2d
188	Access Level
189	Read Only
190	Supervisor
191	Service
192	Master
193	interfaceOption_lbl
194	ninst_enu
195	inst_enu
196	Features Available
197	HART
198	MODBUS
199	PA
200	FF
201	Reserv.
202	Automatic Offset Calculation
203	Dynamic Parasite Rejection
204	Dynamic Precision
205	Gas Phase Compensation
206	Leak Detection
207	Interface
208	WHG
209	SIL
210	Optional Output
211	Device Type
212	Company 0
213	Company 1
214	Company 2
215	Company 3
216	Company 4
217	Company 5
218	Company 6
219	Company 7
220	Company 8
221	Company 9
222	Company 10
223	Company 11
224	Company 12
225	Company 13
226	Company 14
227	Company 15
228	TDR(0) Radar(1)
229	Platform (bit 0)
230	Platform (bit 1)
231	Platform (bit 2)
232	Platform (bit 3)
233	9x00
234	8x00
235	7x00
236	6x00
237	5x00
238	4x00
239	3x00
240	2x00
241	1x00
242	Generation (0=New)
243	Device
244	OPTIFLEX 7200
245	OPTIFLEX 3200
246	OPTIFLEX x200
247	OPTIFLEX 8200
248	OPTIFLEX 6200
249	SIL Enable Flag
250	WHG Enable Flag
251	Device under local control
252	Measuring Mode
253	Direct
254	Automatic
255	SnapshotActivation_lbl
256	SnapshotActivation_hlp
257	Snapshot_disable_enu
258	Snapshot_enable_enu
259	Auto product epsilon R
260	This parameter activates or deactivates the automatic calculation of the dielectric constant of the product.
261	No
262	Yes
263	Output Error Delay
264	The time after which the current output changes to an error value. The error value shows that there is a measurement error.
265	0 S
266	10 S
267	20 S
268	30 S
269	1 Mn
270	2 Mn
271	5 Mn
272	15 Mn
273	Output Range
274	4-20
275	4-20 Error=22mA
276	4-20 Error=3.6mA
277	3.8-20.5 Error=22mA
278	3.8-20.5 Error=3.6mA
279	131 reading
280	Output Function
281	Interface Distance
282	Interface Level Conversion
283	Interface Distance Conversion
284	Layer Conversion
285	Dielectric Product
286	Converter Temperature
287	Sensor Temperature
288	Dielectric Gas
289	postEditOutputFunction
290	Lenght Unit (On Local Display)
291	m
292	cm
293	mm
294	inch
295	feet
296	Conversion Unit (On Local Display)
297	m3
298	L
299	US Gal
300	GB Gal
301	feet3
302	barrel
303	Kg
304	Ton
305	GB Ton
306	US Ton
307	m3/h
308	ft3/h
309	Language
310	English
311	German
312	French
313	Italian
314	Spanish
315	Portugese
316	Japanese
317	Chinese
318	Russian
319	Turkish
320	Czech
321	Polish
322	One parameter has a value too high
323	One parameter has a value too low
324	Probe Length
325	Probe length is the distance from the flange face/thread stop of the device down to the bottom end of the probe (including counterweight for cable versions).
326	Block Distance
327	The blocking distance defines the non-measuring range at the top of the probe. It depends on installed probe type and the installation type.
328	Tank Height
329	Tank height is the distance from the tank connecting flange's top edge/thread stop down to the bottom of the tank.
330	Time Constant
331	New measured values are damped (filtered) with the time constant. Thus abrupt changes of the current output and the displayed values are damped.
332	Tracking Velocity
333	This function defines the maximum rate of change of the level that can occur in operation. The measured value of the device cannot change at a faster rate than the tracking velocity.
334	m/min
335	Epsilon R gas
336	This parameter corresponds to the dielectric constant of the gas which is situated between the flange face and the product. In most applications, this parameter should not be changed (dielectric ambient air = 1,0).
337	Epsilon R Product
338	For applications with low dielectric constant. The most accurate value possible must be typed into this parameter.
339	Level Threshold
340	This corresponds to the level threshold of the signal amplitude. If the signal goes beyond this threshold, it is measured. Otherwise, it is ignored.
341	°/00
342	Probe End Threshold
343	This corresponds to the probe end threshold. If the signal goes beyond this threshold, it is measured. Otherwise, it is ignored.
