Loading…
Name ID Label Description Type Access Class
upper_trim_count 4027 High Trim Count R Unsigned 2048
sensor_reference 4028 Sensor Reference R Unsigned 2048
gain 4029 Gain GAIN is a factory set function designed to adjust the return pulse to the best possible signal to noise ratio. The GAIN setting will be optimized by the MT5xxx based on the entries from the BASIC SETUP menu. Increasing the GAIN setting will amplify the noise as well as the return pulse. Lowering the GAIN setting will decrease the return pulse as well as the noise. R/W Unsigned 2048
range 402A Range The RANGE setting is determined by the PROBE LENGTH. RANGE 1 is set for probes shorter than 100 feet. RANGE 2 is set for probes from 100 to 200 feet. Changing the RANGE setting will erase all factory trim settings and calibration values. Changing the RANGE setting is not recommended unless a commitment to changing the physical probe length has been made. R/W Enum 2048
shape 402B Shape The SHAPE function will be set based on the mounting configuration. Like the GAIN function it is designed to create the best signal to noise ratio from the return pulse. The SHAPE setting will determine how the signal is amplified. R/W Enum 2048
unused_flag 402C R/W Unsigned 0
level_pv 402D PV LEVEL PV is a function which allows the user to determine which variable the OUTPUT of the MT5100 will be based upon. Selections for OUTPUT are Total and Interface. Total and Interface are the actual linear measurements the MT5100 is interpreting from its configuration. Total is the top level of all liquids and Interface is the level of the lower liquid in the vessel. R/W Enum 2048
measure_mode 402E Measure Mode The MT5xxx can be used to measure Media Level or Ullage. Media Level refers to a Level Measurement from the end of the probe to the surface of the product level. Said differently, it is measuring the amount of product in the tank. 2Ullage refers to a Level Measurement from the face of the sensor to the surface of the product being measured. Said differently, it is measuring the amount of vapor space in the tank. 2Factory default the MEASURE MODE will be Media Level. Media Level = Level in the tank Ullage = vapor space in the tank R/W Enum 2048
avail_levels 402F Available Levels R Enum 2048
xmitter_status_0 4030 Device Status Bits 0 R BitEnum 3
Name ID Label Description Type Access Class