Loading…
Loading…
| Name | ID | Label | Description | Type | Source |
|---|---|---|---|---|---|
| in_service_reminder_abort | 430F | In Service Reminder | msrc_UNKNOWN | Details | |
| inst_mode_method | 4310 | Change Instrument Mode | Select In Service or 'Out of Service' mode. The instrument adjusts its travel as the input changes, when it is In Service. Calibration and configuration require the instrument to be 'Out of Service'. | msrc_UNKNOWN | Details |
| inst_mode_wireless_method | 4311 | Change Instrument Mode | Select In Service or 'Out of Service' mode. The instrument adjusts its travel as the input changes, when it is In Service. Calibration and configuration require the instrument to be 'Out of Service'. | msrc_UNKNOWN | Details |
| config_protect_method | 4312 | Change Write Protection | Enable Protection to make calibration and setup parameters read only. Note: Removing protection requires pushing a button in the terminal box of the instrument. | msrc_UNKNOWN | Details |
| config_protect_abort | 4313 | Change Write Protection | Enable Protection to make calibration and setup parameters read only. Note: Removing protection requires pushing a button in the terminal box of the instrument. | msrc_UNKNOWN | Details |
| config_protect_wireless_method | 4314 | Change Write Protection | Enable Protection to make calibration and setup parameters read only. Note: Removing protection requires pushing a button in the terminal box of the instrument. | msrc_UNKNOWN | Details |
| ctrl_mode_method | 4315 | Change Control Mode | Select the source for the instrument setpoint. Analog = 4-20 mA loop, Digital = HART link. | msrc_UNKNOWN | Details |
| burst_mode_enable_method | 4316 | Burst Enable | msrc_UNKNOWN | Details | |
| HART_5_burst_command_method | 4317 | Burst Command | Burst Option- Selects the variable(s) that will be Bursted if Burst Mode is enabled. | msrc_UNKNOWN | Details |
| stabilize_opt_method | 431C | Stabilize/Optimize | Select Decrease Response if instrument is unstable. Select Increase Response if instrument is sluggish. Decrease Response reduces tuning by one set. Increase Response raises tuning by one set. | msrc_UNKNOWN | Details |
| stabilize_opt_abort | 431D | Stabilize/Optimize | msrc_UNKNOWN | Details | |
| highcv_tvl_tuning | 45FB | Travel Tuning Set | Select the Tuning Set. Tuning Set M provides the fastest response and C provides the slowest response. Expert allows users to adjust Travel Proportional Gain, Travel Velocity Gain, and Travel MLFB gain. | msrc_UNKNOWN | Details |
| highcv_press_tuning | 45FC | Pressure Tuning Set | Select the Tuning Set. Tuning Set M provides the fastest response and C provides the slowest response. Expert allows users to adjust Pressure Proportional Gain, Pressure Integral Gain, and Pressure MLFB gain. | msrc_UNKNOWN | Details |
| SP_rate_open_post_edit | 45AE | SP Rate Open post edit | msrc_UNKNOWN | Details | |
| SP_rate_close_post_edit | 45AF | SP Rate Close post edit | msrc_UNKNOWN | Details | |
| restart_method | 431E | Restart Processor | Follow the prompts to restart the instrument. | msrc_UNKNOWN | Details |
| custom_char_method | 431F | Custom Characterization Table | Enter the Set Point values and Travel Targets for each of the 21 Custom Characterization points. Set Point values are non-characterized travel. | msrc_UNKNOWN | Details |
| run_time_method | 4320 | Days Powered Up | msrc_UNKNOWN | Details | |
| calib_var_pre_edit | 40EA | Calibration Variable | msrc_UNKNOWN | Details | |
| stroke_valve_method | 4321 | Stroke Valve | Select the desired method to stroke the valve. The ramp rate is set to 1.0% per second. Valid entries for the target are 0 to 100%. | msrc_UNKNOWN | Details |
| stroke_valve_abort | 4322 | Stroke Valve aborted | msrc_UNKNOWN | Details | |
| lag_time_method | 4323 | View/Edit Lag Time | msrc_UNKNOWN | Details | |
| tvl_counts_method | 4324 | View Travel Counts | msrc_UNKNOWN | Details | |
| actuator_selection_method | 4325 | Actuator Selection | msrc_UNKNOWN | Details | |