344	Epsilon R Product mini.
345	Epsilon R Product maxi.
346	Code 1
347	Supervisor Password
348	off
349	on
350	Active password cannot be changed
351	Illegal password symbols
352	Wrong password
353	Table not monotonous
354	Point value too high
355	Point value too low
356	as_specialist_lbl
357	Serial Number
358	Converter Firmware Version
359	Sensor Firmware Version
360	HMI Firmware Version
361	Electronic Revision
362	Mechanical Traceability
363	requested access level
364	No Access (Log Out)
365	Supervisor (Normal User)
366	Service (Specialist User)
367	Master (Production User)
368	Access granted as
369	Access Not Granted
370	Supervisor
371	Service
372	Master
373	Encrypted password
374	Distance unit
375	Level Pulse Distance
376	Reference Amplitude
377	Level Pulse Amplitude
378	Probe End Pulse Amplitude
379	Interface Distance unit
380	Interface Pulse Distance
381	Interface Pulse Amplitude
382	Flange Pulse Amplitude
383	Detection Delay
384	Snapshot Size
385	Snapshot Mode
386	Disable
387	Static
388	Dynamic
389	Static+Dynamic
390	Auto Probe Length
391	No
392	Yes
393	advanced_function_mode
394	Bottom Blocking Distance Direct too large
395	Bottom Blocking Distance Direct too small
396	Bottom Blocking Distance TBF too large
397	Bottom Blocking Distance TBF too small
398	Remote cable length too large
399	Remote cable length too small
400	Remote Cable Dielectric too large
401	Remote Cable Dielectric too small
402	Remote Cable Attenuation too large
403	Remote Cable Attenuation too small
404	Tank Bottom Offset too large
405	Tank Bottom Offset too Small
406	Reference Offset too large
407	Reference Offset too small
408	Stilling well height too large
409	Stilling well height too small
410	Stilling well Diameter too large
411	Stilling well Diameter too small
412	Flange Threshold too large
413	Flange Threshold too small
414	Bottom Blocking Distance Direct
415	Bottom Blocking Distance TBF
416	Remote Cable Length
417	Remote Cable Er
418	Remote Cable Attenuation
419	Tank Bottom Offset
420	Reference Offset
421	Stilling Well Height
422	Stilling Well Diameter
423	Flange Threshold
424	Asic Pulse Selection Mode Invalid
425	Asic Pulse Width Invalid
426	Asic Pulse Amplitude Invalid
427	Asic Pulse Sign Invalid
428	Asic Gain Amplifier Linear Invalid
429	Asic Gain Amplifier Log Invalid
430	Asic Low Pass Filter Invalid
431	Adc Sampling Rate Invalid
432	ASIC Pulse Selection Mode
433	Manual
434	Automatic
435	ASIC Pulse Width
436	400ps
437	600ps
438	800ps
439	1000ps
440	ASIC Pulse Amplitude
441	1500mV
442	1200mV
443	1000mV
444	500mV
445	ASIC Pulse Sign
446	Negative
447	Positive
448	ASIC Gain Amplifier Linear
449	0 dB
450	6 dB
451	12 dB
452	18 dB
453	24 dB
454	ASIC Gain Amplifier Log
455	Off
456	On
457	ASIC Low Pass Filter
458	50 kHz
459	100 kHz
460	ADC Sampling Rate
461	1 oo 1
462	1 oo 2
463	1 oo 3
464	1 oo 4
465	Process Type Invalid
466	Probe Type Invalid
467	Product Family Invalid
468	Application Type Invalid
469	Installation Type Invalid
470	Leak Detection Enable Invalid
471	Leak Detection Sensitivity Invalid
472	Date Time Format Invalid
473	Event Log Filter Invalid
474	Interface Lost Alarm Invalid
475	Converter Version Invalid
476	Display Mode Invalid
477	WHG Mode Enable Invalid
478	Dynamic Precision Enable Invalid
479	Process Type
480	STANDARD LIQUID FLANGE
481	STANDARD CLAMP
482	OTHER
483	STANDARD SOLID THREADED
484	STANDARD SOLID FLANGE
485	STANDARD LIQUID THREADED
486	HARD SEAL HT THREADED
487	HARD SEAL HT FLANGE
488	HARD SEAL HT_HP THREADED
489	HARD SEAL HT_HP FLANGE
