Loading…
Loading…
方法名称: high_limit_cutoff_select_method
方法ID: 0x45FE
方法标签:
方法描述:
- {
- char S[3];
- long ids[2];
- int i;
- _set_device_status(0xFF,0);
- _set_xmtr_device_status(0xFF,0);
- _set_all_resp_code(1);
- _set_resp_code((8),0);
- send(151,S); if(_ivar_value(16804)>2) { ACKNOWLEDGE("|en|The DD revision is not compatible with the firmware in the device.\nContact your Fisher sales office for an upgrade to your DD."); return; };
- send_trans(129,0,S); _vassign(16452,16427); save_values(); if(1==_ivar_value(167)) { ACKNOWLEDGE("|en|Protection must be disabled to perform this operation."); process_abort(); } if((_ivar_value(16427))) { if(((_ivar_value(16465) & 0x01C0) == 0x0100)) { _get_dev_var_value(("|en|WARNING! Output will not track input and the SIS safety function will be disabled when Instrument Mode is Out of Service."),0,16452); } else { _get_dev_var_value(("|en|WARNING! Output will not track input when Instrument Mode is Out of Service."),0,16452); } save_values(); if(_ivar_value(16452)>0) { ACKNOWLEDGE("|en|Instrument Mode is still In Service."); process_abort(); } else { send_trans(130,6,S); } } send_trans(129,0,S); if((1==_ivar_value(16472)) || (5==_ivar_value(16472))) { if(1==_ivar_value(16472)) { ACKNOWLEDGE("|en|Access restricted\n\nInstrument was set to 'Out of Service' by a secondary master."); } else { ACKNOWLEDGE("|en|Access restricted\n\nInstrument was set to 'Out of Service' by a primary master."); } process_abort(); } _add_abort_method(17167); DELAY(1,"|en|Please wait...");
请登录以获得完整内容