Device dictionary

Loading…

Reference ID	String
0	YTA710
1	Device Status
2	Primary Variable Out of Limits
3	Non-Primary Variable Out of Limits
4	Loop Current Saturated
5	Loop Current Fixed
6	More Status Available
7	Cold Start
8	Configuration Changed
9	Device Malfunction
10	Device Status Mask
11	Extended Device Status
12	Failure
13	Out of Specification
14	Function Check
15	Extended Device Status Mask
16	Standardized Status 0
17	Device Variable Simulation Active
18	The device is in simulation mode and the level output is not representative of the process.
19	Non-Volatile Memory Defect
20	The Non-Volatile memory check is invalid or maybe corrupt, or the battery of a battery-backed memory has failed.
21	Volatile Memory Defect
22	The RAM memory check is invalid or maybe corrupt
23	Watchdog Reset Executed
24	A watchdog reset has been performed
25	Power Supply Conditions Out of Range
26	Power Supply condition is outside its allowable range
27	Environmental Conditions Out of Range
28	An internal or environmental condition is beyond acceptable limits.
29	Electronic Defect
30	A hardware problem not related to the sensor has been detected.
31	Device Configuration Locked
32	Device is in write-protect or is locked.
33	Standardized Status 0 Mask
34	Standardized Status 1
35	Status Simulation Active
36	The device status reported to the host may not represent the current state of the device.
37	Discrete Variable Simulation Active
38	The device is in simulation mode and one or more of its discrete variables are not representative of the process.
39	Event Notification Overflow
40	The event queue for one or more event specifications has overflowed.
41	Standardized Status 1 Mask
42	Burst OFF
43	Burst ON
44	Status group 0
45	CPU Fail
46	CPU failed.(AL-00) [Action]: Replace the device. Or contact sales office or service center.
47	Sensor NV Fail
48	Sensor non volatile is failed.(AL-01) [Action]: Replace the device. Or contact sales office or service center.
49	Temp NV Fail
50	Temp assy non volatile memory is failed.(AL-02) [Action]: Replace the device. Or contact sales office or service center.
51	AD Conv Fail
52	AD converter is failed.(AL-03) [Action]: Replace the device. Or contact sales office or service center.
53	Main Rvrs Calc Fail
54	Main assy reverse calculation is failed.(AL-04) [Action]: Replace the device. Or contact sales office or service center.
55	Temp Rvrs Calc Fail
56	Temp assy reverse calculation is failed.(AL-05) [Action]: Replace the device. Or contact sales office or service center.
57	Temp Voltage Fail
58	Temp assy voltage is failed.(AL-06) [Action]: Replace the device. Or contact sales office or service center.
59	Comm NV Fail
60	Communication non volatile memory is failed.(AL-07) [Action]: Replace the device. Or contact sales office or service center.
61	Status group 1
62	Temp NV Warning
63	'Temp Assy non volatile memory is warning.(AL-08) [Action]: Replace the device. Or contact sales office or service center.
64	Int Comm Fail
65	Internal communication is failed.(AL-09) [Action]: Replace the device. Or contact sales office or service center.
66	Status group 2
67	Sensor1 Failure
68	Sensor1 is disconnected.(AL-10) [Action]: Check sensor for damage and connection.
69	Sensor2 Failure
70	Sensor2 is disconnected.(AL-11) [Action]: Check sensor for damage and connection.
71	Sensor1 Short
72	Sensor1 is shorted.(AL-12) [Action]: Check sensor for damage and connection.
73	Sensor2 Short
74	Sensor2 is shorted.(AL-13) [Action]: Check sensor for damage and connection.
75	Sensor1 Corrosion
76	Sensor1 has been corroded.(AL-14) [Action]: Check damage of terminal and connection.
77	Sensor2 Corrosion
78	Sensor2 has been corroded.(AL-15) [Action]: Check damage of terminal and connection.
79	Sensor1 Signal Error
80	The input of sensor1 is out of measurable range.(AL-20) [Action]: Check sensor type and connection.
81	Sensor2 Signal Error
82	The input of sensor2 is out of measurable range.(AL-21) [Action]: Check sensor type and connection.
83	Status group 3
84	Terminal Sensor Fail
85	Terminal block temperature is abnormal.(AL-22) [Action]: Contact our service personnel.
86	Backup Sensor1 Fail
87	Since sensor1 of backup sensor fails, the input of sensor2 is enabled.(AL-23) [Action]: Implement the restoration process after replace sensor1.
