Loading…
Loading…
方法名称： stroke_valve_method
方法ID： 0x4321
方法标签： Stroke Valve
方法描述：
- {
- float qa, qb, qc, qd, qe; int q, q0, q1, q2, q3; char S[3];
- int i;
- int t;
- int s;
- int z;
- int i0;
- int i1;
- int wt;
- long ids[2];
- float tvl,
- r;
- _set_device_status(0xFF,0);
- _set_xmtr_device_status(0xFF,0);
- _set_all_resp_code(1);
- _set_resp_code((8),0);
- send(151,S); if(_ivar_value(16804) > 1) { ACKNOWLEDGE("|en|The DD revision is not compatible with the firmware in the device.\nContact your Fisher sales office for an upgrade to your Device Description."); return; };
- send_trans(129,0,S); _vassign(16452,16427); save_values(); if(1==_ivar_value(167)) { ACKNOWLEDGE("|en|Protection must be disabled to perform this operation."); process_abort(); } if((_ivar_value(16427))) { if(((_ivar_value(16465) & 0x01C0) == 0x0100)) { _get_dev_var_value(("|en|WARNING! Output will not track input and the SIS safety function will be disabled when Instrument Mode is Out of Service."),0,16452); } else { _get_dev_var_value(("|en|WARNING! Output will not track input when Instrument Mode is Out of Service."),0,16452); } save_values(); if(_ivar_value(16452)>0) { ACKNOWLEDGE("|en|Instrument Mode is still In Service."); process_abort(); } else { send_trans(130,6,S); } } send_trans(129,0,S); if((1==_ivar_value(16472)) || (5==_ivar_value(16472))) { if(1==_ivar_value(16472)) { ACKNOWLEDGE("|en|Access restricted\n\nInstrument was set to 'Out of Service' by a secondary master."); } else { ACKNOWLEDGE("|en|Access restricted\n\nInstrument was set to 'Out of Service' by a primary master."); } process_abort(); } _add_abort_method(17167); DELAY(1,"|en|Please wait...");
- i = 0; send(138,S); if((_ivar_value(16789) & 0x02) > 0) { send_trans(142,0,S); send_trans(129,29,S); send_trans(142,1,S); if(0x7FA00000==_lvar_value(16940)) i=0x01; if(0x7FA00000==_lvar_value(16938)) i=i | 0x02; if(0x7FA00000==_lvar_value(16939)) i=i | 0x04; if(((i & 0x01)>0) && ((_ivar_value(16465) & 0x0200) == 0x0200)) { ACKNOWLEDGE("|en|Supply Pressure Sensor Failure occurred"); } if((i & 0x02)>0) { ACKNOWLEDGE("|en|Pressure A Sensor Failure occurred"); } if((i & 0x04)>0) { ACKNOWLEDGE("|en|Pressure B Sensor Failure occurred"); } } switch(_ivar_value(16434)) { case 7: qb=0.689; qd=0.1; break; case 12: qb=68.9; qd=10.0; break; case 10: qb=0.703; qd=0.1; break; default: qb=10.0; qd=5.0; break; } if(!(i & 0x01)) { qa = _fvar_value(16947); _fassign(16947,((qb * 15.0))); send_trans(130,88,S); send(42,S); send_trans(142,0,S); send_trans(129,28,S); q=0; while ((_fvar_value(16439)
- send(138,S); q0 = 0; q1 = 1; while((_ivar_value(16792) & 0x08) > 0) { if(1 == q1) { send_trans(129,34,S); if((1 == _ivar_value(16464)) && ((_ivar_value(16794)) & 0x08)) { q0 = SELECT_FROM_LIST("|en|The Auxiliary Terminal Action is configured for a connected local control panel, but no local control panel is detected. You will need to correct the Auxiliary Terminal Action configuration or exit and fix the connected local control panel.","|en|Change Configuration;Exit"); if(0 == q0) { q == SELECT_FROM_LIST("|en|Aux Terminal Action","|en|Disabled;PST Diagnostic"); _iassign(16464,((2 * q))); send_trans(130,86,S); } } } if(0 == q0) { q0 = SELECT_FROM_LIST("|en|Instrument is locked in safety and must be unlocked before proceeding.\nWARNING! Unlocking the device may cause the valve to move.","|en|Unlock;Exit"); } if(1 == q0) { remove_all_abort(); _add_abort_method(17167); process_abort(); } if(1 == q1) { q2 = _ivar_value(16529); if(2 == q2) q2 = -1; q2 = q2 * ((-2 * _ivar_value(16508)) + 1); if(0 == 0) { if((_ivar_value(171) == 0)) { if(2 == _ivar_value(16529)) { qa = 0.0; } else { qa = 1.0; } _fassign(16640,(qa)); send_trans(130,78,S); } _iassign(16452,(1)); save_values(); send_trans(130,6,S); } } if((_ivar_value(171) == 0)) { if(1 == q1) { q1 = 2; _fassign(16405,((qa * 100.0))); save_values(); send_trans(130,4,S); } if(1 == _ivar_value(16464)) { ACKNOWLEDGE("|en|To unlock the device, press the button next to GREEN light on Local Control Panel for more than 1/2 second."); } else { ACKNOWLEDGE("|en|To unlock the device, short the Aux. terminals between 3 and 5 seconds."); } } else { if(1 == _ivar_value(16464)) { if(q2 < 0) { ACKNOWLEDGE("|en|To unlock the device\n1. Set the input current to 8 mA if the Local Control Panel is loop powered or 4 mA if the LCP has a seperate power supply.\n2. Press the button next to GREEN light on Local Control Panel for more than 1/2 second."); } else { ACKNOWLEDGE("|en|To unlock the device\n1. Set the input current to 20 mA.\n2. Press the button next to GREEN light on Local Control Panel for more than 1/2 second."); } } else { if(q2 < 0) { ACKNOWLEDGE("|en|To unlock the device\n1. Set the input current to 4 mA.\n2. Short the Aux. terminals between 3 and 5 seconds."); } else { ACKNOWLEDGE("|en|To unlock the device\n1. Set the input current to 20 mA.\n2. Press the button next to GREEN light on Local Control Panel for more than 1/2 second."); } } } send(138,S); } if(0 == 0) { _iassign(16452,(0)); save_values(); send_trans(130,6,S); send_trans(129,0,S); };
- if(((_ivar_value(16496) & 0x01) > 0)) { if((_ivar_value(171) == 0)) { ACKNOWLEDGE("|en|The Hardware Shutdown DIP switch on the main electronics board must be Disabled to operate in multidrop mode."); process_abort(); } else { send(3,S); if((3 == _ivar_value(16496))) { while (_fvar_value(16418) > 9.0) { if(select_from_list("|en|Adjust the Analog Input current to move the valve to its normal (not tripped) position.", ids,"|en|Adjust Analog Input and continue;Exit")) { process_abort(); } send(3,S); } } if((1 == _ivar_value(16496))) { while (_fvar_value(16418) < 15.0) { if(select_from_list("|en|Adjust the Analog Input current to move the valve to its normal (not tripped) position.", ids,"|en|Adjust Analog Input and continue;Exit")) { process_abort(); } send(3,S); } } } } else { send(138,S); if((_ivar_value(171) > 0)) { send(3,S); while (_fvar_value(16418) < 3.8) { if(select_from_list("|en|Input must exceed 3.8 mA (7.8 mA if loop powered local control panel is attached.)", ids,"|en|Adjust Analog Input and continue;Exit")) { process_abort(); } send(3,S); } }; };
请登录以获得完整内容