Loading…
Loading…
| 名称 | ID | 标签 | 描述 | 类型 | 源代码 |
|---|---|---|---|---|---|
| in_service_reminder_abort | 42E9 | In Service Reminder | msrc_UNKNOWN | 详细信息 | |
| inst_mode_method | 42EA | Change Instrument Mode | Select In Service or 'Out of Service' mode. The instrument adjusts its travel as the input changes, when it is In Service. Calibration and configuration require the instrument to be 'Out of Service'. | msrc_UNKNOWN | 详细信息 |
| inst_mode_wireless_method | 457F | Change Instrument Mode | Select In Service or 'Out of Service' mode. The instrument adjusts its travel as the input changes, when it is In Service. Calibration and configuration require the instrument to be 'Out of Service'. | msrc_UNKNOWN | 详细信息 |
| config_protect_method | 42EB | Change Write Protection | Enable Protection to make calibration and setup parameters read only. Note: Removing protection requires pushing a button in the terminal box of the instrument. | msrc_UNKNOWN | 详细信息 |
| config_protect_abort | 42EC | Change Write Protection | Enable Protection to make calibration and setup parameters read only. Note: Removing protection requires pushing a button in the terminal box of the instrument. | msrc_UNKNOWN | 详细信息 |
| config_protect_wireless_method | 4580 | Change Write Protection | Enable Protection to make calibration and setup parameters read only. Note: Removing protection requires pushing a button in the terminal box of the instrument. | msrc_UNKNOWN | 详细信息 |
| ctrl_mode_method | 42ED | Change Control Mode | Select the source for the instrument setpoint. Analog = 4-20 mA loop, Digital = HART link. | msrc_UNKNOWN | 详细信息 |
| burst_mode_enable_method | 42EE | Burst Enable | msrc_UNKNOWN | 详细信息 | |
| HART_5_burst_command_method | 42EF | Burst Command | 广播选项——如果已使能广播模式，选择将被广播的变量。 | msrc_UNKNOWN | 详细信息 |
| stabilize_opt_method | 42F4 | Stabilize/Optimize | Select Decrease Response if instrument is unstable. Select Increase Response if instrument is sluggish. Decrease Response reduces tuning by one set. Increase Response raises tuning by one set. | msrc_UNKNOWN | 详细信息 |
| stabilize_opt_abort | 42F5 | Stabilize/Optimize | msrc_UNKNOWN | 详细信息 | |
| highcv_tvl_tuning | 4633 | Travel Tuning Set | Select the Tuning Set. Tuning Set M provides the fastest response and C provides the slowest response. Expert allows users to adjust Travel Proportional Gain, Travel Velocity Gain, and Travel MLFB gain. | msrc_UNKNOWN | 详细信息 |
| highcv_press_tuning | 4634 | Pressure Tuning Set | Select the Tuning Set. Tuning Set M provides the fastest response and C provides the slowest response. Expert allows users to adjust Pressure Proportional Gain, Pressure Integral Gain, and Pressure MLFB gain. | msrc_UNKNOWN | 详细信息 |
| SP_rate_open_post_edit | 45E8 | SP Rate Open post edit | msrc_UNKNOWN | 详细信息 | |
| SP_rate_close_post_edit | 45E9 | SP Rate Close post edit | msrc_UNKNOWN | 详细信息 | |
| restart_method | 42F6 | Restart Processor | Follow the prompts to restart the instrument. | msrc_UNKNOWN | 详细信息 |
| custom_char_method | 42F7 | Custom Characterization Table | Enter the Set Point values and Travel Targets for each of the 21 Custom Characterization points. Set Point values are non-characterized travel. | msrc_UNKNOWN | 详细信息 |