88	Backup Sensor2 Fail
89	Sensor2 of backup sensor fails.(AL-24) [Action]: Implement the restoration process after replace sensor2.
90	Sensor Drift
91	Difference of temperature between 2sensors is over the threshold.(AL-25) [Action]: Check sensor fail.
92	Sensor1 Temp Cycle
93	Temperature cycle count of sensor1 is over the threshold.(AL-26) [Action]: Check sensor deterioration.
94	Sensor2 Temp Cycle
95	Temperature cycle count of sensor2 is over the threshold.(AL-27) [Action]: Check sensor deterioration.
96	Status group 4
97	Output Too Low
98	Loop current level is under the lower limit.(AL-30) [Action]: Check LRV setting and adjust.
99	Output Too High
100	Loop current level is over the upper limit.(AL-31) [Action]: Check URV setting and adjust.
101	Sensor1 Temp Low
102	Measured temperature of sensor1 is too low.(AL-40) [Action]: Check sensor setting.
103	Sensor1 Temp High
104	Measured temperature of sensor1 is too high.(AL-41) [Action]: Check sensor setting.
105	Sensor2 Temp Low
106	Measured temperature of sensor2 is too low.(AL-42) [Action]: Check sensor setting.
107	Sensor2 Temp High
108	Measured temperature of sensor2 is too high.(AL-43) [Action]: Check sensor setting.
109	Amb Temp Low
110	Ambient temperature is too low.(AL-44) [Action]: Use a heater to raise the ambient temperature, or reset to a higher level.
111	Amb Temp High
112	'Ambient temperature is too high.(AL-45) [Action]: Take enough distance from the source of heat, or reset to a lower level.
113	Status group 5
114	LRV Too Low
115	LRV setting is set lower than range of sensor specification temperature. (AL-50) [Action]: Check LRV setting.
116	LRV Too High
117	LRV setting is set higher than range of sensor specification temperature. (AL-51) [Action]: Check LRV setting.
118	URV Too Low
119	'URV setting is set lower than range of sensor specification temperature. (AL-52) [Action]: Check URV setting.