490	DUAL HARD SEAL THREADED
491	DUAL HARD SEAL FLANGE
492	Probe Type
493	SINGLE ROD Ø8mm
494	SINGLE ROD Ø8mm PFA
495	CABLE Ø4mm C/W 20x100 Coated
496	OTHER
497	SINGLE ROD Ø16mm
498	CABLE Ø8mm C/W 12x100
499	CABLE Ø8mm C/W 38x245
500	CABLE Ø8mm OPEN END
501	DOUBLE ROD Ø8mm
502	COAX Ø22mm
503	COAX Ø22mm ADAPTED
504	COAX Ø42mm
505	CABLE Ø4mm C/W 20x100
506	CABLE Ø4mm + TURNBUCKLE
507	CABLE Ø4mm + CHUCK
508	CABLE Ø4mm THREADED END
509	CABLE Ø4mm CRIMPED END
510	CABLE Ø4mm OPEN END
511	CABLE Ø4mm + Centering C/W
512	DOUBLE CABLE Ø4mm C/W 38x60
513	REVERSE PROBE
514	Product Family
515	HYDROCARBON
516	MINERAL OIL
517	SOLVENT
518	OTHER LIQUID
519	MINERAL
520	PLASTIC
521	CEREALS
522	OTHER SOLID
523	ACIDS
524	ALCOHOL
525	BASE
526	LIQUID GAS
527	WATER BASED
528	Application Type
529	LEVEL
530	LEVEL + GAS COMPENSATED
531	INTERFACE WITH REVERSE PROBE
532	LEVEL + INTERFACE UNMIXED
533	LEVEL + INTERFACE MIXED
534	INTERFACE / FULLY SUBMERGED PROBE
535	Installation Type
536	TANK
537	STILLING WELL / BYPASS
538	Leak Detection
539	DISABLE
540	ENABLE
541	Leak Detection Sensitivity
542	1
543	2
544	3
545	4
546	5
547	Date/Time Format
548	yyyy-mm-dd 24h
549	yyyy-mm-dd 12h
550	dd-mm-yyyy 24h
551	dd-mm-yyyy 12h
552	mm-dd-yyyy 24h
553	mm-dd-yyyy 12h
554	Event Log Filter
555	ERROR ONLY
556	ERROR + WARNING
557	ERROR + WARNING + INFO
558	NO FILTER
559	Interface Lost Alarm
560	WARNING
561	ERROR
562	Converter Version
563	C: COMPACT
564	S: SENSOR EXTENSION
565	F: REMOTE VERSION
566	D: DOUBLE SENS.EXT.
567	Display Mode
568	Disable
569	Level
570	Conversion
571	Conversion Distance
572	Interface Level
573	Conversion Interface
574	Conversion Interface Distance
575	Conversion Layer
576	Dielectric Product
577	Converter Temperature
578	Sensor Temperature
579	Dielectric Gas
580	Current Output 1 (mA)
581	Current Output 1 (%)
582	Current Output 2 (mA)
583	Current Output 2 (%)
584	Relay State
585	Time
586	Date
587	WHG Mode
588	Disable
589	Enable
590	Dynamic Precision Monitoring
591	Optional Output Mode Invalid
592	Optional Output Function Invalid
593	Optional Output Range Invalid
594	Optional Output Scale 4mA Too Small
595	Optional Output Scale 4mA Too Large
596	Optional Output Scale 20mA Too Small
597	Optional Output Scale 20mA Too Large
598	Switch Function Invalid
599	Switch Threshold Too Small
600	Switch Threshold Too Large
601	Switch Hysteresis Too Small
602	Switch Hysteresis Too Large
603	Switch Output Mode Invalid
604	Status bit to track invalid
605	Optional Output Mode
606	Current
607	Relay
608	Output Function I2
609	postEditOptionalOutputFunction
610	Optional Output Range
611	Switch Output Function
612	I1 (mA)
613	I1 (%)
614	Status List
615	Set Point/Threshold
616	Hysteresis/Delay
617	Alarm Mode
618	Alarm = relay closed
619	Alarm = relay open
620	Error List
621	Leak Detection
622	Level Lost
623	Level Overfill
624	Level Empty
625	Interface Lost
626	Conv.Temp. Below -35°C
627	Conv.Temp. Above +75°C
628	Sensor Temp. Below -35°C
629	Sensor Temp. Above +75°C
630	Dielect.Prod.Calcul.Frozen
631	Interface Overfill
632	Interface Empty
633	Parasite Threshold Too Small
634	Parasite Threshold Too Large
635	Minimum Layer Product Too Small
636	Minimum Layer Product Too Large
637	Probe Head Attenuation Too Small
638	Probe Head Attenuation Too Large
639	Impedance Ratio Too Small
640	Impedance Ratio Too Large
641	Remote Offset Too Small
642	Remote Offset Too Large
643	Interface Threshold Too Small
644	Interface Threshold Too Large
645	Calspeed Installation Too Small