| run_time_method | 42F8 | Days Powered Up | msrc_UNKNOWN | 详细信息 | |
| calib_var_pre_edit | 40EA | Calibration Variable | msrc_UNKNOWN | 详细信息 | |
| stroke_valve_method | 42F9 | Stroke Valve | Select the desired method to stroke the valve. The ramp rate is set to 1.0% per second. Valid entries for the target are 0 to 100%. | msrc_UNKNOWN | 详细信息 |
| stroke_valve_abort | 42FA | Stroke Valve aborted | msrc_UNKNOWN | 详细信息 | |
| lag_time_method | 42FB | View/Edit Lag Time | msrc_UNKNOWN | 详细信息 | |
| leadlag_method | 42FC | View/Edit Lead/Lag | msrc_UNKNOWN | 详细信息 | |
| tvl_counts_method | 42FD | View Travel Counts | msrc_UNKNOWN | 详细信息 | |
| actuator_selection_method | 42FE | Actuator Selection | msrc_UNKNOWN | 详细信息 | |
| EDD_compatability_method | 42FF | Incompatible DD Revision | The DD Revision is not compatible with the firmware in this device. | msrc_UNKNOWN | 详细信息 |
| instrument_time_method | 4300 | Edit Instrument Time | Enter the date and time for the instrument. | msrc_UNKNOWN | 详细信息 |
| alert_switch_source_method | 4301 | Alert Switch Source | msrc_UNKNOWN | 详细信息 | |
| cycle_counter_method | 4302 | Edit Cycle Counts | msrc_UNKNOWN | 详细信息 | |
| tvl_accum_method | 4303 | Edit Travel Accumulator | msrc_UNKNOWN | 详细信息 | |
| polling_address_method | 4304 | Polling Address | The polling address for the instrument. If a point-to-point configuration is used, enter 0. If a multidrop configuration is used, enter 0 to 15. | msrc_UNKNOWN | 详细信息 |
| switch_HART_version_method | 4305 | Change to HART 7 | msrc_UNKNOWN | 详细信息 | |
| dd_rev_method | 4306 | DD Information | Displays the Device Type, the Device Description Revision | msrc_UNKNOWN | 详细信息 |
| low_limit_cutoff_select_method | 4635 | Selects whether the Low Limit/Cutoff is a cutoff or a limit. If set to Cutoff, then the travel target is set to -25% when the travel goes below the configured value. If set to a Limit, then the travel cannot go below the configured value. | msrc_UNKNOWN | 详细信息 | |
| high_limit_cutoff_select_method | 4636 | Selects whether the High Limit/Cutoff is a cutoff or a limit. If set to Cutoff, then the travel target is set to 125% when the travel goes above the configured value. If set to a Limit, then the travel cannot go above the configured value. | msrc_UNKNOWN | 详细信息 | |
| reset_latch_method | 4637 | Reset Latch | msrc_UNKNOWN | 详细信息 | |
| change_feedback_source_method | 4638 | Change Travel/Pressure Select | msrc_UNKNOWN | 详细信息 | |
| press_sensor_calib_method | 4307 | Pressure Sensors | Follow the prompts to calibrate the instrument Pressure Sensors. | msrc_UNKNOWN | 详细信息 |
| analog_in_calib_method | 4309 | Analog Input | Follow the prompts to calibrate the instrument analog input sensor. | msrc_UNKNOWN | 详细信息 |
| analog_in_abort | 4581 | msrc_UNKNOWN | 详细信息 | ||
| relay_adjust_method | 430A | Relay Adjust | msrc_UNKNOWN | 详细信息 | |
| aux_term_mode_method | 4582 | Edit Auxiliary Terminal Action | msrc_UNKNOWN | 详细信息 | |
| autotest_interval_method | 430C | Auto Partial Stroke Test Interval | msrc_UNKNOWN | 详细信息 | |
