Loading…
名称 ID 标签 描述 类型 访问 分类
C4W_C_ArrayElement_6_1 4022 C5 Displays the current coefficients for density. 浮点 2048
C4W_CalibrationFactor_1 4023 Calibration factor Displays the current calibration factor for the flow rate measuring sensor. Additional information: The factory setting for the calibration factor can be found on the sensor's nameplate. 浮点 2048
C4W_Damping_ArrayElement_1_1 4024 Oscillation damping 0 Displays the current oscillation damping. Oscillation damping is an indicator for the sensor's current demand for excitation power. 浮点 2
C4W_Damping_ArrayElement_2_1 4025 Oscillation damping 1 Displays the current oscillation damping. Oscillation damping is an indicator for the sensor's current demand for excitation power. 浮点 2
C4W_DampingMax_1 4026 Maximum damping partial filled pipe det. 读/写 浮点 2048
C4W_DensityAdjustMode_1 4027 Density adjustment mode Select the density adjustment mode. Additional information: Before performing the density adjustment, the following conditions must be met: - The density adjustment must be performed under operating conditions and there must be little variation in the operating conditions. - The reference media must be gas-free or pressurized so that any gas they contain is compressed. - The reference density measurements must be performed at the temperature of the medium in the process. Otherwise the density adjustment will be inaccurate. - The correction made can be undone by selecting the "Restore original" option in the "Execute density adjustment" parameter. 枚举 2048
C4W_DensityAdjustSetValue1_1 4028 Density setpoint 1 Enter the density setpoint (1 point adjustment) or the first density setpoint (2 point adjustment). 浮点 2048
C4W_DensityAdjustSetValue2_1 4029 Density setpoint 2 Enter the second density setpoint. 浮点 2048
C4W_DensityAdjustState_1 402A Density adjustment state Shows the current state of the density adjustment 枚举 2048
C4W_DualModeActive_1 402B Multi-frequency activation Switch the dual mode of the sensor on and off 枚举 2048
名称 ID 标签 描述 类型 访问 分类