646	Calspeed Installation Too Large
647	Parasite Threshold
648	Min. Layer for Prod. Recognition
649	Probe Head Attenuation
650	Impedance Ratio
651	Remote Offset
652	Interface Threshold
653	Calspeed Installation
654	.5f
655	Level Lost Alarm
656	Warning
657	Error
658	Temperature Out Of Range Alarm
659	Overfill Alarm
660	Pulse Search Mode
661	Entire Search Disable
662	Search When Full or Empty
663	Search When Full only
664	Search When Empty only
665	Minimum Window
666	Empty Alarm
667	Leak Detection Alarm
668	Option 1
669	False
670	True
671	Option 2
672	Option 3
673	Option 4
674	Option 5
675	Option 6
676	Option 7
677	0
678	Option 8
679	Option 9
680	Option 10
681	Reference Point 1
682	Correction Point 1
683	Reference Point 2
684	Correction Point 2
685	Reference Point 3
686	Correction Point 3
687	Reference Point 4
688	Correction Point 4
689	type of snapshot
690	Static Total
691	Static partial with Level
692	Static partial with No level
693	Dynamic
694	Operation to execute
695	Cancel auto probe length result
696	Save auto probe length result
697	Save snapshot recording
698	Cancel snapshot recording
699	Probe length calculated
700	Probe end pulse type
701	Probe End Disable
702	Emitted Sign
703	Opposite Emitted Sign
704	Counterweight Height
705	Probe Type
706	Universal
707	Mono Cable 2mm
708	Mono Cable 4mm
709	Mono Cable 8mm
710	Twin Cable
711	Mono Rod
712	Twin Rod
713	Coax 50 Ohms
714	Coax 90 Ohms
715	Coax Adapted
716	Cmd166 dummy1
717	Electronic Offset
718	Calspeed Elec.
719	Calspeed Meca.
720	Attenuation Factor
721	Full Area
722	Empty Area
723	Minimum Layer
724	Mechanical Offset
725	Invalid Code: < Option Not Activated >
726	Feature Code
727	Activation Code
728	Functioning Time
729	H
730	Temperature
731	°C
732	Loop Current
733	mA
734	Load Current
735	Voltage 5,6V
736	V
737	Voltage on Capacitors
738	Voltage 3,3V
739	Reference Pulse Amplitude
740	Level Pulse Amplitude
741	Probe end Pulse Amplitude
742	Reset Counter
743	Invalid Function
744	Error Code
745	Time Stamp Last Error
746	Number Of Error
747	Cmd185 ProbeLength
748	Cmd185 TypeOfSnapshot
749	Snapshot Static Total
750	Snapshot Static Partial with Level
751	Snapshot Static Partial No Level
752	Cmd185 DistPartialSnapshot
753	Cmd185 FlangeCalcMethod
754	Flange Analysis Tank Empty
755	Flange Analysis Tube Empty
756	Flange Analysis Tank Not Empty
757	Flange Analysis Tube Not Empty
758	Cmd185 GasDielectCste
759	Cmd185 BypassDiameter
760	Cmd185 SingularCalculMethod
761	Singular Calc. Method Mode 0
762	Singular Calc. Method Mode 1
763	Singular Calc. Method Mode 2
764	Cmd185 RemoteCableLength
765	Cmd186 OperationCode
766	End Of Probe Analysis
767	Snapshot Recording
768	Flange Analysis
769	Singular Values Calculation
770	Auto Offset Calculation
771	Cmd187 EndOfProbeExecState
772	Cmd187 EndOfProbeProgressBar
773	Cmd187 EndOfProbeResult
774	Cmd187 EndOfProbeStatusFuncPulse1
775	Cmd187 EndOfProbePulse1Type
776	Cmd187 EndOfProbePulse1Distance
777	Cmd187 EndOfProbeStatusFuncPulse2
778	Cmd187 EndOfProbePulse2Type
779	Cmd187 EndOfProbePulse2Distance
780	Cmd187 SnapshotExecState
781	Cmd187 SnapshotProgressBar
782	Cmd187 SnapshotResult
783	Cmd187 SnapshotSize
784	Cmd187 SnapshotNextValidDist
785	Cmd187 FlangeAnalysisExecState
786	Cmd187 FlangeAnalysisProgressBar
787	Cmd187 FlangeAnalysisResult
788	Cmd187 FlangeAnalysisProbeHeadAtten
789	Cmd187 FlangeAnalysisImpedRatio
790	Cmd187 FlangeAnalysisFlangeThresh
791	Cmd187 SingValCalculExecState
792	Cmd187 SingValCalculProgressBar
793	Cmd187 SingValCalculResult
794	Cmd187 SingularValue1