120	URV Too High
121	URV setting is set higher than range of sensor specification temperature. (AL-53) [Action]: Check URV setting.
122	Span Too Small
123	Span between LRV and URV is set smaller than recommended minimum value.(AL-54) [Action]: Check LRV and URV setting.
124	Status group 14
125	Illegal PV Cfg
126	There is incorrect item in setting of Device Variable mapped on PV.(AL-60) [Action]: Check PV mapping.
127	Illegal Sensor1 Cfg
128	There is incorrect item in setting of Sensor1.(AL-61) [Action]: Check setting of Sensor1.
129	Illegal Sensor2 Cfg
130	There is incorrect item in setting of Sensor2.(AL-62) [Action]: Check setting of Sensor2.
131	Status group 15
132	Output Manual Mode
133	Device is operating in loop test mode.(AL-70)
134	06x
135	Sensor1
136	Sensor1 - Terminal
137	Terminal
138	Sensor2
139	Sensor2 - Terminal
140	Sensor1 - Sensor2
141	Sensor2 - Sensor1
142	Average
143	Sensor Backup
144	Percent Range
145	Loop Current
146	PV
147	SV
148	TV
149	QV
150	BM0 Slot 0
151	BM0 Slot 1
152	BM0 Slot 2
153	BM0 Slot 3
154	BM0 Slot 4
155	BM0 Slot 5
156	BM0 Slot 6
157	BM0 Slot 7
158	BM1 Slot 0
159	BM1 Slot 1
160	BM1 Slot 2
161	BM1 Slot 3
162	BM1 Slot 4
163	BM1 Slot 5
164	BM1 Slot 6
165	BM1 Slot 7
166	BM2 Slot 0
167	BM2 Slot 1
168	BM2 Slot 2
169	BM2 Slot 3
170	BM2 Slot 4
171	BM2 Slot 5
172	BM2 Slot 6
173	BM2 Slot 7
174	BM3 Slot 0
175	BM3 Slot 1
176	BM3 Slot 2
177	BM3 Slot 3
178	BM3 Slot 4
179	BM3 Slot 5
180	BM3 Slot 6
181	BM3 Slot 7
182	BM0 Command
183	BM0 Update Period
184	BM0 Max Upd Period
185	BM0 Mode
186	BM0 Trigger Mode
187	BM0 Classification
188	BM0 Trigger Units
189	BM0 Trigger Level
190	BM1 Command
191	BM1 Update Period
192	BM1 Max Upd Period
193	BM1 Mode
194	BM1 Trigger Mode
195	BM1 Classification
196	BM1 Trigger Units
197	BM1 Trigger Level
198	BM2 Command
199	BM2 Update Period
200	BM2 Max Upd Period
201	BM2 Mode
202	BM2 Trigger Mode
203	BM2 Classification
204	BM2 Trigger Units
205	BM2 Trigger Level
206	BM3 Command
207	BM3 Update Period
208	BM3 Max Upd Period
209	BM3 Mode
210	BM3 Trigger Mode
211	BM3 Classification
212	BM3 Trigger Units
213	BM3 Trigger Level
214	Burst Messages
215	Events
216	Status group 0 Mask
217	Status group 1 Mask
218	Status group 2 Mask
219	Status group 3 Mask
220	Status group 4 Mask
221	Status group 5 Mask
222	Status group 14 Mask
223	Status group 15 Mask
224	EN Status
225	EN Mode
226	EN Time Stamp
227	EN Retry Time
228	EN Max Upd Time
229	EN Debouce
230	EN Device Status
231	EN Status group 0
232	EN Status group 1
233	EN Status group 2
234	EN Status group 3
235	EN Status group 4
236	EN Status group 5
237	EN Extended Device Status
238	EN Standardized Status 0
239	EN Standardized Status 1
240	EN Status group 14
241	EN Status group 15
242	YTA 710 Mode
243	Normal
244
245	Service
246	Factory
247	Number of Sensors
248	1 sensor input
249	2 sensor input
250	Sensor Matching Support
251	NOT Supported
252	Supported
253	SI Unit
254	Not Limited
255	Limited SI UNIT Only
256	Reverse Calc
257	Amb Temp Compensation
258	NOT Amb Temp Compensation
259	Squawk
260	Off
261	On
262	Squawk Once
263	Device Variables for Simulation
264	Burst Variable SLOT
265	Burst Variable SLOT for edit
266	Burst Variable SLOT0 for edit
267	Burst Variable SLOT1 for edit
268	Burst Variable SLOT2 for edit
269	Burst Variable SLOT3 for edit
270	Burst Variable SLOT4 for edit
271	Burst Variable SLOT5 for edit
272	Burst Variable SLOT6 for edit
273	Burst Variable SLOT7 for edit
274	Burst Command number for edit
275	Event Notification retry time for edit
276	Event Notification maximum update time for edit
277	Event Notification de-bounce interval for edit
278	Burst Message update period for edit
279	Burst Message max update period for edit
280	Burst Message trigger mode for edit
281	Burst Message trigger classification for edit
282	Burst Message trigger units for edit
283	Burst Message trigger level for edit
284	simulation flag
285	simulation value
286	simulation unit
287	simulation data quality status
288	simulation limit status
