Loading…
Loading…
| Name | ID | Label | Description | Type | Source |
|---|---|---|---|---|---|
| sensor_setup_meth | 414F | Sensor Selection | This selection must be made to enable calibration parameters to be visible for the selected sensor type. | msrc_UNKNOWN | Details |
| set_chanc | 44FC | FO Setup | FO Setup | msrc_UNKNOWN | Details |
| mmi_auto_zero | 4164 | Perform Auto Zero | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| dencal_a | 416E | First Point Calibration | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| dencal_b | 416F | Second Point Calibration | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| dencal_c | 4170 | Third Point Calibration | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| dencal_d | 4171 | Fourth Point Calibration | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| dencal_fd | 4172 | Flowing Density Calibration | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| temp_offset_cal | 418F | Perform Cal | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| temp_slope_cal | 4190 | Perform Cal | Please refer to manual for complete calibration instructions. | msrc_UNKNOWN | Details |
| fix_do_2 | 4619 | Discrete Output Test | Outputs a user-programmed discrete state to the discrete output. | msrc_UNKNOWN | Details |
| leave_fixed_do2_mode | 461A | Exits fixed mode and returns the discrete output to its active state. | msrc_UNKNOWN | Details | |
| fix_frequency | 414A | Frequency Output Test | Outputs a user-programmed frequency to the frequency output. | msrc_UNKNOWN | Details |
| fix_ao_1 | 4149 | mA Output Loop Test | 固定ｱﾅﾛｸﾞ出力 - ﾕｰｻﾞｰが選択したｱﾅﾛｸﾞ出力を選択した値で固定出力します。 | msrc_UNKNOWN | Details |
| analog_1_trim | 414B | mA 出力ﾄﾘﾑ | D/A ﾄﾘﾑ (ﾃﾞｼﾞﾀﾙ/ｱﾅﾛｸﾞ ﾄﾘﾑ) - ｵﾍﾟﾚｰﾃｨﾝｸﾞ ｴﾝﾄﾞ ﾎﾟｲﾝﾄに対するｱﾅﾛｸﾞ出力と外部指示計とのｷｬﾘﾌﾞﾚｰｼｮﾝを行います。 | msrc_UNKNOWN | Details |
| self_test | 4148 | ｾﾙﾌ ﾃｽﾄ | Instructs transmitter to perform internal self test. | msrc_UNKNOWN | Details |
| start_total | 4143 | Start | Enables the internal totalizers to begin counting. | msrc_UNKNOWN | Details |
| stop_total | 4144 | Stop | Prevents the internal totalizers from counting. | msrc_UNKNOWN | Details |
| reset_all_total | 4145 | Reset All | Resets internal totalizers. | msrc_UNKNOWN | Details |
| reset_mass_total | 4146 | Reset Total | Resets internal totalizers. | msrc_UNKNOWN | Details |
| reset_vol_total | 4147 | Reset Total | Resets internal totalizers. | msrc_UNKNOWN | Details |
| alarm1_stat | 4162 | Status Event1 | When set, indicates that Event 1 has reached its programmed setpoint. | msrc_UNKNOWN | Details |
| alarm2_stat | 4163 | Status Event2 | When set, indicates that Event 2 has reached its programmed setpoint. | msrc_UNKNOWN | Details |
| do1_stat | 44F9 | Status DO1 | When set, indicates that DO 1 has been triggered. | msrc_UNKNOWN | Details |
| view_xmtr_status | 412B | View status | Reports any currently active device status information. | msrc_UNKNOWN | Details |
| abort_auto_zero | 418D | Aborts Auto Zero operation and continues to use previous zero offset value. | msrc_UNKNOWN | Details | |
| leave_fixed_freq_mode | 4191 | Exits fixed mode and returns the frequency output to its active state. | msrc_UNKNOWN | Details | |
| mmi_leave_analog_fixed_current_mode1 | 4192 | 固定電流ﾓｰﾄﾞを終ります | 現在の固定ﾓｰﾄﾞを終了 - 選択したｱﾅﾛｸﾞ出力を定数値のﾓｰﾄﾞから移行させ, 出力が入力に応じて変わるﾓｰﾄﾞに戻します。 | msrc_UNKNOWN | Details |
| abort_send | 418E | msrc_UNKNOWN | Details | ||
| must_send_fault_level | 40E7 | msrc_UNKNOWN | Details | ||
| must_send_pv | 4001 | msrc_UNKNOWN | Details | ||
| must_send_sv | 4003 | msrc_UNKNOWN | Details | ||
| must_send_tv | 4005 | msrc_UNKNOWN | Details | ||
| must_send_event_var | 4193 | msrc_UNKNOWN | Details | ||
| must_send_units | 400D | msrc_UNKNOWN | Details | ||
| must_send_scaling | 40D1 | msrc_UNKNOWN | Details | ||
| read_modbus_register | 43BA | Modbus ﾃﾞｰﾀの読み取り | msrc_UNKNOWN | Details | |
| write_modbus_register | 43BB | Modbus ﾃﾞｰﾀの書き込み | msrc_UNKNOWN | Details | |
| write_alarm_severity_meth | 436E | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| read_alarm_severity_meth | 436F | Read Severity | Reports the severity level of the selected alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| review_alarm_severity_meth | 4370 | Review Severity (All) | Reports the severity level of all the alarms. | msrc_UNKNOWN | Details |
