Loading…
名称 ID 标签 描述 类型 访问 分类
valve_type 401A Valve Type Positioner can work with linear and rotary valves. 读/写 枚举 1025
compensator_gain_setting 401B P Gain Index Proportional gain index is from 1 to 20 (with 20 is the highest). 读/写 枚举 8
compensator_derivative_gain_switch 401C D Gain Switch Derivative gain switch allows finer adjustment of the compensator derivative gain. For small valves this switch should be in the LOW position. 读/写 枚举 1024
compensator_derivative_gain_setting 401D D Gain Index Derivative gain index is from 1 to 20 (with 20 is the highest). 读/写 枚举 8
integrator_setting 401E Integral Time The integral time is the time ellapsed before the valve try to offset its steady state error when the valve does not move. In each time ellapsed, the valve corrects itself in 0.2% increment. 读/写 枚举 8
mode_of_calibration 401F 读/写 无符号 4096
valve_open_slew_limit 4020 Opening Speed The speed limit at which the valve opens. This index limits how fast the control input is applied to the input of the valve feedback loop when valve is opening. 读/写 枚举 8
valve_close_slew_limit 4021 Closing Speed The speed limit at which the valve closes. This index limits how fast the control input is applied to the input of the valve feedback loop when valve is closing. 读/写 枚举 8
digital_setpoint 4022 Dig.Setpt Digital Setpoint allows digital control with the percent value specified, when digital mode is enabled. 读/写 无符号 8
mA_upper_limit 4023 Setpn FS Indicates the setpoint upper limit in mA. 读/写 无符号 8
mA_lower_limit 4024 Setpn Zero Indicates the setpoint lower limit in mA. 读/写 无符号 8
IFS 4025 Max Current IFS is measured Full Scale Loop Current 读/写 浮点 8
IMN 4026 Min Current IMN is measured Minimum Loop Current 读/写 浮点 8
NFS 4027 Full scale A/D count Full scale A/D count returned by command 135 读/写 无符号 8
NMN 4028 MIN scale A/D count Minimum scale A/D count returned by command 135 写 无符号 8
mA_slope 4029 mA slope mA slope is (IFS-IMN)*2^16/(NFS-NMN) 写 无符号 8
mA_offset 402A mA offset mA offset is NFS-(IFS*2^16/mAslope) 写 整型 8
reserved_2 402B 读/写 枚举 1025
trvl_alert_enbl 402C Travel Alert When enabled, the positioner will signal alert signal when upper or lower travel limits is violated. 读/写 枚举 1025
cyc_alert_enbl 402D Cycle Alert When enabled, the positioner will signal alert signal when cycle limits is violated. 读/写 枚举 1025
acum_alert_enbl 402E Accum. Alert When enabled, the positioner will signal alert signal when accumulator limits is violated. 读/写 枚举 1025
int_ctrl_enbl 402F Integral Control When disabled, the positioner will use intrgral control to offset the steady error. 读/写 枚举 1025
dev_alert_enbl 4030 Deviation Alert When enabled, the positioner will signal alert signal when deviation limits is violated. 读/写 枚举 1025
close_limit_enbl 4031 ClsLmtSw Alert When enabled, the positioner will signal alert signal when close limit switch is on. 读/写 枚举 1025
open_limit_enbl 4032 OpnLmtSw Alert When enabled, the positioner will signal alert signal when open limit switch is on. 读/写 枚举 1025
名称 ID 标签 描述 类型 访问 分类