289	lower trim point value for edit
290	upper trim point value for edit
291	trim unit
292	Probe Connection
293	Single
294	Device Family Variable
295	Sns Drift Th Unit
296	Sns Drift Thrshld
297	.2f
298	.4f
299	Temp Cycle Val Unit
300	Temp Cycle Upr Val
301	Temp Cycle Lwr Val
302	Temp Cy Alm Thrsld
303	Temp Cycle S1 Cnt
304	Temp Cycle S2 Cnt
305	Temp Cycle rst Sns
306	1d
307	Sensor Number to Reset Max/Min
308	Operation Time
309	Operation Time sec
310	Auto Release Time
311	10 min
312	30 min
313	60 min
314	3 hours
315	6 hours
316	12 hours
317	Sensor Backup State
318	Backup Disable
319	Sensor1 Active
320	Sensor2 Active
321	AO lower endpoint
322	AO upper endpoint
323	AO Lower Limit
324	AO Upper Limit
325	AO Damping
326	s
327	AO Damp Point
328	%
329	ta_cnt_req
330	08X
331	ta_cnt_framing
332	04X
333	ta_cnt_overrun
334	ta_cnt_parity
335	ta_cnt_noise
336	ta_cnt_crc
337	ta_cnt_other
338	ta_cnt_normal_resp
339	ta_cnt_exception
340	ta_cnt_no_response
341	AO Sensor BO Dir
342	High
343	Low
344	User Config
345	AO Sensor BO Unit
346	mA
347	AO Sns BO Usr Val
348	MS Code1
349	MS Code2
350	MS Code3
351	ROM Revision
352	Serial Number
353	Manufacture Date
354	EEP State
355	Write Protect HW
356	Write Protect HMI
357	Write Protect SW
358	Enable wrt passwd
359	New password
360	Software seal
361	Break
362	Keep
363	Disp Info Select
364	Parameter
365	Unit
366	Status
367	Sensor Type
368	Sensor Wire
369	Disp1 Variable
370	Sensor1-Terminal
371	Sensor2-Terminal
372	Sensor1-Sensor2
373	Sensor2-Sensor1
374	Disp2 Variable
375	Not Used
376	Disp1 Decimal Point
377	decimal point:0
378	decimal point:1
379	decimal point:2
380	decimal point:3
381	Disp2 Decimal Point
382	% Decimal Point
383	mA Decimal Point
384	% Display On/Off
385	mA Display On/Off
386	Bar Graph On/Off
387	Display Cycle
388	Mid
389	Power On Info
390	Interrupt Count
391	Last Interrupt Time
392	Image file for Device Icon
393	YTA Icon
394	Device Variables
395	Dynamic Variables
396	Current Dev Status
397	Condensed Status Map
398	Device Status Map
399	Extended Device Status Map
400	Standardized Status 0 Map
401	Standardized Status 1 Map
402	Status group 0 Map
403	Status group 1 Map
404	Status group 2 Map
405	Status group 3 Map
406	Status group 4 Map
407	Status group 5 Map
408	Status group 14 Map
409	Status group 15 Map
410	Diagnostics
411	Sensor Diag
412	Sensor1 Diag Info
413	Sensor2 Diag Info
414	Sensor Diag Setting
415	Temp Cycle Diag
416	Temp Cycle Condition
417	Temp Cycle Setting
418	Voltage Interrupt
419	Sensor Max/Min Log
420	Status Log
421	Status Log0
422	Status Log1
423	Status Log2
424	Status Log3
425	Status Log4
426	Status Log5
427	Status Log6
428	Status Log7
429	Status Log8
430	Status Log9
431	Test Device
432	Device Variable Test
433	Device Status Test
434	Sensor1 Trim
435	Sensor2 Trim
436	PV Re-range
437	AO Trim
438	Sensor Basic Setup
439	Sensor1 Basic Setup
440	Sensor1 Value
441	Sensor1 Probe Setup
442	Sensor1 Others
443	Sensor2 Basic Setup
444	Sensor2 Value
445	Sensor2 Probe Setup
446	Sensor2 Others
447	CJC Setup
448	Term Basic Setup
449	PV Basic Setup
450	AO Basic Setup
451	Sensor Setup
452	Sensor1 Setup
453	Sensor1 Range
454	Sensor1 Status
455	Sensor2 Setup
456	Sensor2 Range
457	Sensor2 Status
458	Terminal Setup
459	Terminal Range
460	Terminal Status
461	PV Setup
462	AO Setup
463	Display Setup
464	Burst Setup
465	Easy Burst Setup
466	Detailed Burst Setup
467	BM1 Setting
468	BM2 Setting
469	BM3 Setting
470	Event Setup
471	Event Setting
472	HART setup
473	Date & Time
474	Write Protect
475	MS Codes
476	Device Information
477	Sensor1 Setting
478	Sensor2 Setting
479	Term/Cjc Setting
480	Terminal Setting
481	CJC Setting
482	DevVar Unit Setting
483	PV/AO Setting
484	PV Setting
485	AO Setting
486	SV/TV/QV Setting
487	HART Setting
488	Disp Setting
489	Diagnostics root menu
490	Process variables root menu
491	Device root menu
492	Maintenance root menu
493	Sensor
494	Sensor1 Resistance
495	Sensor2 Resistance
496	Temp Cycle
497	Analog Output & Dynamic Variables
498	Device
