Loading…
Loading…
| Name | ID | Label | Description | Type | Source |
|---|---|---|---|---|---|
| sensor_setup_meth | 410C | Sensor Selection | This selection must be made to enable calibration parameters to be visible for the selected sensor type. | msrc_UNKNOWN | Details |
| set_chanb | 419B | Freq/DO Setup | This function will allow the user to setup channel B to act as a frequency output or a discrete output. The appropriate configuration parameters will be displayed to the user once this selection has been made. | msrc_UNKNOWN | Details |
| mmi_auto_zero | 411E | Perform Auto Zero | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| dencal_a | 4129 | First Point | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| dencal_b | 412A | Second Point | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| dencal_c | 412B | Third Point | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| dencal_d | 412C | Fourth Point | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| dencal_fd | 412D | Flowing Density | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| temp_offset_cal | 4146 | Perform Cal | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| temp_slope_cal | 4147 | Perform Cal | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| fix_do_1 | 41DD | Discrete Output Test | Outputs a user-programmed discrete state to the discrete output. | msrc_UNKNOWN | Details |
| leave_fixed_do1_mode | 41EC | Exits fixed mode and returns the discrete output to its active state. | msrc_UNKNOWN | Details | |
| fix_frequency | 4108 | Frequency Output Test | Outputs a user-programmed frequency to the frequency output. | msrc_UNKNOWN | Details |
| fix_ao_1 | 4107 | mA Output Loop Test | Fix Analog Output- Allows the User to manually manipulate a selected Analog Output to a selected constant output value | msrc_UNKNOWN | Details |
| analog_1_trim | 40EE | mA Output Trim | Digital to Analog Trim- Allows the calibration of a selected Analog Output with an external reference at the operating endpoints of the Analog Output | msrc_UNKNOWN | Details |
| api_setup | 41EB | Petroleum Measurement Setup | This method will step the user through setting up the API parameters. | msrc_UNKNOWN | Details |
| self_test | 4106 | Self test | Instructs transmitter to perform internal self test. | msrc_UNKNOWN | Details |
| start_total | 40FB | Start | Enables the internal totalizers to begin counting. | msrc_UNKNOWN | Details |
| stop_total | 40FC | Stop | Prevents the internal totalizers from counting. | msrc_UNKNOWN | Details |
| reset_all_total | 40FD | Reset All | Resets internal totalizers. | msrc_UNKNOWN | Details |
| reset_mass_total | 40FE | Reset Total | Resets internal totalizers. | msrc_UNKNOWN | Details |
| reset_vol_total | 40FF | Reset Total | Resets internal totalizers. | msrc_UNKNOWN | Details |
| alarm1_stat | 411C | Status Event1 | When set, indicates that Event 1 has reached its programmed setpoint. | msrc_UNKNOWN | Details |
| alarm2_stat | 411D | Status Event2 | When set, indicates that Event 2 has reached its programmed setpoint. | msrc_UNKNOWN | Details |
| do1_stat | 419A | Status DO1 | When set, indicates that DO 1 has been triggered. | msrc_UNKNOWN | Details |
| view_xmtr_status | 40E9 | View status | Reports any currently active device status information. | msrc_UNKNOWN | Details |
| abort_auto_zero | 4144 | Aborts Auto Zero operation and continues to use previous zero offset value. | msrc_UNKNOWN | Details | |
| leave_fixed_freq_mode | 4148 | Exits fixed mode and returns the frequency output to its active state. | msrc_UNKNOWN | Details | |
| mmi_leave_analog_fixed_current_mode1 | 4149 | Leaving fixed crnt mode | Leaving Fixed Current Mode- Takes the selected Analog Output out of a mode where the output was a constant value, and returns the output to a mode where the output then tracks the input | msrc_UNKNOWN | Details |
| abort_send | 4145 | msrc_UNKNOWN | Details | ||
| must_send_fault_level | 41D0 | Edit Warning | msrc_UNKNOWN | Details | |
| must_send_pv | 4001 | Edit Warning | msrc_UNKNOWN | Details | |
| must_send_sv | 414A | Edit Warning | msrc_UNKNOWN | Details | |
| must_send_tv | 4004 | Edit Warning | msrc_UNKNOWN | Details | |
| must_send_event_var | 414B | Edit Warning | msrc_UNKNOWN | Details | |
| must_send_units | 4008 | Edit Warning | msrc_UNKNOWN | Details | |