795	Cmd187 SingularValue2
796	Cmd187 SingularValue3
797	Cmd187 SingularValue4
798	Cmd187 SingularValue5
799	Cmd187 AutoOffsetlCalculExecState
800	Cmd187 AutoOffsetlCalculProgressBar
801	Cmd187 AutoOffsetlCalculResult
802	Cmd187 RemoteOffsetValue
803	Installation Calspeed
804	Is Dielectric Product Known?
805	Epsilon R Gas
806	Probe End Threshold
807	Flange Threshold
808	Frame Number Sent to Sensor
809	Frame Number Received from Sensor
810	Comm. with Sensor Failure Ratio
811	Frame Number Sent to HMI
812	Frame Number Received from HMI
813	Comm. with HMI Failure Ratio
814	Relay Switch Counter
815	Number of points for Leak Detection invalid
816	Number of Singular value invalid
817	Singular Value too Small
818	Singular Value too Large
819	Flange Detection Delay too Small
820	Flange Detection Delay too Large
821	Log Compensation invalid
822	Number of Point for Leak Detection
823	Number of Singular Value for Leak Detection
824	Singular Value 1
825	Singular Value 2
826	Singular Value 3
827	Singular Value 4
828	Singular Value 5
829	Flange Detection Delay
830	Log Compensation
831	Noise Cancelling - Value invalid
832	Sensor Param_ID 175 - value invalid
833	Sensor Param_ID 176 - value invalid
834	Sensor Param_ID 177 - value invalid
835	Sensor Param_ID 178 - value invalid
836	Sensor Param_ID 179 - value invalid
837	Sensor Param_ID 180 - value invalid
838	Sensor Param_ID 181 - value invalid
839	Converter Param_ID 182 - value invalid
840	Converter Param_ID 183 - value invalid
841	Converter Param_ID 184 - value too small
842	Converter Param_ID 184 - value too large
843	Converter Param_ID 185 - value too small
844	Converter Param_ID 185 - value too large
845	Converter Param_ID 186 - value too small
846	Converter Param_ID 186 - value too large
847	Converter Param_ID 187 - value too small
848	Converter Param_ID 187 - value too large
849	Noise Cancelling
850	Sensor Param ID 175
851	Sensor Param ID 176
852	Sensor Param ID 177
853	Sensor Param ID 178
854	Sensor Param ID 179
855	Sensor Param ID 180
856	Sensor Param ID 181
857	Converter Param ID 182
858	Converter Param ID 183
859	Converter Param ID 184
860	Converter Param ID 185
861	Converter Param ID 186
862	Converter Param ID 187
863	Maintenance
864	Standard Status
865	Device Specific Status
866	Maintenance Required
867	Info
868	Test/Reset
869	Date and Time
870	Diagnostic
871	Measured Values
872	Output, HART Dynamic Vars
873	Current Output
874	Measured Values (Bar)
875	Level / Distance
876	Conversions
877	Measured Values (Scope)
878	Current
879	SV Output
880	Auto Setup
881	Basic Parameters
882	Info.
883	Advanced Setups
884	LogIn / LogOut
885	Setups
886	Options Setup
887	Maintenance Setups
888	Identification
889	Installation
890	Application
891	Probe
892	REMOTE
893	Outputs
894	Output 1
895	Output 2
896	Optional Current Output
897	Optional Relay Output
898	Leak Detection
899	Thresholds Settings
900	HART Variables
901	Display
902	Support
903	Internal Statistics
904	Future Features
905	Conversion Table (1-10)
906	Conversion Table (11-20)
907	Conversion Table (21-30)
908	Conversion Table (31-40)
909	Conversion Table (41-50)
910	Pt 1
911	Pt 2
912	Pt 3
913	Pt 4
914	Pt 5
915	Pt 6
916	Pt 7
917	Pt 8
918	Pt 9
919	Pt 10
920	Pt 11
921	Pt 12
922	Pt 13
923	Pt 14
924	Pt 15
925	Pt 16
926	Pt 17
927	Pt 18
928	Pt 19
929	Pt 20
930	Pt 21
931	Pt 22
932	Pt 23
933	Pt 24
934	Pt 25
935	Pt 26
936	Pt 27
937	Pt 28
938	Pt 29
939	Pt 30
940	Pt 31
941	Pt 32
942	Pt 33
943	Pt 34
944	Pt 35
945	Pt 36
946	Pt 37
947	Pt 38
948	Pt 39