499	Analog Output
500	sensor2 Trim
501	Basic Setup
502	Sensor 1
503	Sensor 2
504	Probe
505	Type
506	Limit
507	Others
508	SensorMatching
509	IEC
510	CVD
511	CJC
512	Process Variables
513	Range
514	Damping
515	Range Limit
516	Burn Out
517	AO Current
518	Current Endpoint
519	Local Display
520	Display 1
521	Display 2
522	Diag/Test
523	Simulation
524	Analog Output Simulation
525	Variable Simulation
526	Status Simulation
527	Alarm
528	Alarm Mask
529	Burst Message
530	Easy Burst
531	Detailed Burst Message
532	Detailed Burst Message1
533	Detailed Burst Message2
534	Detailed Burst Message3
535	Event Notification
536	Event Notification Setting
537	Event Notification Status
538	Device/Hart
539	HART Communication
540	Device Informations
541	Revision
542	Device Specifications
543	Only for Offline
544	These parameters can only be set or changed in offline configuration.
545	Online
546	Upload Variables
547	Offline root menu
548	Diagnostics root
549	Device root
550	Process Variables root
551	Maintenance root
552	Sns1 Value
553	Help message for Sensor1 value
554	.3f
555	Sns1 Unit
556	Help message for Sensor1 value unit
557	Sns1 Device Family
558	Help message for Sensor1 device family
559	Sns1 Classification
560	Help message for Sensor1 classification
561	Sns1 PDQ
562	Help message for Sensor1 PDQ
563	Sns1 LS
564	Help message for Sensor1 LS
565	Sns1 Family Status
566	Help message for Sensor1 device family status
567	Probe Break Detected
568	Sns1 USL
569	Help message for Sensor1 USL
570	Sns1 LSL
571	Help message for Sensor1 LSL
572	Sns1 Min Span
573	Help message for Sensor1 min span
574	Sns1 Damp
575	Help message for Sensor1 damping
576	8.3f
577	Sns1 Update Period
578	Help message for Sensor1 update period
579	Sns1 Serial Number
580	Help message for Sensor1 serial number
581	7d
582	Sns1 Lower Trim
583	Help message for Sensor1 lower trim
584	Sns1 Upper Trim
585	Help message for Sensor1 upper trim
586	Sns1 Trim Support
587	Help message for Sensor1 trim support
588	Sns1 Min Lower Trim
589	Help message for Sensor1 min lower trim
590	Sns1 Max Lower Trim
591	Help message for Sensor1 max lower trim
592	Sns1 Min Upper Trim
593	Help message for Sensor1 min upper trim
594	Sns1 Max Upper Trim
595	Help message for Sensor1 max upper trim
596	Sns1 Min Diff
597	Help message for Sensor1 min differential
598	Sns1 Simulate
599	Help message for Sensor1 simulate
600	Sns1 Probe Type
601	Pt100 IEC 751
602	Pt200 IEC 751
603	Pt500 IEC 751
604	Pt1000 IEC 751
605	Pt100 JIS C1604-81
606	Ni120 DIN 43760
607	Cu10 SAMA RC21-4
608	T/C Type B IEC 584
609	T/C Type E IEC 584
610	T/C Type J IEC 584
611	T/C Type K IEC 584
612	T/C Type N IEC 584
613	T/C Type R IEC 584
614	T/C Type S IEC 584
615	T/C Type T IEC 584
616	T/C Type W3
617	T/C Type C(W5)
618	T/C Type L DIN 43710
619	T/C Type U DIN 43710
620	Calibrated RTD CVD Coeff
621	TC User table
622	No Connection
623	Sns1 Family Status 0
624	Sns1 Wire
625	2-wire
626	3-wire
627	4-wire
628	Sns1 2wire Resist
629	Ohms
630	Sns1 Temp Standard
631	International Practical Temperature Scale of 1968 (IPTS-68)
632	International Temperature Scale of 1990 (ITS-90)
633	Sns1 CVD R0
634	Sns1 CVD A
635	11.3e
636	Sns1 CVD B
637	Sns1 CVD C
638	Sns1 CVD Alpha
639	Sns1 CVD Beta
640	Sns1 CVD Delta
641	Sns1
642	Help message for Sensor1
643	Sns1 Value Max
644	Sns1 Value Min
645	S1 RC1
646	S1 RC2
647	S1 RC3
648	S1 RC4
649	S1 RP23
650	S1 TC Short Thrshld
651	S1 RTD Corr Thrshld
652	Sns1 Trim Unit
653	S1-T Value
654	Help message for S1-T Value
655	S1-T Unit
656	Help message for S1-T Unit
657	S1-T Device Family
658	Help message for S1-T device family
659	S1-T Classification
660	Help message for S1-T classification
661	S1-T PDQ
662	Help message for S1-T PDQ
663	S1-T LS
664	Help message for S1-T LS
665	S1-T Family Status
666	Help message for S1-T device family status
667	S1-T USL
668	Help message for S1-T USL
669	S1-T LSL
670	Help message for S1-T LSL
671	S1-T Min Span
672	Help message for S1-T min span
673	S1-T Damp
674	Help message for S1-T damping