| EDD_compatability_method | 4326 | Incompatible DD Revision | The DD Revision is not compatible with the firmware in this device. | msrc_UNKNOWN | Details |
| instrument_time_method | 4327 | Edit Instrument Time | Enter the date and time for the instrument. | msrc_UNKNOWN | Details |
| alert_switch_source_method | 4328 | Alert Switch Source | msrc_UNKNOWN | Details | |
| cycle_counter_method | 4329 | Edit Cycle Counts | msrc_UNKNOWN | Details | |
| tvl_accum_method | 432A | Edit Travel Accumulator | msrc_UNKNOWN | Details | |
| polling_address_method | 432B | Polling Address | The polling address for the instrument. If a point-to-point configuration is used, enter 0. If a multidrop configuration is used, enter 0 to 15. | msrc_UNKNOWN | Details |
| switch_HART_version_method | 432C | Change to HART 7 | msrc_UNKNOWN | Details | |
| dd_rev_method | 432D | DD Information | Displays the Device Type, the Device Description Revision | msrc_UNKNOWN | Details |
| low_limit_cutoff_select_method | 45FD | Selects whether the Low Limit/Cutoff is a cutoff or a limit. If set to Cutoff, then the travel target is set to -25% when the travel goes below the configured value. If set to a Limit, then the travel cannot go below the configured value. | msrc_UNKNOWN | Details | |
| high_limit_cutoff_select_method | 45FE | Selects whether the High Limit/Cutoff is a cutoff or a limit. If set to Cutoff, then the travel target is set to 125% when the travel goes above the configured value. If set to a Limit, then the travel cannot go above the configured value. | msrc_UNKNOWN | Details | |
| reset_latch_method | 45FF | Reset Latch | msrc_UNKNOWN | Details | |
| change_feedback_source_method | 4600 | Change Travel/Pressure Select | msrc_UNKNOWN | Details | |
| press_sensor_calib_method | 432E | Pressure Sensors | Follow the prompts to calibrate the instrument Pressure Sensors. | msrc_UNKNOWN | Details |
| analog_in_calib_method | 4330 | Analog Input | Follow the prompts to calibrate the instrument analog input sensor. | msrc_UNKNOWN | Details |
| analog_in_abort | 4331 | msrc_UNKNOWN | Details | ||
| relay_adjust_method | 4332 | Relay Adjust | msrc_UNKNOWN | Details | |
| aux_term_mode_method | 4334 | Edit Auxiliary Terminal Action | msrc_UNKNOWN | Details | |
| autotest_interval_method | 4335 | Auto Partial Stroke Test Interval | msrc_UNKNOWN | Details | |
| zero_pwr_cond_method | 4336 | Zero Power Condition | msrc_UNKNOWN | Details | |
| PST_start_point_method | 4337 | PST Start Point | msrc_UNKNOWN | Details | |
| act_style_method | 4338 | Actuator Style | msrc_UNKNOWN | Details | |
| relay_type_method | 4339 | Relay Type | msrc_UNKNOWN | Details | |
| loop_initiated_pst_method | 4601 | Start PST on Loop Current Trigger | msrc_UNKNOWN | Details | |
| DVC_powerup_method | 433A | Change Reset Mode | msrc_UNKNOWN | Details | |
| reset_pst_abnormal_method | 4602 | Reset PST Abnormal Alert | Allows the user to reset the PST Abnormal alert that occured during a Partial Stroke Test. | msrc_UNKNOWN | Details |
| PST_calib_method | 433C | PST Calibration | msrc_UNKNOWN | Details | |
| PST_calib_method_FW6 | 4603 | PST Calibration | msrc_UNKNOWN | Details | |
| exit_with_PST_disabled_abort | 433E | Disable PST | msrc_UNKNOWN | Details | |
| set_PST_defaults_abort | 433F | Exit PST Calibration | msrc_UNKNOWN | Details | |
| end_point_control_enab_method | 4340 | Change EPPC Enable | msrc_UNKNOWN | Details | |
| PST_enable_method | 4341 | Change PST Enable | Determines if the Partial Stroke test is enabled or disabled. In order for the Partial Stroke to be enabled, the Partial Stroke Start Point. (Initial Setup page) and the Travel Cutoffs (Travel Control page) must be set. | msrc_UNKNOWN | Details |
| partial_stroke_vars_method | 4342 | PST Variables | msrc_UNKNOWN | Details | |
| disable_PST_abort | 4343 | Disable PST | msrc_UNKNOWN | Details | |
| partial_stroke_test_method | 4344 | Partial Stroke Test | msrc_UNKNOWN | Details | |