949	Pt 40
950	Pt 41
951	Pt 42
952	Pt 43
953	Pt 44
954	Pt 45
955	Pt 46
956	Pt 47
957	Pt 48
958	Pt 49
959	Pt 50
960	upload_vars_lbl
961	menu_load_to_PC
962	Offline
963	Setup
964	Units
965	Mapping of Variables
966	InputPassword
967	Change/Activate Supervisor Password
968	disabled
969	Enabled
970	Output Calibration I1
971	Output Calibration I2
972	Loop test I2
973	Restart Device
974	Reset Factory
975	Reset Configuration Changed Flag
976	Reset of the HART 'Configuration Changed' flag.
977	Delete table
978	Delete Last Point
979	Add One Point
980	Modify One Point
981	Set Date and Time
982	ActivationCodeEntered
983	Gas Phase Compensation
984	Interface
985	Installation Setup
986	Device Outputs Setup
987	Application Setup
988	Maintenance Converter Setup
989	Maintenance Mechanic Setup
990	Reset Error Records
991	Erase Probe Analysis
992	Erase Snapshot Record
993	Set Epsilon R Gas
994	Set Epsilon R Product
995	Switch Output Test
996	Read Error History
997	Flange Analysis
998	Probe Analysis
999	Snapshot Recording
1000	Reset Leak Detection
1001	Auto Offset Calculation
1002	Save as Factory config.
1003	Delete All Options
1004	PV Analog Channel Saturated
1005	PV Analog Channel Fixed
1006	Wireless
1007	WirelessHART Device
1008	IEEE 802.15.4 2.4GHz DSSS with O-QPSK Modulation
1009	Primary
1010	Primary Analog Channel
1011	Secondary
1012	Secondary Analog Channel
1013	Tertiary
1014	Tertiary Analog Channel
1015	Quaternary
1016	Quaternary Analog Channel
1017	Quinary
1018	Quinary Analog Channel
1019	Critical Power Failure
1020	Lock all
1021	Trim not supported
1022	Configuration cannot be changed
1023	Locked by gateway
1024	Analog Input Channel
1025	Analog Output Channel
1026	Secondary Analog Channel Saturated
1027	Tertiary Analog Channel Saturated
1028	Quaternary Analog Channel Saturated
1029	Quinary Analog Channel Saturated
1030	Secondary Analog Channel Fixed
1031	Tertiary Analog Channel Fixed
1032	Quaternary Analog Channel Fixed
1033	Quinary Analog Channel Fixed
1034	Simulation active
1035	The device is in simulation mode and the level output is not representative of the process.
1036	Non-Volatile memory failure
1037	The Non-Volatile memory check is invalid or maybe corrupt, or the battery of a battery-backed memory has failed.
1038	Volatile memory error
1039	The RAM memory check is invalid or maybe corrupt
1040	Watchdog reset executed
1041	A watchdog reset has been performed
1042	Voltage conditions out of range
1043	A voltage condition is outside its allowable range
1044	Environmental conditions out of range
1045	An internal or environmental condition is beyond acceptable limits.
1046	Electronic failure
1047	A hardware problem not related to the sensor has been detected.
1048	Subdevice list changed
1049	Duplicate master detected
1050	Capacity Denied
1051	The device was unable to acquire the communication bandwidth required to support the Burst Messaging specified
1052	Bandwidth allocation pending
1053	Block transfer pending
1054	Battery life
1055	Percent range
1056	Loop current
1057	Primary variable
1058	Secondary variable
1059	Tertiary variable
1060	Quaternary variable
1061	Read receive time
1062	Write date and time
1063	Non-Volatile Clock
1064	When set the device contains a battery-backed clock. In this case, the clock does not need to be reset if there is a power failure.
1065	Clock Uninitialized
1066	The real-time clock has never been set with the date and time. For example, the clock is volatile and power was removed from and restored to the device.