| zero_pwr_cond_method | 430D | Zero Power Condition | msrc_UNKNOWN | 详细信息 | |
| PST_start_point_method | 430E | PST Start Point | msrc_UNKNOWN | 详细信息 | |
| act_style_method | 430F | Actuator Style | msrc_UNKNOWN | 详细信息 | |
| relay_type_method | 4310 | Relay Type | msrc_UNKNOWN | 详细信息 | |
| loop_initiated_pst_method | 4639 | Start PST on Loop Current Trigger | msrc_UNKNOWN | 详细信息 | |
| DVC_powerup_method | 4311 | Change Reset Mode | msrc_UNKNOWN | 详细信息 | |
| reset_pst_abnormal_method | 463A | Reset PST Abnormal Alert | Allows the user to reset the PST Abnormal alert that occured during a Partial Stroke Test. | msrc_UNKNOWN | 详细信息 |
| PST_calib_method | 4583 | PST Calibration | msrc_UNKNOWN | 详细信息 | |
| PST_calib_method_FW6 | 463B | PST Calibration | msrc_UNKNOWN | 详细信息 | |
| exit_with_PST_disabled_abort | 4585 | Disable PST | msrc_UNKNOWN | 详细信息 | |
| set_PST_defaults_abort | 4586 | Exit PST Calibration | msrc_UNKNOWN | 详细信息 | |
| end_point_control_enab_method | 4313 | Change EPPC Enable | msrc_UNKNOWN | 详细信息 | |
| PST_enable_method | 4314 | Change PST Enable | Determines if the Partial Stroke test is enabled or disabled. In order for the Partial Stroke to be enabled, the Partial Stroke Start Point. (Initial Setup page) and the Travel Cutoffs (Travel Control page) must be set. | msrc_UNKNOWN | 详细信息 |
| partial_stroke_vars_method | 4315 | PST Variables | msrc_UNKNOWN | 详细信息 | |
| disable_PST_abort | 4587 | Disable PST | msrc_UNKNOWN | 详细信息 | |
| partial_stroke_test_method | 431B | Partial Stroke Test | msrc_UNKNOWN | 详细信息 | |
| partial_stroke_test_abort | 431C | PST Abort | msrc_UNKNOWN | 详细信息 | |
| calib_abort1 | 4308 | Calibration aborted. | msrc_UNKNOWN | 详细信息 | |
| calib_abort2 | 430B | Calibration aborted. | msrc_UNKNOWN | 详细信息 | |
| calib_abort3 | 463C | Calibration aborted. | msrc_UNKNOWN | 详细信息 | |
| not_calibrated_abort | 4584 | Not Calibrated | msrc_UNKNOWN | 详细信息 | |
| last_calib_time_method | 431D | Calibration Record | msrc_UNKNOWN | 详细信息 | |
| last_calib_time_abort | 4588 | Calibration Record | msrc_UNKNOWN | 详细信息 | |
| tvl_auto_calib_method | 431F | Auto Calibration | Follow the prompts to initiate automatic calibration of the Travel Sensor. | msrc_UNKNOWN | 详细信息 |
| tvl_auto_calib_abort | 431E | Auto Calibration aborted | msrc_UNKNOWN | 详细信息 | |
| write_autocal_record_abort | 4589 | Auto Calibration | msrc_UNKNOWN | 详细信息 | |
| tvl_manual_calib_method | 4320 | Manual Calibration | Follow the prompts to manually calibrate the instrument travel sensor. | msrc_UNKNOWN | 详细信息 |
| write_manual_cal_record_after_PST_abort | 458A | Manual Calibration | msrc_UNKNOWN | 详细信息 | |
| write_manual_cal_record_abort | 458B | Manual Calibration | msrc_UNKNOWN | 详细信息 | |
| find_travel_sensor_motion_SUBROUTINE | 45E2 | Device Setup | Prompts the user for pressure information and to select subsequent menu items for instrument setup. Note: All items on the Auto Setup menu must be selected in order for basic setup. | msrc_UNKNOWN | 详细信息 |