| must_send_scaling | 4079 | Edit Warning | msrc_UNKNOWN | Details | |
| read_modbus_register | 4461 | Read Modbus Data | msrc_UNKNOWN | Details | |
| write_modbus_register | 4462 | Write Modbus Data | msrc_UNKNOWN | Details | |
| write_alarm_severity_meth | 4412 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| meth_view_alert_severity | 4721 | View Alert Severity | msrc_UNKNOWN | Details | |
| read_alarm_severity_meth | 4413 | Read Severity | Reports the severity level of the selected alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| review_alarm_severity_meth | 4414 | Review Severity (All) | Reports the severity level of all the alarms. | msrc_UNKNOWN | Details |
| select_acknowledge_alarm | 4415 | Acknowledge the selected alarm | msrc_UNKNOWN | Details | |
| refresh_alarm_history | 4417 | Refresh Alarm Event Log | Uploads the 50 alarm history records from the device. This method takes approximately 30 sec to run. | msrc_UNKNOWN | Details |
| perform_varDiagnostic_Action_Code | 43FF | Perform Diagnostic Action | msrc_UNKNOWN | Details | |
| write_discrete_assignment_meth | 444A | Assign Discrete Action | Assigns a discrete to an action. Select none for no discrete assignment. | msrc_UNKNOWN | Details |
| read_discrete_assignment_meth | 444B | Read Discrete Action Assignment | For a selected discrete action, reports the associated discrete assignment. | msrc_UNKNOWN | Details |
| review_discrete_assignment_meth | 444C | Review All Discrete Actions | Cycles through the discrete actions and reports the associated discrete assignments. | msrc_UNKNOWN | Details |
| write_simulation_params_massflow | 444D | Simulate Mass Flow Rate | msrc_UNKNOWN | Details | |
| write_simulation_params_temp | 444E | Simulate Temperature | msrc_UNKNOWN | Details | |
| write_simulation_params_Density | 444F | Simulate Density | msrc_UNKNOWN | Details | |
| meth_meter_verification | 4409 | Meter Verification | Starts meter verification and shows the result PASS or FAIL. This procedure takes upto 4 minutes. | msrc_UNKNOWN | Details |
| reset_ed_net_mass_total | 4406 | Reset Total | Resets internal totalizers ED Net Mass Total. | msrc_UNKNOWN | Details |
| reset_ed_net_vol_total | 4407 | Reset Total | Resets internal totalizers for ED Net Volume Total. | msrc_UNKNOWN | Details |
| reset_gas_std_vol_total | 4408 | Reset Total | Resets internal totalizers for Gas Standard Volume Total. | msrc_UNKNOWN | Details |
| reset_api_ref_vol_total | 4404 | Reset Total | Resets internal totalizers for API Reference (Standard) Volume Total | msrc_UNKNOWN | Details |
| reset_ed_ref_corr_vol_total | 4405 | Reset Total | Resets internal totalizers for ED Reference (Corrected) Volume Total. | msrc_UNKNOWN | Details |
| pc1_stat | 4480 | Stato | When set, indicates that the Discrete Event has reached its programmed trigger point. | msrc_UNKNOWN | Details |
| pc2_stat | 4481 | Stato | When set, indicates that the Discrete Event has reached its programmed trigger point. | msrc_UNKNOWN | Details |
| pc3_stat | 4482 | Stato | When set, indicates that the Discrete Event has reached its programmed trigger point. | msrc_UNKNOWN | Details |
| pc4_stat | 4483 | Stato | When set, indicates that the Discrete Event has reached its programmed trigger point. | msrc_UNKNOWN | Details |
| pc5_stat | 4484 | Stato | When set, indicates that the Discrete Event has reached its programmed trigger point. | msrc_UNKNOWN | Details |
| convert_To_Percent | 4564 | msrc_UNKNOWN | Details | ||
| convert_From_Percent | 4565 | msrc_UNKNOWN | Details | ||
| display_DD_build_number | 4722 | HART DD Information | msrc_UNKNOWN | Details | |
| method_primary_purpose_variable_small_screen | 4F56 | Primary Purpose Variables | msrc_UNKNOWN | Details | |
| method_primary_purpose_variable_gsv_small_screen | 4F57 | Primary Purpose Variables | msrc_UNKNOWN | Details | |
| method_refresh_alerts_small_screen | 4F58 | Refresh Alerts | msrc_UNKNOWN | Details | |
| method_device_status_small_screen | 4F59 | Device Status: Good | msrc_UNKNOWN | Details | |
| meth_burst_mode_small_screen | 4F5A | msrc_UNKNOWN | Details | ||
| method_variable_summary_small_screen | 4F5B | Variable Summary | msrc_UNKNOWN | Details | |
| method_variable_summary_gsv_small_screen | 4F5C | Variable Summary | msrc_UNKNOWN | Details | |
| method_variable_summary_PM_small_screen | 4F5D | Variable Summary- PM | msrc_UNKNOWN | Details | |