| select_acknowledge_alarm | 4371 | Acknowledge the selected alarm | msrc_UNKNOWN | Details | |
| refresh_alarm_history | 4373 | Refresh Alarm Event Log | Uploads the 50 alarm history records from the device. This method takes approximately 30 sec to run. | msrc_UNKNOWN | Details |
| perform_varDiagnostic_Action_Code | 4361 | Perform Diagnostic Action | msrc_UNKNOWN | Details | |
| write_discrete_assignment_meth | 43A6 | Assign Discrete Action | Assigns a discrete to an action. Select none for no discrete assignment. | msrc_UNKNOWN | Details |
| read_discrete_assignment_meth | 43A7 | Read Discrete Action Assignment | For a selected discrete action, reports the associated discrete assignment. | msrc_UNKNOWN | Details |
| review_discrete_assignment_meth | 43A8 | Review All Discrete Actions | Cycles through the discrete actions and reports the associated discrete assignments. | msrc_UNKNOWN | Details |
| write_simulation_params_massflow | 43A9 | Simulate Mass Flow Rate | msrc_UNKNOWN | Details | |
| write_simulation_params_temp | 43AA | Simulate Temperature | msrc_UNKNOWN | Details | |
| write_simulation_params_Density | 43AB | Simulate Density | msrc_UNKNOWN | Details | |
| meth_meter_verification | 4367 | Meter Verification | Starts meter verification and shows the result PASS or FAIL. This procedure takes upto 4 minutes. | msrc_UNKNOWN | Details |
| reset_gas_std_vol_total | 4366 | Reset Total | Resets internal totalizers for Gas Standard Volume Total. | msrc_UNKNOWN | Details |
| pc1_stat | 43DA | ｽﾃｰﾀｽ | When set, indicates that the Discrete Event has reached its programmed trigger point. | msrc_UNKNOWN | Details |
| pc2_stat | 43DB | ｽﾃｰﾀｽ | When set, indicates that the Discrete Event has reached its programmed trigger point. | msrc_UNKNOWN | Details |
| pc3_stat | 43DC | ｽﾃｰﾀｽ | When set, indicates that the Discrete Event has reached its programmed trigger point. | msrc_UNKNOWN | Details |
| pc4_stat | 43DD | ｽﾃｰﾀｽ | When set, indicates that the Discrete Event has reached its programmed trigger point. | msrc_UNKNOWN | Details |
| pc5_stat | 43DE | ｽﾃｰﾀｽ | When set, indicates that the Discrete Event has reached its programmed trigger point. | msrc_UNKNOWN | Details |
| convert_To_Percent | 44B9 | msrc_UNKNOWN | Details | ||
| convert_From_Percent | 44BA | msrc_UNKNOWN | Details | ||
| perform_factory_zero | 4623 | Restore Factory Zero | msrc_UNKNOWN | Details | |
| perform_ack_all | 4624 | Acknowledge All Alerts | msrc_UNKNOWN | Details | |
| meth_view_alert_severity | 4625 | View Alert Severity | msrc_UNKNOWN | Details | |
| reset_config_changed_flag | 4626 | Reset Configuration Changed Flag | msrc_UNKNOWN | Details | |
| set_FO_scaling | 4627 | Set Frequency Output Scaling | msrc_UNKNOWN | Details | |
| method_setup_burst | 4525 | Set Up Burst Mode | msrc_UNKNOWN | Details | |
| meth_characterize_sensor | 4629 | Sensor | msrc_UNKNOWN | Details | |
| meth_configure_i_o | 462C | Inputs/Outputs | msrc_UNKNOWN | Details | |
| meth_setup_rs485_port | 4637 | Set Up RS-485 Port | msrc_UNKNOWN | Details | |
| method_special_units | 4639 | 特殊単位 | msrc_UNKNOWN | Details | |
| method_external_compensation | 463C | 外圧/外部温度 | msrc_UNKNOWN | Details | |
| method_GSV_setup | 463E | Gas Standard Volume | msrc_UNKNOWN | Details | |
| meth_setup_channels | 463F | Channels | msrc_UNKNOWN | Details | |
| meth_setup_mA_output | 4640 | mA Output | msrc_UNKNOWN | Details | |
| meth_setup_fo_output | 4641 | Frequency Output | msrc_UNKNOWN | Details | |
| meth_map_variables | 4642 | Variable Mapping | msrc_UNKNOWN | Details | |
| meth_setup_do_output | 4643 | Discrete Output | msrc_UNKNOWN | Details | |
| method_primary_purpose_variable_375 | 4644 | Primary Purpose Variables | msrc_UNKNOWN | Details | |
| method_primary_purpose_variable_gsv_375 | 4645 | Primary Purpose Variables | msrc_UNKNOWN | Details | |
| method_device_status_375 | 4646 | Device Status: Good | msrc_UNKNOWN | Details | |
| meth_burst_mode_375 | 4647 | msrc_UNKNOWN | Details | ||
| display_DD_build_number | 4648 | HART DD Information | msrc_UNKNOWN | Details | |
| method_refresh_alerts_375 | 464B | Refresh Alerts | msrc_UNKNOWN | Details | |
| method_variable_summary_375 | 464C | Variable Summary | msrc_UNKNOWN | Details | |