675	S1-T Update Period
676	Help message for S1-T update period
677	S1-T Serial Number
678	Help message for S1-T serial number
679	S1-T Lower Trim
680	Help message for S1-T lower trim
681	S1-T Upper Trim
682	Help message for S1-T upper trim
683	S1-T Trim Support
684	Help message for S1-T trim support
685	S1-T Min Lower Trim
686	Help message for S1-T min lower trim
687	S1-T Max Lower Trim
688	Help message for S1-T max lower trim
689	S1-T Min Upper Trim
690	Help message for S1-T min upper trim
691	S1-T Max Upper Trim
692	Help message for S1-T max upper trim
693	S1-T Min Diff
694	Help message for S1-T min differential
695	S1-T Simulate
696	Help message for S1-T simulate
697	S1-T Trim Unit
698	S1-T
699	Help message for S1-T
700	Term Value
701	Help message for terminal value
702	Term Unit
703	Help message for terminal value unit
704	Term Device Family
705	Help message for terminal device family
706	Term Classification
707	Help message for terminal classification
708	Term PDQ
709	Help message for terminal PDQ
710	Term LS
711	Help message for terminal LS
712	Term Family Status
713	Help message for terminal device family status
714	Term USL
715	Help message for terminal USL
716	Term LSL
717	Help message for terminal LSL
718	Term Min Span
719	Help message for terminal min span
720	Term Damp
721	Help message for terminal damping
722	Term Update Period
723	Help message for terminal update period
724	Term Serial Number
725	Help message for terminal serial number
726	Term Lower Trim
727	Help message for terminal lower trim
728	Term Upper Trim
729	Help message for terminal upper trim
730	Term Trim Support
731	Help message for terminal trim support
732	Term Min Lower Trim
733	Help message for terminal min lower trim
734	Term Max Lower Trim
735	Help message for terminal max lower trim
736	Term Min Upper Trim
737	Help message for terminal min upper trim
738	Term Max Upper Trim
739	Help message for terminal max upper trim
740	Term Min Diff
741	Help message for terminal min differential
742	Term Simulate
743	Help message for terminal simulate
744	CJC Type
745	Internal CJC Temperature Measurement
746	Fixed CJC Temperature
747	Fixed CJC Unit
748	Fixed CJC Temp
749	Term Value Max
750	Term Value Min
751	Term Trim Unit
752	Term
753	Help message for terminal
754	Sns2 Value
755	Help message for sensor2 value
756	Sns2 Unit
757	Help message for sensor2 value unit
758	Sns2 Device Family
759	Help message for sensor2 device family
760	Sns2 Classification
761	Help message for sensor2 classification
762	Sns2 PDQ
763	Help message for sensor2 PDQ
764	Sns2 LS
765	Help message for sensor2 LS
766	Sns2 Family Status
767	Help message for sensor2 device family status
768	Sns2 USL
769	Help message for sensor2 USL
770	Sns2 LSL
771	Help message for sensor2 LSL
772	Sns2 Min Span
773	Help message for sensor2 min span
774	Sns2 Damp
775	Help message for sensor2 damping
776	Sns2 Update Period
777	Help message for sensor2 update period
778	Sns2 Serial Number
779	Help message for sensor2 serial number
780	Sns2 Lower Trim
781	Help message for sensor2 lower trim
782	Sns2 Upper Trim
783	Help message for sensor2 upper trim
784	Sns2 Trim Support
785	Help message for sensor2 trim support
786	Sns2 Min Lower Trim
787	Help message for sensor2 min lower trim
788	Sns2 Max Lower Trim
789	Help message for sensor2 max lower trim
790	Sns2 Min Upper Trim
791	Help message for sensor2 min upper trim
792	Sns2 Max Upper Trim
793	Help message for sensor2 max upper trim
794	Sns2 Min Diff
795	Help message for sensor2 min differential
796	Sns2 Simulate
797	Help message for sensor2 simulate
798	Sns2 Probe Type
799	Sns2 Family Status 0
800	Sns2 Wire
801	Sns2 2wire Resist
802	Sns2 Temp Standard
803	Sns2 CVD R0
804	Sns2 CVD A
805	Sns2 CVD B
806	Sns2 CVD C
807	Sns2 CVD Alpha
808	Sns2 CVD Beta
809	Sns2 CVD Delta
810	Sns2
811	Help message for sensor2
812	Sns2 Value Max
813	Sns2 Value Min
814	S2 RC3
815	S2 RC4
816	S2 RP43
817	S2 TC Short Thrshld
818	S2 RTD Corr Thrshld