| method_variable_summary_CM_small_screen | 4F5E | Variable Summary- CM | msrc_UNKNOWN | Details | |
| write_simulation_params_massflow_small_screen | 4F5F | Simulate Mass Flow Rate | msrc_UNKNOWN | Details | |
| write_simulation_params_temp_small_screen | 4F60 | Simulate Temperature | msrc_UNKNOWN | Details | |
| write_simulation_params_Density_small_screen | 4F61 | Simulate Density | msrc_UNKNOWN | Details | |
| perform_ack_all | 46FA | Acknowledge All Alerts | msrc_UNKNOWN | Details | |
| set_totalizer_reset_option | 46F6 | Set Totalizer Reset Option | msrc_UNKNOWN | Details | |
| reset_config_changed_flag | 46FB | Reset Configuration Changed Flag | msrc_UNKNOWN | Details | |
| perform_factory_zero | 46EC | Restore Factory Zero | msrc_UNKNOWN | Details | |
| method_special_units | 46FC | Special Units | msrc_UNKNOWN | Details | |
| method_external_compensation | 46FF | External Pressure/Temperature | msrc_UNKNOWN | Details | |
| method_GSV_setup | 4701 | Gas Standard Volume | msrc_UNKNOWN | Details | |
| method_display_variables | 4702 | Display Variables | msrc_UNKNOWN | Details | |
| meth_setup_rs485_port | 4717 | Communications | msrc_UNKNOWN | Details | |
| meth_setup_channels | 471B | Channels | msrc_UNKNOWN | Details | |
| meth_setup_fo_output | 471D | Frequency Output | msrc_UNKNOWN | Details | |
| meth_setup_do_output | 471E | Discrete Output | msrc_UNKNOWN | Details | |
| meth_map_variables | 471F | Variable Mapping | msrc_UNKNOWN | Details | |
| set_FO_scaling | 46F7 | Set Frequency Output Scaling | msrc_UNKNOWN | Details | |
| method_setup_burst | 467D | Set Up Burst Mode | msrc_UNKNOWN | Details | |
| meth_characterize_sensor | 4706 | Sensor | msrc_UNKNOWN | Details | |
| meth_setup_mA_output | 471C | mA Output | msrc_UNKNOWN | Details | |
| meth_configure_i_o | 4709 | Inputs/Outputs | msrc_UNKNOWN | Details | |
| write_alarm_severity_meth_a003 | 47AA | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a005 | 47AB | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a006 | 47AC | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a008 | 47AD | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a009 | 47AE | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a011 | 47AF | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a012 | 47B0 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a013 | 47B1 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a016 | 47B2 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a017 | 47B3 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a018 | 47B4 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a020 | 47B5 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a033 | 47B6 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a034 | 4B4E | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a035 | 4B4F | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a100 | 47B7 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a101 | 47B8 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a102 | 47B9 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a103 | 47BA | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a104 | 47BB | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a105 | 47BC | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a106 | 47BD | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a107 | 47BE | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a108 | 47BF | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a109 | 47C0 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a110 | 47C1 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a111 | 47C2 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a115 | 47C3 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a116 | 47C4 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a117 | 47C5 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a118 | 47C6 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a119 | 4B50 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a121 | 47C7 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a131 | 47C8 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a132 | 47C9 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| method_alert_a001 | 4C00 | A001: EEPROM Error (Core Processor) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a001 | 4C01 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a002 | 4C02 | A002: RAM Error (Core Processor) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a002 | 4C03 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a003_800 | 4C04 | A003: No Sensor Response | msrc_UNKNOWN | Details | |