| method_variable_summary_gsv_375 | 464D | Variable Summary | msrc_UNKNOWN | Details | |
| write_simulation_params_massflow_375 | 464E | Simulate Mass Flow Rate | msrc_UNKNOWN | Details | |
| write_simulation_params_temp_375 | 464F | Simulate Temperature | msrc_UNKNOWN | Details | |
| write_simulation_params_Density_375 | 4650 | Simulate Density | msrc_UNKNOWN | Details | |
| write_alarm_severity_meth_a003 | 4651 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a005 | 4652 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a006 | 4653 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a008 | 4654 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a009 | 4655 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a011 | 4656 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a012 | 4657 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a013 | 4658 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a016 | 4659 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a017 | 465A | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a018 | 465B | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a020 | 465C | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a033 | 465D | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a034 | 465E | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a035 | 465F | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a100 | 4660 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a101 | 4661 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a102 | 4662 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a103 | 4663 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a104 | 4664 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a105 | 4665 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a106 | 4666 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a107 | 4667 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a108 | 4668 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a109 | 4669 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a110 | 466A | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a111 | 466B | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a115 | 466C | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a116 | 466D | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a117 | 466E | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a118 | 466F | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a119 | 4670 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a121 | 4671 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a131 | 4672 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| write_alarm_severity_meth_a132 | 4673 | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| method_alert_a001 | 4922 | A001: EEPROM Error (Core Processor) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a001 | 4923 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a002 | 4924 | A002: RAM Error (Core Processor) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a002 | 4925 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a003_800 | 4926 | A003: No Sensor Response | msrc_UNKNOWN | Details | |
| method_alert_a003_700 | 4927 | A003: No Sensor Response | msrc_UNKNOWN | Details | |
| method_add_info_alert_a003 | 4675 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_a004 | 4676 | A004: Temperature Overrange | msrc_UNKNOWN | Details | |
| method_add_info_alert_a004 | 4677 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_a005 | 4678 | A005:質量流量ｵｰﾊﾞｰ ﾚﾝｼﾞ | msrc_UNKNOWN | Details | |
| method_add_info_alert_a005 | 4679 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_Curved_tube_a006 | 467A | A006: Characterization Required | msrc_UNKNOWN | Details | |
| method_add_info_alert_Curved_tube_a006 | 467B | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_T_series_a006 | 467C | A006: Characterization Required | msrc_UNKNOWN | Details | |
| method_add_info_alert_T_series_a006 | 467D | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_a008 | 467E | A008: Density Overrange | msrc_UNKNOWN | Details | |
| method_add_info_alert_a008 | 467F | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a009 | 4680 | A009: Transmitter Initializing/Warming Up | msrc_UNKNOWN | Details | |
