Loading…
Name ID Label Description Type Access Class
slughi 40C1 Slug high limit A programmable high limit on density, which enables the transmitter to indicate slug flow (extremes in fluid density caused by slugs of gas or accumulation of solids in a liquid flow stream) if fluid density goes outside programmed slug flow limits. R/W Float 8
sluglo 40C2 Slug low limit A programmable low limit on density, which enables the transmitter to indicate slug flow (extremes in fluid density caused by slugs of gas or accumulation of solids in a liquid flow stream) if fluid density goes outside programmed slug flow limits. R/W Float 8
slug_duration 40C3 Slug duration A programmable time period, from 0.00 to 60.00 seconds, during which outputs representing flow hold their last measured value before indicating slug flow. R/W Float 12
flocal 40C4 FlowCal A 10-character factor that describes the sensitivity of the sensor to mass flow. The first 6 characters are the flow rate, in grams/second, per microsecond of time shift between velocity signals from the sensor. The 2nd four characters are the flow temperature coefficient. R/W ASCII 32
fcf 40C5 FCF A 10-character factor that describes the sensitivity of the sensor to mass flow. The first 6 characters are the flow rate, in grams/second, per microsecond of time shift between velocity signals from the sensor. The 2nd four characters are the flow temperature coefficient. R/W ASCII 32
sp_mass 40C6 Base mass unit A standard engineering unit that serves as the mass component in a special unit. R/W Enum 32
sp_mass_time 40C7 Base mass time A standard unit of time (seconds, minutes, hours, or days) that serves as the time component in a special unit. R/W Enum 32
sp_mass_fact 40C8 Mass flo conv factr A programmable divider for the base mass unit in a special unit. R/W Float 32
sp_mass_rate_text 40C9 Mass flo text A 1 to 8 character description of a special unit of flow. R/W ASCII 2048
sp_mass_total_text 40CA Mass totl text A 1 to 8 character description of a special unit of mass, which is based on the special unit of flow to represent total. R/W ASCII 2048
Name ID Label Description Type Access Class