| method_alert_a003_700 | 4C05 | A003: No Sensor Response | msrc_UNKNOWN | Details | |
| method_add_info_alert_a003 | 472F | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a004 | 4730 | A004: Temperature Overrange | msrc_UNKNOWN | Details | |
| method_add_info_alert_a004 | 4731 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a005 | 4732 | A005: Mass Flow Rate Overrange | msrc_UNKNOWN | Details | |
| method_add_info_alert_a005 | 4733 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_Curved_tube_a006 | 4734 | A006: Characterization Required | msrc_UNKNOWN | Details | |
| method_add_info_alert_Curved_tube_a006 | 4735 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_T_series_a006 | 4736 | A006: Characterization Required | msrc_UNKNOWN | Details | |
| method_add_info_alert_T_series_a006 | 4737 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a008 | 4738 | A008: Density Overrange | msrc_UNKNOWN | Details | |
| method_add_info_alert_a008 | 4739 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a009 | 473A | A009: Transmitter Initializing/Warming Up | msrc_UNKNOWN | Details | |
| method_alert_a009_700 | 4C06 | A009: Transmitter Initializing/Warming Up | msrc_UNKNOWN | Details | |
| method_add_info_alert_a009 | 473B | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a010 | 473C | A010: Calibration Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a010 | 473D | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a011 | 473E | A011: Zero Calibration Failed: Low | msrc_UNKNOWN | Details | |
| method_add_info_alert_a011 | 473F | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a012 | 4740 | A012: Zero Calibration Failed: High | msrc_UNKNOWN | Details | |
| method_add_info_alert_a012 | 4741 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a013 | 4742 | A013: Zero Calibration Failed: Unstable | msrc_UNKNOWN | Details | |
| method_add_info_alert_a013 | 4743 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a014 | 4744 | A014: Transmitter Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a014 | 4745 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a016 | 4746 | A016: Sensor RTD Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a016 | 4747 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a017 | 4748 | A017: T-Series RTD Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a017 | 4749 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a018 | 474A | A018: EEPROM Error (Transmitter) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a018 | 474B | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a019 | 474C | A019: RAM Error (Transmitter) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a019 | 474D | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_Curved_tube_a020 | 474E | A020: No Flow Calibration Value | msrc_UNKNOWN | Details | |
| method_add_info_alert_Curved_tube_a020 | 474F | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_T_series_a020 | 4750 | A020: No Flow Calibration Value | msrc_UNKNOWN | Details | |
| method_add_info_alert_T_series_a020 | 4751 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a021 | 4752 | A021: No K1 Value | msrc_UNKNOWN | Details | |
| method_add_info_alert_a021 | 4753 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a022 | 4754 | A022: Configuration Database Corrupt (Core Processor) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a022 | 4755 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a023 | 4756 | A023: Internal Totals Corrupt (Core Processor) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a023 | 4757 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a024 | 4758 | A024: Program Corrupt (Core Processor) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a024 | 4759 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a025 | 475A | A025: Boot Sector Fault (Core Processor) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a025 | 475B | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a026 | 475C | A026: Sensor/Transmitter Communications Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a026 | 475D | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a027 | 475E | A027: Security Breach | msrc_UNKNOWN | Details | |
