Loading…
Name ID Label Description Type Access Class
fixfreq 40D5 Frequência fixa A value (in Hertz) that will be indicated on the frequency output for the purpose of a loop test. R/W Float 4096
max_zero 40D6 Zero time The amount of time the transmitter takes to determine its zero-flow reference point. The default zero time is 20 seconds. R/W Unsigned 12
rt_zero 40D7 Zero A value, in microseconds, representing the phase shift between velocity signals from the sensor when measuring zero flow. R/W Float 10
zero_offset_units 40D8 Zero units Units for zero offset - always microseconds. R/W Unsigned 32
rt_sigma 40D9 Std dev A unitless value which characterizes the amount of deviation between readings during an Auto Zero operation. R Float 10
fault_index 40DA Output Type R/W Index 4096
LMV_fault_timeout 40DC Fault Timeout This parameter defines the number of seconds for which all outputs will hold their last measured value prior to going to the configured fault state. The default is zero seconds. R/W Unsigned 12
ao_1_fault_code 40E0 AO1 Fault indicator Downscale: Milliamp outputs that indicate flow go to the configured limit, the frequency output equals 0 Hz. Upscale: Milliamp and frequency outputs go to the configured limit. Internal zero: Flow outputs indicate zero flow. R/W Enum 12
ao_2_fault_code 40E8 AO2 Fault indicator Downscale: Milliamp outputs that indicate flow go to the configured limit, the frequency output equals 0 Hz. Upscale: Milliamp and frequency outputs go to the configured limit. Internal zero: Flow outputs indicate zero flow. R/W Enum 12
fo_fault_code 40E4 FO Fault indicator Downscale: Milliamp outputs that indicate flow go to the configured limit, the frequency output equals 0 Hz. Upscale: Milliamp and frequency outputs go to the configured limit. Internal zero: Flow outputs indicate zero flow. R/W Enum 12
Name ID Label Description Type Access Class