819	Sns2 Trim Unit
820	S2-T Value
821	Help message for S2-T value
822	S2-T Unit
823	Help message for S2-T value unit
824	S2-T Device Family
825	Help message for S2-T device family
826	S2-T Classification
827	Help message for S2-T classification
828	S2-T PDQ
829	Help message for S2-T PDQ
830	S2-T LS
831	Help message for S2-T LS
832	S2-T Family Status
833	Help message for S2-T device family status
834	S2-T USL
835	Help message for S2-T USL
836	S2-T LSL
837	Help message for S2-T LSL
838	S2-T Min Span
839	Help message for S2-T min span
840	S2-T Damp
841	Help message for S2-T damping
842	S2-T Update Period
843	Help message for S2-T update period
844	S2-T Serial Number
845	Help message for S2-T serial number
846	S2-T Lower Trim
847	Help message for S2-T lower trim
848	S2-T Upper Trim
849	Help message for S2-T upper trim
850	S2-T Trim Support
851	Help message for S2-T trim support
852	S2-T Min Lower Trim
853	Help message for S2-T min lower trim
854	S2-T Max Lower Trim
855	Help message for S2-T max lower trim
856	S2-T Min Upper Trim
857	Help message for S2-T min upper trim
858	S2-T Max Upper Trim
859	Help message for S2-T max upper trim
860	S2-T Min Diff
861	Help message for S2-T min differential
862	S2-T Simulate
863	Help message for S2-T simulate
864	S2-T Trim Unit
865	S2-T
866	Help message for S2-T
867	S1-S2 Value
868	Help message for S1-S2 value
869	S1-S2 Unit
870	Help message for S1-S2 value unit
871	S1-S2 Device Family
872	Help message for S1-S2 device family
873	S1-S2 Classification
874	Help message for S1-S2 classification
875	S1-S2 PDQ
876	Help message for S1-S2 PDQ
877	S1-S2 LS
878	Help message for S1-S2 LS
879	S1-S2 Family Status
880	Help message for S1-S2 device family status
881	S1-S2 USL
882	Help message for S1-S2 USL
883	S1-S2 LSL
884	Help message for S1-S2 LSL
885	S1-S2 Min Span
886	Help message for S1-S2 min span
887	S1-S2 Damp
888	Help message for S1-S2 damping
889	S1-S2 Update Period
890	Help message for S1-S2 update period
891	S1-S2 Serial Number
892	Help message for S1-S2 serial number
893	S1-S2 Lower Trim
894	Help message for S1-S2 lower trim
895	S1-S2 Upper Trim
896	Help message for S1-S2 upper trim
897	S1-S2 Trim Support
898	Help message for S1-S2 trim support
899	S1-S2 Min Lower Trim
900	Help message for S1-S2 min lower trim
901	S1-S2 Max Lower Trim
902	Help message for S1-S2 max lower trim
903	S1-S2 Min Upper Trim
904	Help message for S1-S2 min upper trim
905	S1-S2 Max Upper Trim
906	Help message for S1-S2 max upper trim
907	S1-S2 Min Diff
908	Help message for S1-S2 min differential
909	S1-S2 Simulate
910	Help message for S1-S2 simulate
911	S1-S2 Trim Unit
912	S1-S2
913	Help message for S1-S2
914	S2-S1 Value
915	Help message for S2-S1 value
916	S2-S1 Unit
917	Help message for S2-S1 value unit
918	S2-S1 Device Family
919	Help message for S2-S1 device family
920	S2-S1 Classification
921	Help message for S2-S1 classification
922	S2-S1 PDQ
923	Help message for S2-S1 PDQ
924	S2-S1 LS
925	Help message for S2-S1 LS
926	S2-S1 Family Status
927	Help message for S2-S1 device family status
928	S2-S1 USL
929	Help message for S2-S1 USL
930	S2-S1 LSL
931	Help message for S2-S1 LSL
932	S2-S1 Min Span
933	Help message for S2-S1 min span
934	S2-S1 Damp
935	Help message for S2-S1 damping
936	S2-S1 Update Period
937	Help message for S2-S1 update period
938	S2-S1 Serial Number
939	Help message for S2-S1 serial number
940	S2-S1 Lower Trim
941	Help message for S2-S1 lower trim
942	S2-S1 Upper Trim
943	Help message for S2-S1 upper trim
944	S2-S1 Trim Support
945	Help message for S2-S1 trim support
946	S2-S1 Min Lower Trim
947	Help message for S2-S1 min lower trim
948	S2-S1 Max Lower Trim
949	Help message for S2-S1 max lower trim
950	S2-S1 Min Upper Trim
951	Help message for S2-S1 min upper trim
952	S2-S1 Max Upper Trim
953	Help message for S2-S1 max upper trim
954	S2-S1 Min Diff
955	Help message for S2-S1 min differential
956	S2-S1 Simulate
957	Help message for S2-S1 simulate
958	S2-S1 Trim Unit
959	S2-S1