| method_add_info_alert_a027 | 475F | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a028 | 4760 | A028: Core Processor Write Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a028 | 4761 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a029 | 4C07 | A029: PIC/Daughterboard Communication Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a029 | 4C08 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a030 | 4C09 | A030: Incorrect Board Type | msrc_UNKNOWN | Details | |
| method_add_info_alert_a030 | 4C0A | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a031 | 4762 | A031: Low Power | msrc_UNKNOWN | Details | |
| method_add_info_alert_a031 | 4763 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a032 | 4764 | A032: Meter Verification in Progress: Outputs to Fault | msrc_UNKNOWN | Details | |
| method_alert_a032_online | 4B51 | A032: Outputs Fixed During Meter Verification | msrc_UNKNOWN | Details | |
| method_add_info_alert_a032 | 4765 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a033 | 4766 | A033: No Right/Left Pickoff Signal | msrc_UNKNOWN | Details | |
| method_add_info_alert_a033 | 4767 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a034 | 4B52 | A034: Meter Verification Failed | msrc_UNKNOWN | Details | |
| method_add_info_alert_a034 | 4B53 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a035 | 4B54 | A035: Meter Verification Aborted | msrc_UNKNOWN | Details | |
| method_add_info_alert_a035 | 4B55 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a100 | 4768 | A100: mA Output Saturated | msrc_UNKNOWN | Details | |
| method_add_info_alert_a100 | 4769 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a101 | 476A | A101: mA Output Fixed | msrc_UNKNOWN | Details | |
| method_add_info_alert_a101 | 476B | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a102 | 476C | A102: Drive Overrange | msrc_UNKNOWN | Details | |
| method_add_info_alert_a102 | 476D | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a103 | 476E | A103: Data Loss Possible (Totals and Inventories) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a103 | 476F | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a104 | 4770 | A104: Calibration in Progress | msrc_UNKNOWN | Details | |
| method_add_info_alert_a104 | 4771 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a105 | 4772 | A105: Two-Phase Flow | msrc_UNKNOWN | Details | |
| method_add_info_alert_a105 | 4773 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a106 | 4774 | A106: Burst Mode Enabled | msrc_UNKNOWN | Details | |
| method_add_info_alert_a106 | 4775 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a107 | 4776 | A107: Power Reset Occurred | msrc_UNKNOWN | Details | |
| method_add_info_alert_a107 | 4777 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a108 | 4778 | A108: Single-Setpoint Event 1 ON | msrc_UNKNOWN | Details | |
| method_add_info_alert_a108 | 4779 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a109 | 477A | A109: Single-Setpoint Event 2 ON | msrc_UNKNOWN | Details | |
| method_add_info_alert_a109 | 477B | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a110 | 477C | A110: Frequency Output Saturated | msrc_UNKNOWN | Details | |
| method_add_info_alert_a110 | 477D | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a111 | 477E | A111: Frequency Output Fixed | msrc_UNKNOWN | Details | |
| method_add_info_alert_a111 | 477F | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a115 | 4780 | A115: No External Input or Polled Data | msrc_UNKNOWN | Details | |
| method_add_info_alert_a115 | 4781 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a116 | 4782 | A116: Temperature Overrange (Petroleum Measurement) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a116 | 4783 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a117 | 4784 | A117: Density Overrange (Petroleum Measurement) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a117 | 4785 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a118 | 4786 | A: Discrete Output Fixed | msrc_UNKNOWN | Details | |
| method_add_info_alert_a118 | 4787 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a120 | 4788 | A120: Curve Fit Failure (Concentration Measurement) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a120 | 4789 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a121 | 478A | A121: Extrapolation Alert (Concentration Measurement) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a121 | 478B | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a131 | 478C | A131: Meter Verification in Progress: Outputs to Last Measured Value | msrc_UNKNOWN | Details | |