| method_alert_a009_700 | 4928 | A009: Transmitter Initializing/Warming Up | msrc_UNKNOWN | Details | |
| method_add_info_alert_a009 | 4681 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a010 | 4682 | A010: Calibration Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a010 | 4683 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a011 | 4684 | A011: Zero Calibration Failed: Low | msrc_UNKNOWN | Details | |
| method_add_info_alert_a011 | 4685 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a012 | 4686 | A012: Zero Calibration Failed: High | msrc_UNKNOWN | Details | |
| method_add_info_alert_a012 | 4687 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a013 | 4688 | A013: Zero Calibration Failed: Unstable | msrc_UNKNOWN | Details | |
| method_add_info_alert_a013 | 4689 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a014 | 468A | A014: Transmitter Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a014 | 468B | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a016 | 468C | A016: Sensor RTD Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a016 | 468D | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_a017 | 468E | A017: T-Series RTD Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a017 | 468F | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a018 | 4690 | A018: EEPROM Error (Transmitter) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a018 | 4691 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a019 | 4692 | A019: RAM Error (Transmitter) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a019 | 4693 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_Curved_tube_a020 | 4694 | A020: No Flow Calibration Value | msrc_UNKNOWN | Details | |
| method_add_info_alert_Curved_tube_a020 | 4695 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_T_series_a020 | 4696 | A020: No Flow Calibration Value | msrc_UNKNOWN | Details | |
| method_add_info_alert_T_series_a020 | 4697 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_a021 | 4698 | A021: No K1 Value | msrc_UNKNOWN | Details | |
| method_add_info_alert_a021 | 4699 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_a022 | 469A | A022: Configuration Database Corrupt (Core Processor) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a022 | 469B | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a023 | 469C | A023: Internal Totals Corrupt (Core Processor) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a023 | 469D | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a024 | 469E | A024: Program Corrupt (Core Processor) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a024 | 469F | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a025 | 46A0 | A025: Boot Sector Fault (Core Processor) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a025 | 46A1 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a026 | 46A2 | A026: Sensor/Transmitter Communications Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a026 | 46A3 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a027 | 46A4 | A027: Security Breach | msrc_UNKNOWN | Details | |
| method_add_info_alert_a027 | 46A5 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a028 | 46A6 | A028: Core Processor Write Failure | msrc_UNKNOWN | Details | |
| method_add_info_alert_a028 | 46A7 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a031 | 46A8 | A031: Low Power | msrc_UNKNOWN | Details | |
| method_add_info_alert_a031 | 46A9 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a032 | 46AA | A032: Meter Verification in Progress: Outputs to Fault | msrc_UNKNOWN | Details | |
| method_alert_a032_online | 46AB | A032: Outputs Fixed During Meter Verification | msrc_UNKNOWN | Details | |
| method_add_info_alert_a032 | 46AC | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a033 | 46AD | A033: No Right/Left Pickoff Signal | msrc_UNKNOWN | Details | |
| method_add_info_alert_a033 | 46AE | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a034 | 46AF | A034: Meter Verification Failed | msrc_UNKNOWN | Details | |
| method_add_info_alert_a034 | 46B0 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_a035 | 46B1 | A035: Meter Verification Aborted | msrc_UNKNOWN | Details | |
| method_add_info_alert_a035 | 46B2 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_a100 | 46B3 | A100: mA Output Saturated | msrc_UNKNOWN | Details | |