| partial_stroke_test_abort | 4345 | PST Abort | msrc_UNKNOWN | Details | |
| calib_abort1 | 432F | Calibration aborted. | msrc_UNKNOWN | Details | |
| calib_abort2 | 4333 | Calibration aborted. | msrc_UNKNOWN | Details | |
| calib_abort3 | 4604 | Calibration aborted. | msrc_UNKNOWN | Details | |
| not_calibrated_abort | 433D | Not Calibrated | msrc_UNKNOWN | Details | |
| last_calib_time_method | 4346 | Calibration Record | msrc_UNKNOWN | Details | |
| last_calib_time_abort | 4347 | Calibration Record | msrc_UNKNOWN | Details | |
| tvl_auto_calib_method | 4348 | Auto Calibration | Follow the prompts to initiate automatic calibration of the Travel Sensor. | msrc_UNKNOWN | Details |
| tvl_auto_calib_abort | 4349 | Auto Calibration aborted | msrc_UNKNOWN | Details | |
| write_autocal_record_abort | 434A | Auto Calibration | msrc_UNKNOWN | Details | |
| tvl_manual_calib_method | 434B | Manual Calibration | Follow the prompts to manually calibrate the instrument travel sensor. | msrc_UNKNOWN | Details |
| write_manual_cal_record_after_PST_abort | 434C | Manual Calibration | msrc_UNKNOWN | Details | |
| write_manual_cal_record_abort | 434D | Manual Calibration | msrc_UNKNOWN | Details | |
| find_travel_sensor_motion_SUBROUTINE | 4537 | Device Setup | Prompts the user for pressure information and to select subsequent menu items for instrument setup. Note: All items on the Auto Setup menu must be selected in order for basic setup. | msrc_UNKNOWN | Details |
| in_service_prompt_SUBROUTINE | 46E5 | Device Setup | Prompts the user for pressure information and to select subsequent menu items for instrument setup. Note: All items on the Auto Setup menu must be selected in order for basic setup. | msrc_UNKNOWN | Details |
| high_cv_tuning_SUBROUTINE | 46E6 | Device Setup | Prompts the user for pressure information and to select subsequent menu items for instrument setup. Note: All items on the Auto Setup menu must be selected in order for basic setup. | msrc_UNKNOWN | Details |
| device_setup_partial_abort | 434E | Device Setup | msrc_UNKNOWN | Details | |
| device_setup_method | 434F | Device Setup | Prompts the user for pressure information and to select subsequent menu items for instrument setup. Note: All items on the Auto Setup menu must be selected in order for basic setup. | msrc_UNKNOWN | Details |
| electronics_alert_shutdown_method | 46E7 | Electronic Alerts Shutdown | Electronic Alerts Shutdown Shutdown | msrc_UNKNOWN | Details |
| sis_pst_alert_shutdown_method | 46E8 | SIS/Partial Stroke Alerts Shutdown | SIS/Partial Stroke Alerts Shutdown Shutdown | msrc_UNKNOWN | Details |
| pst_alert_shutdown_method | 46E9 | Partial Stroke Alerts Shutdown | Partial Stroke Alerts Shutdown Shutdown | msrc_UNKNOWN | Details |
| sensor_alert_shutdown_method | 46EA | Sensor Alerts Shutdown | Sensor Alerts Shutdown Shutdown | msrc_UNKNOWN | Details |
| shutdown_alert_method | 46EB | msrc_UNKNOWN | Details | ||
| electronics_alert_enable_method | 46EC | Electronic Alerts Enable | Enable or disable the reporting of the Electronic Alerts | msrc_UNKNOWN | Details |
| environments_alert_enable_method | 46ED | Pressure Alerts Enable | Enable or disable the reporting of the Pressure Alerts | msrc_UNKNOWN | Details |
| tvl_alert_enable_method | 46EE | Travel Alerts Enable | Enable or disable the reporting of the Travel Alerts | msrc_UNKNOWN | Details |
| tvl_hist_alert_enable_method | 46EF | Travel History Alerts Enable | Enable or disable the reporting of the Travel History Alerts | msrc_UNKNOWN | Details |
| sis_pst_alert_enable_method | 46F0 | SIS/Partial Stroke Alerts Enable | Enable or disable the reporting of the SIS/Partial Stroke Alerts | msrc_UNKNOWN | Details |
| pst_alert_enable_method | 46F1 | Partial Stroke Alerts Enable | Enable or disable the reporting of the Partial Stroke Alerts | msrc_UNKNOWN | Details |
| sensors_alert_enable_method | 46F2 | Sensor Alerts Enable | Enable or disable the reporting of the Sensor Alerts | msrc_UNKNOWN | Details |