| method_alert_a131_online | 4B56 | A131: Meter Verification in Progress | msrc_UNKNOWN | Details | |
| method_add_info_alert_a131 | 478D | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_a132 | 478E | A132: Sensor Simulation Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_a132 | 478F | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_discrete_event_1_active | 4790 | Discrete Event 1 Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_event_1_active | 4791 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_discrete_event_2_active | 4792 | Discrete Event 2 Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_event_2_active | 4793 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_discrete_event_3_active | 4794 | Discrete Event 3 Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_event_3_active | 4795 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_discrete_event_4_active | 4796 | Discrete Event 4 Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_event_4_active | 4797 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_discrete_event_5_active | 4798 | Discrete Event 5 Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_event_5_active | 4799 | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_discrete_input_active | 479A | Discrete Input Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_input_active | 479B | Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_pv_out_of_limits | 479C | Primary Variable Out of Limits | msrc_UNKNOWN | Details | |
| method_add_info_alert_pv_out_of_limits | 479D | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_non_pv_out_of_limits | 479E | Non-Primary Variable Out of Limits | msrc_UNKNOWN | Details | |
| method_add_info_alert_non_pv_out_of_limits | 479F | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_pv_mA_output_saturated | 47A0 | Primary Variable mA Output Saturated | msrc_UNKNOWN | Details | |
| method_add_info_alert_pv_mA_output_saturated | 47A1 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_pv_mA_output_fixed | 47A2 | Primary Variable mA Output Fixed | msrc_UNKNOWN | Details | |
| method_add_info_alert_pv_mA_output_fixed | 47A3 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_cold_start | 47A4 | Cold Start | msrc_UNKNOWN | Details | |
| method_add_info_alert_cold_start | 47A5 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_config_changed | 47A6 | Configuration Changed | msrc_UNKNOWN | Details | |
| method_add_info_alert_config_changed | 47A7 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| method_alert_device_malfunction | 47A8 | Field Device Malfunction | msrc_UNKNOWN | Details | |
| method_add_info_alert_device_malfunction | 47A9 | No Additional Information for Above | msrc_UNKNOWN | Details | |
| meth_meter_verification_online | 4B57 | Start | Starts meter verification and shows the result PASS or FAIL or ABORT. This procedure takes upto 4 minutes. | msrc_UNKNOWN | Details |
| abort_meter_verification | 4463 | msrc_UNKNOWN | Details | ||
| meth_meter_verification_upload_results | 4B58 | msrc_UNKNOWN | Details | ||
| method_setup_schedule | 4B59 | Setup | msrc_UNKNOWN | Details | |
| method_setup_event_trigger | 4B5B | Setup Event Trigger | msrc_UNKNOWN | Details | |
| method_show_results_table_small_screen | 4F62 | Show Results Table | msrc_UNKNOWN | Details | |
| method_turn_off_schedule_small_screen | 4F63 | Turn Off Schedule | msrc_UNKNOWN | Details | |
| method_upload_mv_results | 4B5F | Upload Results Data from Device | msrc_UNKNOWN | Details | |
| meth_show_last_20_results | 4C0B | Show Last 20 Results | msrc_UNKNOWN | Details | |
| meth_ld_optimization | 4C0C | LD Optimization | msrc_UNKNOWN | Details | |
| method_enter_matrix | 4C0D | Enter Matrix | msrc_UNKNOWN | Details | |
| meth_reset_matrix_data | 4C0F | Reset Matrix Data | msrc_UNKNOWN | Details | |
| meth_reset_matrix_data_small_screen | 4F64 | Reset Matrix Data | msrc_UNKNOWN | Details | |
| meth_enable_disable_write_protect | 4C11 | Write Protect | msrc_UNKNOWN | Details | |
| meth_enable_disable_write_protect_small_screen | 4F65 | Write Protect | msrc_UNKNOWN | Details | |
