Loading…
名称 ID 标签 描述 类型 访问 分类
limit_enbl 4016 Limit Control Limit the valve travel in certain region specified by upper and lower limits. 读/写 枚举 1025
control_mode 2772 Control Mode Control the valve in either normal or reverse acting mode. 读/写 枚举 1025
flop_mode 4017 Display Mode Show %closed or %open on positioner display. 读/写 枚举 1025
digital_setpoint_mode 4018 Digital Mode When enabled, the positioner will ignore 4 to 20 mA input signal, and allows control to be applied digitaly. 读/写 枚举 1025
cutoff_mode 4019 Cutoff Mode When enabled, the positioner will apply a larger than necessary close control signal to the valve 读/写 枚举 1025
valve_type 401A Valve Type Positioner can work with linear and rotary valves. 读/写 枚举 1025
compensator_gain_setting 401B P Gain Index Proportional gain index is from 1 to 20 (with 20 is the highest). 读/写 枚举 8
compensator_derivative_gain_switch 401C D Gain Switch Derivative gain switch allows finer adjustment of the compensator derivative gain. For small valves this switch should be in the LOW position. 读/写 枚举 1024
compensator_derivative_gain_setting 401D D Gain Index Derivative gain index is from 1 to 20 (with 20 is the highest). 读/写 枚举 8
integrator_setting 401E Integral Time The integral time is the time ellapsed before the valve try to offset its steady state error when the valve does not move. In each time ellapsed, the valve corrects itself in 0.2% increment. 读/写 枚举 8
名称 ID 标签 描述 类型 访问 分类