| in_service_prompt_SUBROUTINE | 4718 | Device Setup | Prompts the user for pressure information and to select subsequent menu items for instrument setup. Note: All items on the Auto Setup menu must be selected in order for basic setup. | msrc_UNKNOWN | 详细信息 |
| high_cv_tuning_SUBROUTINE | 4719 | Device Setup | Prompts the user for pressure information and to select subsequent menu items for instrument setup. Note: All items on the Auto Setup menu must be selected in order for basic setup. | msrc_UNKNOWN | 详细信息 |
| device_setup_partial_abort | 4321 | Device Setup | msrc_UNKNOWN | 详细信息 | |
| device_setup_method | 4322 | Device Setup | Prompts the user for pressure information and to select subsequent menu items for instrument setup. Note: All items on the Auto Setup menu must be selected in order for basic setup. | msrc_UNKNOWN | 详细信息 |
| electronics_alert_shutdown_method | 471A | Electronic Alerts Shutdown | Electronic Alerts Shutdown Shutdown | msrc_UNKNOWN | 详细信息 |
| sis_pst_alert_shutdown_method | 471B | SIS/Partial Stroke Alerts Shutdown | SIS/Partial Stroke Alerts Shutdown Shutdown | msrc_UNKNOWN | 详细信息 |
| pst_alert_shutdown_method | 471C | Partial Stroke Alerts Shutdown | Partial Stroke Alerts Shutdown Shutdown | msrc_UNKNOWN | 详细信息 |
| sensor_alert_shutdown_method | 471D | Sensor Alerts Shutdown | Sensor Alerts Shutdown Shutdown | msrc_UNKNOWN | 详细信息 |
| shutdown_alert_method | 471E | msrc_UNKNOWN | 详细信息 | ||
| electronics_alert_enable_method | 471F | Electronic Alerts Enable | Enable or disable the reporting of the Electronic Alerts | msrc_UNKNOWN | 详细信息 |
| environments_alert_enable_method | 4720 | Pressure Alerts Enable | Enable or disable the reporting of the Pressure Alerts | msrc_UNKNOWN | 详细信息 |
| tvl_alert_enable_method | 4721 | Travel Alerts Enable | Enable or disable the reporting of the Travel Alerts | msrc_UNKNOWN | 详细信息 |
| tvl_hist_alert_enable_method | 4722 | Travel History Alerts Enable | Enable or disable the reporting of the Travel History Alerts | msrc_UNKNOWN | 详细信息 |
| sis_pst_alert_enable_method | 4723 | SIS/Partial Stroke Alerts Enable | Enable or disable the reporting of the SIS/Partial Stroke Alerts | msrc_UNKNOWN | 详细信息 |
| pst_alert_enable_method | 4724 | Partial Stroke Alerts Enable | Enable or disable the reporting of the Partial Stroke Alerts | msrc_UNKNOWN | 详细信息 |
| sensors_alert_enable_method | 4725 | Sensor Alerts Enable | Enable or disable the reporting of the Sensor Alerts | msrc_UNKNOWN | 详细信息 |
| aer_status_alert_enable_method | 4726 | Alert Record/Status Alerts Enable | Enable or disable the reporting of the Alert Record/Status Alerts | msrc_UNKNOWN | 详细信息 |
| lcp_alert_enable_method | 4727 | Local Control Panel Alerts Enable | Enable or disable the reporting of the Local Control Panel Alerts | msrc_UNKNOWN | 详细信息 |
| enable_alert_method | 4728 | Alert Enable | msrc_UNKNOWN | 详细信息 | |
| return_lead_method | 463D | Return Lead | msrc_UNKNOWN | 详细信息 | |
| sis_alert_enable_method | 4729 | SIS Stroke Alerts Enable | Enable or disable the reporting of the SIS Stroke Alerts | msrc_UNKNOWN | 详细信息 |
| enable_SOV_SIS_alerts_method | 472A | Alert Enable | msrc_UNKNOWN | 详细信息 | |
