Loading…
Loading…
Name | ID | Label | Description | Type | Access | Class |
---|---|---|---|---|---|---|
operatingMode | 0870 | Modo de operação 1 | Modo 1 operacional do dispositivo de campo específico- Um possível modo de operação do dispositivo de campo | R | Enum | 2049 |
extended_fld_device_status | 0807 | Extended Device Status | Provides additional Device Status information | R | BitEnum | 0 |
serial_number | 4008 | Número serial do sensor | Número de série do sensor – Unicamente indentifica o sensor do qual a representação de valor digital ou variável do dispositivo de campo é primariamente derivada. | R/W | Unsigned | 2048 |
met_direct | 4009 | Vazão direcionada | This parameter enables the user to determine whether the outputs and totalizers will indicate forward, reverse, bi-directional or absolute value flow. | R/W | Enum | 32 |
output_opt_brd | 400A | Output Opt. Brd. | This parameter represents the various types of output option boards that are available. | R | Enum | 2048 |
totctl | 400B | COntrole do totalizador | Allows the user to Reset, Stop, or Start all totalizers. NOTE - Inventory totals are NOT reset. | R/W | Enum | 4096 |
mass_flow_digital_units | 400C | Unidades de vazão de massa | Field Device Variable Unit- Engineering unit to be displayed with the Digital Value representation, Minimum Span, Upper Range Value, Lower Range Value, Lower Sensor Limit, and Upper Sensor Limit. | R/W | Enum | 32 |
mass_flow_digital_value | 400E | Mass flo | R | Float | 10 | |
mass_flow_digital_cutoff | 4010 | Corte baixo de vazão de massa | The mass flow rate below which the frequency/pulse output indicates zero flow, and below which totalizers stop counting. Cutoffs can also be configured for the mA output(s) (the AO cutoffs). An AO cutoff is active only if the process variable assigned to the output is mass flow or volume flow. | R/W | Float | 8 |
mass_flow_analog_value | 4011 | Valor analógico de vazão de massa | R/W | Float | 66 | |
Name | ID | Label | Description | Type | Access | Class |