| aer_status_alert_enable_method | 46F3 | Alert Record/Status Alerts Enable | Enable or disable the reporting of the Alert Record/Status Alerts | msrc_UNKNOWN | Details |
| lcp_alert_enable_method | 46F4 | Local Control Panel Alerts Enable | Enable or disable the reporting of the Local Control Panel Alerts | msrc_UNKNOWN | Details |
| enable_alert_method | 46F5 | Alert Enable | msrc_UNKNOWN | Details | |
| return_lead_method | 4605 | Return Lead | msrc_UNKNOWN | Details | |
| sis_alert_enable_method | 46F6 | SIS Stroke Alerts Enable | Enable or disable the reporting of the SIS Stroke Alerts | msrc_UNKNOWN | Details |
| enable_SOV_SIS_alerts_method | 46F7 | Alert Enable | msrc_UNKNOWN | Details | |
| PSTprohibit0b0_TravelSensorFailEnable_method | 46F8 | Travel Sensor Failure | Enable or disable PST Prohibiting for Travel Sensor Failure | msrc_UNKNOWN | Details |
| PSTprohibit0b1_PressSensorFailEnable_method | 46F9 | Pressure Sensor Failure | Enable or disable PST Prohibiting for Pressure Sensor Failure | msrc_UNKNOWN | Details |
| PSTprohibit0b2_TempSensorFailEnable_method | 46FA | Temp Sensor Failure | Enable or disable PST Prohibiting for Temp Sensor Failure | msrc_UNKNOWN | Details |
| PSTprohibit0b3_CriticalNVMFailEnable_method | 46FB | Critical NVM Failure | Enable or disable PST Prohibiting for Critical NVM Failure | msrc_UNKNOWN | Details |
| PSTprohibit0b4_DriveCurrentFailEnable_method | 46FC | Drive Current Failure | Enable or disable PST Prohibiting for Drive Current Failure | msrc_UNKNOWN | Details |
| PSTprohibit0b5_RefVoltageFailEnable_method | 46FD | Reference Voltage Failure | Enable or disable PST Prohibiting for Reference Voltage Failure | msrc_UNKNOWN | Details |
| PSTprohibit0b6_MLFBSensorFailEnable_method | 46FE | Minor Loop Sensor Failure | Enable or disable PST Prohibiting for Minor Loop Sensor Failure | msrc_UNKNOWN | Details |
| PSTprohibit0b7_FlashIntegrityEnable_method | 46FF | Flash Integrity Failure | Enable or disable PST Prohibiting for Flash Integrity Failure | msrc_UNKNOWN | Details |
| PSTprohibit1b3_PressControlActiveEnab_method | 4700 | Pressure Fallback Active | Enable or disable PST Prohibiting for Pressure Fallback Active | msrc_UNKNOWN | Details |
| PSTprohibit3b5_SupplyPressureAlertEnab_method | 4701 | Supply Pressure Lo | Enable or disable PST Prohibiting for Supply Pressure Lo | msrc_UNKNOWN | Details |
| PSTprohibit4b3_TvlDeviationAlertEnab_method | 4702 | Travel Deviation | Enable or disable PST Prohibiting for Travel Deviation | msrc_UNKNOWN | Details |
| display_alert_record_method | 4350 | View Alert Records | Displays the Alert Record. | msrc_UNKNOWN | Details |
| show_active_alerts_method | 4373 | Device Status | msrc_UNKNOWN | Details | |
| clear_alert_record_method | 4351 | Clear Records | Clears the Alert Record. | msrc_UNKNOWN | Details |
| lcp_white_light_mapping_method | 4703 | Alert Mapping to Fault Light | Enable or disable the reporting of the Alert Mapping to Fault Light | msrc_UNKNOWN | Details |
| demand_brkout_time_method | 4606 | Demand Breakout Time Alert Pt | msrc_UNKNOWN | Details | |
| demand_stroke_time_method | 4607 | Demand Stroke Time Alert Pt | msrc_UNKNOWN | Details | |
| reset_stroke_time_method | 4608 | Reset Stroke Time Alert Pt | msrc_UNKNOWN | Details | |
| sis_stroke_alerts_method | 4609 | msrc_UNKNOWN | Details | ||
| pst_abnormal_criteria_method | 460A | PST Abnormal Criteria | msrc_UNKNOWN | Details | |
| pst_abort_criteria_method | 460B | PST Abort Criteria | msrc_UNKNOWN | Details | |
| pst_result_criticality_method | 460C | PST Result Criticality | msrc_UNKNOWN | Details | |
| pst_criteria_method | 460D | msrc_UNKNOWN | Details | ||
| pre_send_configuration_method | 03EF | pre_send_configuration_method | msrc_UNKNOWN | Details | |
| post_send_configuration_method | 03F0 | post_send_configuration_method | msrc_UNKNOWN | Details | |
| warning_message | 1017 | Set loop to manual | msrc_UNKNOWN | Details | |
| Name | ID | Label | Description | Type | Source |