| PSTprohibit0b0_TravelSensorFailEnable_method | 472B | Travel Sensor Failure | Enable or disable PST Prohibiting for Travel Sensor Failure | msrc_UNKNOWN | 详细信息 |
| PSTprohibit0b1_PressSensorFailEnable_method | 472C | Pressure Sensor Failure | Enable or disable PST Prohibiting for Pressure Sensor Failure | msrc_UNKNOWN | 详细信息 |
| PSTprohibit0b2_TempSensorFailEnable_method | 472D | Temp Sensor Failure | Enable or disable PST Prohibiting for Temp Sensor Failure | msrc_UNKNOWN | 详细信息 |
| PSTprohibit0b3_CriticalNVMFailEnable_method | 472E | Critical NVM Failure | Enable or disable PST Prohibiting for Critical NVM Failure | msrc_UNKNOWN | 详细信息 |
| PSTprohibit0b4_DriveCurrentFailEnable_method | 472F | Drive Current Failure | Enable or disable PST Prohibiting for Drive Current Failure | msrc_UNKNOWN | 详细信息 |
| PSTprohibit0b5_RefVoltageFailEnable_method | 4730 | Reference Voltage Failure | Enable or disable PST Prohibiting for Reference Voltage Failure | msrc_UNKNOWN | 详细信息 |
| PSTprohibit0b6_MLFBSensorFailEnable_method | 4731 | Minor Loop Sensor Failure | Enable or disable PST Prohibiting for Minor Loop Sensor Failure | msrc_UNKNOWN | 详细信息 |
| PSTprohibit0b7_FlashIntegrityEnable_method | 4732 | Flash Integrity Failure | Enable or disable PST Prohibiting for Flash Integrity Failure | msrc_UNKNOWN | 详细信息 |
| PSTprohibit1b3_PressControlActiveEnab_method | 4733 | Pressure Fallback Active | Enable or disable PST Prohibiting for Pressure Fallback Active | msrc_UNKNOWN | 详细信息 |
| PSTprohibit3b5_SupplyPressureAlertEnab_method | 4734 | Supply Pressure Lo | Enable or disable PST Prohibiting for Supply Pressure Lo | msrc_UNKNOWN | 详细信息 |
| PSTprohibit4b3_TvlDeviationAlertEnab_method | 4735 | Travel Deviation | Enable or disable PST Prohibiting for Travel Deviation | msrc_UNKNOWN | 详细信息 |
| display_alert_record_method | 4323 | View Alert Records | Displays the Alert Record. | msrc_UNKNOWN | 详细信息 |
| show_active_alerts_method | 4346 | Device Status | msrc_UNKNOWN | 详细信息 | |
| clear_alert_record_method | 4324 | Clear Records | Clears the Alert Record. | msrc_UNKNOWN | 详细信息 |
| lcp_white_light_mapping_method | 4736 | Alert Mapping to Fault Light | Enable or disable the reporting of the Alert Mapping to Fault Light | msrc_UNKNOWN | 详细信息 |
| demand_brkout_time_method | 463E | Demand Breakout Time Alert Pt | msrc_UNKNOWN | 详细信息 | |
| demand_stroke_time_method | 463F | Demand Stroke Time Alert Pt | msrc_UNKNOWN | 详细信息 | |
| reset_stroke_time_method | 4640 | Reset Stroke Time Alert Pt | msrc_UNKNOWN | 详细信息 | |
| sis_stroke_alerts_method | 4641 | msrc_UNKNOWN | 详细信息 | ||
| pst_abnormal_criteria_method | 4642 | PST Abnormal Criteria | msrc_UNKNOWN | 详细信息 | |
| pst_abort_criteria_method | 4643 | PST Abort Criteria | msrc_UNKNOWN | 详细信息 | |
| pst_result_criticality_method | 4644 | PST Result Criticality | msrc_UNKNOWN | 详细信息 | |
| pst_criteria_method | 4645 | msrc_UNKNOWN | 详细信息 | ||
| pre_send_configuration_method | 03EF | pre_send_configuration_method | msrc_UNKNOWN | 详细信息 | |
| post_send_configuration_method | 03F0 | post_send_configuration_method | msrc_UNKNOWN | 详细信息 | |
| warning_message | 1017 | 设置回路为手动 | msrc_UNKNOWN | 详细信息 | |
| 名称 | ID | 标签 | 描述 | 类型 | 源代码 |