| method_add_info_alert_a100 | 46B4 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_a101 | 46B5 | A101: mA Output Fixed | msrc_UNKNOWN | Details | |
| method_add_info_alert_a101 | 46B6 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_a102 | 46B7 | A102: Drive Overrange | msrc_UNKNOWN | Details | |
| method_add_info_alert_a102 | 46B8 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a103 | 46B9 | A103: Data Loss Possible (Totals and Inventories) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a103 | 46BA | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a104 | 46BB | A104: Calibration In Progress | msrc_UNKNOWN | Details | |
| method_add_info_alert_a104 | 46BC | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a105 | 46BD | A105: Slug Flow | msrc_UNKNOWN | Details | |
| method_add_info_alert_a105 | 46BE | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_a106 | 46BF | A106: Burst Mode Enabled | msrc_UNKNOWN | Details | |
| method_add_info_alert_a106 | 46C0 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a107 | 46C1 | A107: Power Reset Occurred | msrc_UNKNOWN | Details | |
| method_add_info_alert_a107 | 46C2 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a108 | 46C3 | A108: Single-Setpoint Event 1 ON | msrc_UNKNOWN | Details | |
| method_add_info_alert_a108 | 46C4 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_a109 | 46C5 | A109: Single-Setpoint Event 2 ON | msrc_UNKNOWN | Details | |
| method_add_info_alert_a109 | 46C6 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_a110 | 46C7 | A110: Frequency Output Saturated | msrc_UNKNOWN | Details | |
| method_add_info_alert_a110 | 46C8 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_a111 | 46C9 | A111: Frequency Output Fixed | msrc_UNKNOWN | Details | |
| method_add_info_alert_a111 | 46CA | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_a113 | 46CB | A113: mA Output 2 Saturated | msrc_UNKNOWN | Details | |
| method_add_info_alert_a113 | 46CC | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a114 | 46CD | A114: mA Output 2 Fixed | msrc_UNKNOWN | Details | |
| method_add_info_alert_a114 | 46CE | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a115 | 46CF | A115: No External Input or Polled Data | msrc_UNKNOWN | Details | |
| method_add_info_alert_a115 | 46D0 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_a116 | 46D1 | A116: Temperature Overrange (Petroleum) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a116 | 46D2 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a117 | 46D3 | A117: Density Overrange (Petroleum) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a117 | 46D4 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a118 | 46D5 | A118: Discrete Output Fixed | msrc_UNKNOWN | Details | |
| method_add_info_alert_a118 | 46D6 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a119 | 46D7 | A119: Discrete Output 2 Fixed | msrc_UNKNOWN | Details | |
| method_add_info_alert_a119 | 46D8 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a120 | 46D9 | A120: Curve Fit Failure (Concentration) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a120 | 46DA | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a121 | 46DB | A121: Extrapolation Alarm (Concentration) | msrc_UNKNOWN | Details | |
| method_add_info_alert_a121 | 46DC | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a131 | 46DD | A131: Meter Verification in Progress: Outputs to Last Measured Value | msrc_UNKNOWN | Details | |
| method_alert_a131_online | 46DE | A131: Meter Verification in Progress | msrc_UNKNOWN | Details | |
| method_add_info_alert_a131 | 46DF | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_a132 | 46E0 | A132: Sensor Simulation Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_a132 | 46E1 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_discrete_event_1_active | 46E2 | Discrete Event 1 Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_event_1_active | 46E3 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_discrete_event_2_active | 46E4 | Discrete Event 2 Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_event_2_active | 46E5 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_discrete_event_3_active | 46E6 | Discrete Event 3 Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_event_3_active | 46E7 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_discrete_event_4_active | 46E8 | Discrete Event 4 Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_event_4_active | 46E9 | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_discrete_event_5_active | 46EA | Discrete Event 5 Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_event_5_active | 46EB | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_discrete_input_active | 46EC | Discrete Input Active | msrc_UNKNOWN | Details | |