1067	None
1068	No restrictions
1069	SI Only
1070	Restricted to SI Unit codes only
1071	Process automation device
1072	Discrete device
1073	Hybrid:Process automation+discrete
1074	I/O System
1075	WirelessHART Process automation device
1076	WirelessHART Discrete device
1077	WirelessHART Process automation+discrete
1078	WirelessHART Gateway
1079	WirelessHART Access point
1080	WirelessHART Process adapter
1081	WirelessHART Discrete adapter
1082	WirelessHART enabled handheld/portable maintenance tool
1083	Device Profile
1084	US
1085	United States of America
1086	JP
1087	Japan
1088	DE
1089	Germany
1090	FR
1091	France
1092	ES
1093	Spain
1094	RU
1095	Russian Federation
1096	CN
1097	People's Republic of China
1098	Secondary Master
1099	Primary Master
1100	Device Diagnostic Status 0
1101	Device Diagnostic Status 1
1102	I/O and Subdevice Status
1103	WirelessHART Status
1104	Time Set Option
1105	Real Time Clock Flags
1106	Country
1107	Country of intended device installation
1108	SI Unit Control
1109	Indicates if device should only display SI unit codes
1110	Time Stamp
1111	Relative time value on network
1112	8u
1113	Dynamic Variables Returned for Device Variables
1114	Command Response Truncated
1115	Configuration Change Counter Mismatch
1116	Status bytes mismatch
1117	8.3f
1118	Device Variable
1119	Analog Channel Number
1120	Analog Channel Number- Index into an array of Analog Channels.
1121	Index 1 into Analog Channel Array
1122	Index into Analog Channel Array- Is the first of an array of addresses, whose value is identified by the Analog Channel Code.
1123	Index 2 into Analog Channel Array
1124	Index into Analog Channel Array- Is the second of an array of addresses, whose value is identified by the Analog Channel Code.
1125	Index 3 into Analog Channel Array
1126	Index into Analog Channel Array- Is the third of an array of addresses, whose value is identified by the Analog Channel Code.
1127	Index 4 into Analog Channel Array
1128	Index into Analog Channel Array- Is the fourth of an array of addresses, whose value is identified by the Analog Channel Code.