| write_alarm_severity_meth_new | 4C13 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| meth_view_alert_severity_new | 4C15 | View Alert Severity | msrc_UNKNOWN | Details | |
| method_upload_mv_results_small_screen | 4F66 | Upload Results Data from Device | msrc_UNKNOWN | Details | |
| method_squawk_flash_lcd | 4DD1 | Locate Device | msrc_UNKNOWN | Details | |
| method_squawk_flash_lcd_small_screen | 4F67 | Locate Device | msrc_UNKNOWN | Details | |
| method_advance_burst_option | 4D9D | Advanced HART Configuration | msrc_UNKNOWN | Details | |
| meth_lock_unlock_device | 4DEE | Lock/Unlock Device | Blocca/Sblocca dispositivo - Posiziona il dispositivo in posizione bloccata o sbloccata. | msrc_UNKNOWN | Details |
| restore_factory_configure | 4F68 | Restore Factory Configuration | msrc_UNKNOWN | Details | |
| meth_device_reset | 4F69 | Device Reset | Reset dispositivo - Fornisce un comando all’elettronica affinché esegua un reset Questo equivale a spegnere e riaccendere il dispositivo di campo. | msrc_UNKNOWN | Details |
| method_config_matrix | 5005 | Configure Matrix | msrc_UNKNOWN | Details | |
| method_trim_cons_measure | 5003 | Trim Concentration Measurement Process Variables | msrc_UNKNOWN | Details | |
| meth_ld_optimization_test | 5165 | LD Optimization | msrc_UNKNOWN | Details | |
| method_change_hart_revision | 5166 | Change HART Revision | Changes the universal revision of the HART interface. | msrc_UNKNOWN | Details |
| deactivate_var_simulation | 5147 | Disable Simulation | msrc_UNKNOWN | Details | |
| method_view_test_results | 5167 | Most Recent Test Results | msrc_UNKNOWN | Details | |
| reset_net_oil_flow_ref_total | 5168 | Reset Total | Resets internal totalizers. | msrc_UNKNOWN | Details |
| reset_net_oil_flow_line_total | 5169 | Reset Total | Resets internal totalizers. | msrc_UNKNOWN | Details |
| reset_net_water_flow_ref_total | 516A | Reset Total | Resets internal totalizers. | msrc_UNKNOWN | Details |
| reset_net_water_flow_line_total | 516B | Reset Total | Resets internal totalizers. | msrc_UNKNOWN | Details |
| reset_sfc_net_oil_flow_line_total | 516C | Reset Total | Resets internal totalizers. | msrc_UNKNOWN | Details |
| reset_sfc_net_oil_flow_60f_total | 516D | Reset Total | Resets internal totalizers. | msrc_UNKNOWN | Details |
| reset_sfc_volume_mix_60f_line_total | 516E | Reset Total | Resets internal totalizers. | msrc_UNKNOWN | Details |
| reset_diff_mass_total | 516F | Reset Total | Resets internal totalizers. | msrc_UNKNOWN | Details |
| reset_unreme_vol_flow_mix_line_total | 5170 | Reset Total | Resets internal totalizers. | msrc_UNKNOWN | Details |
| meth_enable_disable_write_protect_test | 5171 | Write Protect | msrc_UNKNOWN | Details | |
| method_variable_summary_FC_small_screen | 5172 | Variable Summary | msrc_UNKNOWN | Details | |
| method_variable_summary_PVR_small_screen | 5174 | Variable Summary- PVR | msrc_UNKNOWN | Details | |
| reset_tmr_mass_total | 517D | Reset Total | Resets internal totalizers. | msrc_UNKNOWN | Details |
| method_variable_summary_TMR_small_screen | 517E | Variable Summary | msrc_UNKNOWN | Details | |
| method_variable_summary_TMR_gsv_small_screen | 5180 | Variable Summary | msrc_UNKNOWN | Details | |
| method_variable_summary_TBR_small_screen | 5181 | Variable Summary- TBR | msrc_UNKNOWN | Details | |
| method_variable_summary_TBR_gsv_small_screen | 5185 | Variable Summary- TBR | msrc_UNKNOWN | Details | |
| must_send_units1 | 5186 | Edit Warning | msrc_UNKNOWN | Details | |
| method_mv_assignment | 5187 | MV Discrete Assignment | msrc_UNKNOWN | Details | |
| GetHealthStatus | 0403 | GetHealthStatus | msrc_UNKNOWN | Details | |
| warning_message | 1017 | Set loop to manual | msrc_UNKNOWN | Details | |
| transmitter_dac_trim | 1024 | D/A trim | Digital to Analog Trim- Allows the calibration of a selected Analog Output with an external reference at the operating endpoints of the Analog Output | msrc_UNKNOWN | Details |
| return_to_normal | 1016 | Aborting return to normal | msrc_UNKNOWN | Details | |
| leave_fixed_current_mode | 1003 | Leaving fixed crnt mode | Leaving Fixed Current Mode- Takes the Analog Output out of a mode where the output was a constant value, and returns the output to a mode where the output tracks the input | msrc_UNKNOWN | Details |
| Name | ID | Label | Description | Type | Source |