Loading…
Name ID Label Description Type Access Class
temp_comp_mode 404E Temperature Compensation Mode Selects whether the temperature compensation is automatic (On) or manual (Fixed). Note that Fixed is based on a fixed temperature of 20 degrees C, and will not track changes in transducer temperatures. R/W Enum 2048
temp_offset 404F Temperature Offset The difference between the transducer temperature and 20 degrees C when used for Fixed temperature compensation mode. R/W Float 2048
transducer_temp 4050 Temperature Present temperature measured at the transducer. R Float 2051
max_temp 4051 Max Temperature Maximum temperature ever measured for the transducer. R Float 2051
min_temp 4052 Min Temperature Minimum temperature ever measured for the transducer. R Float 2051
temperature_units 4053 Temperature Units R Enum 2048
reset_type 4054 Reset Type W Enum 2048
SZFault 4055 Safe Zone Fault Safe Zone Fault defines how the Analog Output will respond when the transmitter detects a level within the Safe Zone. Enable fault to ensure safe, reliable high-level readings in critical applications. If Latch 3.6 or Latch 22 is chosen, the unit will remain in alarm until it is manually cleared with the SZ Alarm Reset. R/W Enum 65
SZHeight 4056 Safe Zone Height Safe Zone Height - Enter a distance that defines a safe zone just below the Blocking Distance. If Safe Zone Fault is enabled, the transmitter will report a fault if the level rises into this zone. R/W Float 2048
echo_loss_fault 4057 Echo Loss Fault Echo Loss Fault defines how the Analog Output will respond when the transmitter detects a loss of echo exceeding the delay time. Enable fault to ensure safe, reliable high-level readings in critical applications. If Latch 3.6 or Latch 22 is chosen, the unit will remain in alarm until it is manually cleared with the SZ Alarm Reset. R/W Enum 65
Name ID Label Description Type Access Class