Loading…
名称 ID 标签 描述 类型 访问 分类
dDensityMinimumSpan 4059 Minimum Span 最小范围值——定义上限值和下限值之间允许的最小差。 读 浮点 8
dDensityFrequency 4233 Frequency Value of variable given in frequency output 读 浮点 514
dDensityFreqRange 4234 Density Frequency Limit Pulse frequency at maximum flow rate 读/写 浮点 512
dDensityFreqPercent 4235 Frequency Percent Percent of maximum flow rate 读 浮点 34
sluglo 405D Slug Low Limit A programmable low limit on density, which enables the transmitter to indicate slug flow (extremes in fluid density caused by slugs of gas or accumulation of solids in a liquid flow stream) if fluid density goes outside programmed slug flow limits. 读/写 浮点 8
slughi 405E Slug High Limit A programmable high limit on density, which enables the transmitter to indicate slug flow (extremes in fluid density caused by slugs of gas or accumulation of solids in a liquid flow stream) if fluid density goes outside programmed slug flow limits. 读/写 浮点 8
slug_delay_time 4125 Slug Delay Time The time delay between the density exceeding the slug-flow thresholds and the slug-flow error being declared. 读/写 浮点 8
cTemperatureUnits 4061 Temperature Units 现场设备变量单位——使用数值表示、最小范围、范围上限、范围下限、传感器上限和传感器下限显示的工程单位。 读/写 枚举 32
dTemperatureValue 4062 Temperature 现场设备变量值——在没有用户干扰的条件下，根据时间改变大小的数值。 读 浮点 34
dTemperatureUpperSensorLimit 4063 温度URL 传感器上限值——定义上限值的最大可用数值。 读 浮点 8
名称 ID 标签 描述 类型 访问 分类