1129	Current Date
1130	Current Date based upon the real-time clock in the field device
1131	Current Time
1132	Current Time based upon the real-time clock in the field device
1133	Set Clock Date
1134	Date to set the real-time clock in the field device to, or date that the real-time clock was last set
1135	Set Clock Time
1136	Time to set the real time clock in the field device to, or time that the real-time clock was last set
1137	Access Level: %{0}
1138	Read Only(Log Out);Supervisor;Service;Master
1139	Log Out: Confirm
1140	No;Yes
1141	Log Out: OK
1142	Please enter password:
1143	Write access is set to Supervisor
1144	Write access is set to Service
1145	Write access is set to Master
1146	Supervisor Password: %{0}
1147	Supervisor Password
1148	disabled;Enabled
1149	lPswd
1150	Illegal Password ! (Password must contain 6 digits with values 1,2,3 or 4)
1151	fCurrent
1152	In Progress...
1153	Are you sure?
1154	No;Yes
1155	Reset Factory: OK!
1156	Are you sure?
1157	Enter the Level value:
1158	Enter the new Conversion value:
1159	Point not correct (the table must be monotonous)
1160	Operation canceled...
1161	Enter the Point number to Edit:
1162	localEditedPoint
1163	Point number not valid!
1164	Enter the new Level value:
1165	Enter the new Conversion value:
1166	Enter Date (MM/DD/YYYY):
1167	Enter Time:
1168	Clock set to: %{0} %{1}
1169	Dynamic Precision Monitoring: < Option Activated >
1170	Dynamic Precision Monitoring: < Option NOT Activated >
1171	Activate Option?
1172	No; Yes
1173	Enter activation code:
1174	Activation code not correct!
1175	0123456789ABCDEF
1176	Gas Phase Compensation: < Option Activated >
1177	Gas Phase Compensation: < Option NOT Activated >
1178	Leak Detection: < Option Activated >
1179	Leak Detection: < Option NOT Activated >
1180	Interface: < Option Activated >
1181	Interface: < Option NOT Activated >
1182	Tank Height
1183	Stilling Well Height
1184	Stilling Well Diameter
1185	Save changes ?
1186	Installation: (Parameters Optimization)...
1187	0 %
1188	25 %
1189	50 %
1190	75 %
1191	100 %
1192	Select the unit:
1193	Scale 0%
1194	Scale 100%
1195	Delay
1196	Hystereris
1197	Outputs: (Parameters Optimization)...
1198	Dielectric Constant known ?
1199	known ; Unknown
1200	Epsilon R Product
1201	Application: (Parameters Optimization)...
1202	10 %
1203	20 %
1204	40 %
1205	60 %
1206	80 %
1207	90 %
1208	Remote Cable Length
1209	Maintenance Converter: (Parameters Optimization)...
1210	Maintenance Mechanic: (Parameters Optimization)...
1211	30 %
1212	70 %
1213	Error History have been reset!
1214	Probe Analysis data have been erased!
1215	Snapshot data have been erased!
1216	Automatic Mode, calculated value = < %{Dielct_gas_dig_value} >
1217	Manual Mode, parameter value = < %{epsilon_r_gas} >
1218	Change settings?
1219	Gas Phase Compensation?
1220	Epsilon R gas
1221	Gas Phase Compensation: Enable
1222	Gas Phase Compensation: Disable
1223	Automatic Mode, calculated value = < %{Dielectric_dig_value} >
1224	Manual Mode, parameter value = < %{epsilon_r_product} >
1225	Auto Dielectric Product Calculation?
1226	Auto Er Product Calculation: Enable
1227	Auto Er Product Calculation: Disable
1228	Relay state: CLOSE
1229	Open the relay or Quit?
1230	OPEN ; QUIT
1231	Relay state: OPEN
1232	Close the relay or Quit?
1233	CLOSE ; QUIT
1234	ERROR 100 -->
1235	ERROR 200 -->
1236	ERROR 205 -->
1237	ERROR 101 -->
1238	ERROR 102 -->
1239	ERROR 206 -->
1240	ERROR 103 -->
1241	ERROR 207 -->
1242	ERROR 208 -->
1243	ERROR 104 -->
1244	ERROR 201 -->
1245	ERROR 202 -->
1246	ERROR 210 -->
1247	ERROR 204 -->
1248	ERROR 209 -->
1249	ERROR 203 -->
1250	ERROR 108 -->
1251	ERROR 501 -->
1252	ERROR 211 -->
1253	ERROR 214 -->
1254	N= %{Hist_NumberOfError}
1255	--> T: %{ulDay} D %{ulHour} H %{ulMinute} ' %{ulSecond} ''
1256	...%{Hist_ErrorCode}...
1257	No more Error!
1258	No Error!
1259	Auto Setup?
1260	Probe Length
1261	Probe Analysis: (Parameters Optimization)...
1262	Delay
1263	Hystereris
1264	Sensor Initialization, please wait... %{TimeToWait} s
1265	Is your tank Partially filled or Empty ?
1266	Partially Filled ; Empty
1267	Flange Analysis...
1268	Flange Analysis: Success!
1269	Gas Phase Compensation Not Possible!
1270	Flange Analysis in progress... %{ProgressBarValue} %
1271	Flange Analysis: (Parameters Optimization)...
1272	Probe analysis...
1273	Probe Analysis: Success!
1274	Probe Analysis not Optimal!
1275	Probe Analysis in progress... %{ProgressBarValue} %
1276	Probe Analysis: (Parameters Optimization)...
1277	Snapshot Recording...
1278	Snapshot Recording: Success!
1279	Snapshot Recording not executed!
1280	Snapshot recording in progress... %{ProgressBarValue} %
1281	Snapshot Recording: (Parameters Optimization)...
1282	Is this value the distance to the product surface ? (Distance = %{distance_dig_value}
1283	Yes;No
1284	Auto Setup Completed!
1285	Flange Analysis?
1286	Flange Analysis Completed!
1287	Probe Analysis?
1288	Probe Analysis Completed!
1289	Snapshot Recording?
1290	Snapshot Recording Completed!
1291	Reset Leak Detection?
1292	Reset Leak Detection: Success!
1293	Reset Leak Detection Not Possible!
1294	Reset Leak Detection in progress... %{ProgressBarValue} %
1295	Reset Leak Detection Completed!
1296	Auto Offset Calculation?
1297	Automatic Offset Calcul: Success!
1298	Automatic Offset Calcul Not Possible!
1299	Automatic Offset Calcul in progress... %{ProgressBarValue} %
1300	Auto Offset Calcul. Completed!
1301	Save Factory: Success!
1302	Success!
Reference ID	String