Loading…
Loading…
名称 | ID | 标签 | 描述 | 类型 | 访问 | 分类 |
---|---|---|---|---|---|---|
setpoint_value | 4000 | Setpoint | Refers to the requested position in terms of percent. | 读 | 浮点 | 10 |
position_value | 4001 | Position | Refers to the actual valve position in terms of percent. | 读 | 浮点 | 10 |
pressure_value | 138E | Pressure | Refers to the output pressure of OUT 1 of the positioner in terms of percent. | 读 | 浮点 | 10 |
setpoint_units | 4002 | Setpoint Units | 现场设备变量单位——使用数值表示、最小范围、范围上限、范围下限、传感器上限和传感器下限显示的工程单位。 | 读/写 | 枚举 | 8 |
position_units | 4003 | Position Units | 现场设备变量单位——使用数值表示、最小范围、范围上限、范围下限、传感器上限和传感器下限显示的工程单位。 | 读 | 枚举 | 8 |
pressure_units | 138D | Pressure Units | 现场设备变量单位——使用数值表示、最小范围、范围上限、范围下限、传感器上限和传感器下限显示的工程单位。 | 读 | 枚举 | 8 |
sensor_units | 4004 | Sensor Units | 现场设备变量单位——使用数值表示、最小范围、范围上限、范围下限、传感器上限和传感器下限显示的工程单位。 | 读 | 枚举 | 8 |
range_units | 4005 | 主变量范围单位 | 现场设备变量单位——使用数值表示、最小范围、范围上限、范围下限、传感器上限和传感器下限显示的工程单位。 | 读 | 枚举 | 8 |
analog_alarm_code | 4006 | 模拟量输出报警类型 | 模拟量输出报警类型——定义当现场设备检测到模拟量输出可能未跟踪关联现场设备变量时模拟量输出响应的方式。注意——数值表示可能不确定。 | 读 | 枚举 | 64 |
input_analog_value | 4007 | Input I | Refers to the requested position in terms of current in mA. | 读 | 浮点 | 66 |
名称 | ID | 标签 | 描述 | 类型 | 访问 | 分类 |