| method_add_info_alert_discrete_input_active | 46ED | 上記に対する追加情報 | msrc_UNKNOWN | Details | |
| method_alert_pv_out_of_limits | 46EE | Primary Variable Out of Limits | msrc_UNKNOWN | Details | |
| method_add_info_alert_pv_out_of_limits | 46EF | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_non_pv_out_of_limits | 46F0 | Non-Primary Variable Out of Limits | msrc_UNKNOWN | Details | |
| method_add_info_alert_non_pv_out_of_limits | 46F1 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_pv_mA_output_saturated | 46F2 | Primary Variable mA Output Saturated | msrc_UNKNOWN | Details | |
| method_add_info_alert_pv_mA_output_saturated | 46F3 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_pv_mA_output_fixed | 46F4 | Primary Variable mA Output Fixed | msrc_UNKNOWN | Details | |
| method_add_info_alert_pv_mA_output_fixed | 46F5 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_cold_start | 46F6 | Cold Start | msrc_UNKNOWN | Details | |
| method_add_info_alert_cold_start | 46F7 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_config_changed | 46F8 | Configuration Changed | msrc_UNKNOWN | Details | |
| method_add_info_alert_config_changed | 46F9 | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| method_alert_device_malfunction | 46FA | Field Device Malfunction | msrc_UNKNOWN | Details | |
| method_add_info_alert_device_malfunction | 46FB | 上記に対する追加情報はありません | msrc_UNKNOWN | Details | |
| meth_meter_verification_online | 46FC | ｽﾀｰﾄ | Starts meter verification and shows the result PASS or FAIL. This procedure takes upto 4 minutes. | msrc_UNKNOWN | Details |
| abort_meter_verification | 43BC | msrc_UNKNOWN | Details | ||
| meth_meter_verification_upload_results | 46FD | msrc_UNKNOWN | Details | ||
| meth_show_last_20_results | 4929 | 最新の結果20を表示 | msrc_UNKNOWN | Details | |
| method_setup_schedule | 46FE | ｾｯﾄｱｯﾌﾟ | msrc_UNKNOWN | Details | |
| method_setup_event_trigger | 4700 | Setup Event Trigger | msrc_UNKNOWN | Details | |
| method_show_results_table_375 | 4702 | Show Results Table | msrc_UNKNOWN | Details | |
| method_turn_off_schedule_375 | 4703 | Turn Off Schedule | msrc_UNKNOWN | Details | |
| method_upload_mv_results | 4704 | Upload Results Data from Device | msrc_UNKNOWN | Details | |
| meth_ld_optimization | 492A | LD 最適化 | msrc_UNKNOWN | Details | |
| meth_communication | 492B | Communications | msrc_UNKNOWN | Details | |
| meth_enable_disable_write_protect | 492D | 書込禁止を有効/無効にして下さい | msrc_UNKNOWN | Details | |
| meth_enable_disable_write_protect_375 | 492E | 書込禁止を有効/無効にして下さい | msrc_UNKNOWN | Details | |
| write_alarm_severity_meth_new | 492F | Change Alert Severity | Allows the user to change the severity level of an alarm. The alarms are represented by their alarm number. For example, A26 is 26 and A102 is 102. | msrc_UNKNOWN | Details |
| meth_view_alert_severity_new | 4931 | View Alert Severity | msrc_UNKNOWN | Details | |
| method_upload_mv_results_375 | 4933 | Upload Results Data from Device | msrc_UNKNOWN | Details | |
| meth_device_reset | 4B24 | 機器のﾘｾｯﾄ | 機器ﾘｾｯﾄ - ﾘｾｯﾄを実行するようにｴﾚｸﾄﾛﾆｸｽに指示します。これは, ﾌｨｰﾙﾄﾞ機器の電源の切/入と等価です。 | msrc_UNKNOWN | Details |
| restore_factory_configure | 4B25 | 工場出荷時の設定に戻す | msrc_UNKNOWN | Details | |
| warning_message | 1017 | ﾙｰﾌﾟをﾏﾆｭｱﾙにします | msrc_UNKNOWN | Details | |
| scaled_dac_trim | 1005 | Scaled AO1 trim | ｽｹｰﾘﾝｸﾞ D/A ﾄﾘﾑ - ｵﾍﾟﾚｰﾃｨﾝｸﾞ ｴﾝﾄﾞ ﾎﾟｲﾝﾄに対する選択したｱﾅﾛｸﾞ出力と外部指示系とのｷｬﾘﾌﾞﾚｰｼｮﾝを行います。 | msrc_UNKNOWN | Details |
| return_to_normal | 1016 | ﾉｰﾏﾙ ﾓｰﾄﾞに戻します | msrc_UNKNOWN | Details | |
| leave_fixed_current_mode | 1003 | 固定電流ﾓｰﾄﾞを終ります | 現在の固定ﾓｰﾄﾞを終了 - ｱﾅﾛｸﾞ出力を定数値のﾓｰﾄﾞから移行させ, 出力が入力に応じて変わるﾓｰﾄﾞに戻します。 | msrc_UNKNOWN | Details |
| Name | ID | Label | Description | Type | Source |