960	Help message for s2_s1
961	AV Value
962	Help message for average value
963	AV Unit
964	Help message for average value unit
965	AV Device Family
966	Help message for average device family
967	AV Classification
968	Help message for average classification
969	AV PDQ
970	Help message for average PDQ
971	AV LS
972	Help message for average LS
973	AV Family Status
974	Help message for average device family status
975	AV USL
976	Help message for average USL
977	AV LSL
978	Help message for average LSL
979	AV Min Span
980	Help message for average min span
981	AV Damp
982	Help message for average damping
983	AV Update Period
984	Help message for average update period
985	AV Serial Number
986	Help message for average serial number
987	AV Lower Trim
988	Help message for average lower trim
989	AV Upper Trim
990	Help message for average upper trim
991	AV Trim Support
992	Help message for average trim support
993	AV Min Lower Trim
994	Help message for average min lower trim
995	AV Max Lower Trim
996	Help message for average max lower trim
997	AV Min Upper Trim
998	Help message for average min upper trim
999	AV Max Upper Trim
1000	Help message for average max upper trim
1001	AV Min Diff
1002	Help message for average min differential
1003	AV Simulate
1004	Help message for average simulate
1005	AV Trim Unit
1006	AV
1007	Help message for average
1008	SnsBck Value
1009	Help message for sensor_back value
1010	SnsBck Unit
1011	Help message for sensor_back value unit
1012	SnsBck Device Family
1013	Help message for sensor_back device family
1014	SnsBck Classification
1015	Help message for sensor_back classification
1016	SnsBck PDQ
1017	Help message for sensor_back PDQ
1018	SnsBck LS
1019	Help message for sensor_back LS
1020	SnsBck Family Status
1021	Help message for sensor_back device family status
1022	SnsBck USL
1023	Help message for sensor_back USL
1024	SnsBck LSL
1025	Help message for sensor_back LSL
1026	SnsBck Min Span
1027	Help message for sensor_back min span
1028	SnsBck Damp
1029	Help message for sensor_back damping
1030	SnsBck Update Period
1031	Help message for sensor_back update period
1032	SnsBck Serial Number
1033	Help message for sensor_back serial number
1034	SnsBck Lower Trim
1035	Help message for sensor_back lower trim
1036	SnsBck Upper Trim
1037	Help message for sensor_back upper trim
1038	SnsBck Trim Support
1039	Help message for sensor_back trim support
1040	SnsBck Min Lower Trim
1041	Help message for sensor_back min lower trim
1042	SnsBck Max Lower Trim
1043	Help message for sensor_back max lower trim
1044	SnsBck Min Upper Trim
1045	Help message for sensor_back min upper trim
1046	SnsBck Max Upper Trim
1047	Help message for sensor_back max upper trim
1048	SnsBck Min Diff
1049	Help message for sensor_back min differential
1050	SnsBck Simulate
1051	Help message for sensor_back simulate
1052	SnsBck Trim Unit
1053	SnsBck
1054	Help message for sensor_back
1055	Status group 16 Mask
1056	Status group 17 Mask
1057	Log Time 0
1058	Primary Dev Sts 0
1059	Secondary Dev Sts 0
1060	Extended Device Status 0
1061	Standardized Status 0 0
1062	Standardized Status 1 0
1063	Status group 0 0
1064	Status group 1 0
1065	Status group 2 0
1066	Status group 3 0
1067	Status group 4 0
1068	Status group 5 0
1069	Status group 14 0
1070	Status group 15 0
1071	Log Time 1
1072	Primary Dev Sts 1
1073	Secondary Dev Sts 1
1074	Extended Device Status 1
1075	Standardized Status 0 1
1076	Standardized Status 1 1
1077	Status group 0 1
1078	Status group 1 1
1079	Status group 2 1
1080	Status group 3 1
1081	Status group 4 1
1082	Status group 5 1
1083	Status group 14 1
1084	Status group 15 1
1085	Log Time 2
1086	Primary Dev Sts 2
1087	Secondary Dev Sts 2
1088	Extended Device Status 2
1089	Standardized Status 0 2
1090	Standardized Status 1 2
1091	Status group 0 2
1092	Status group 1 2
1093	Status group 2 2
1094	Status group 3 2
1095	Status group 4 2
1096	Status group 5 2
1097	Status group 14 2
1098	Status group 15 2
1099	Log Time 3
1100	Primary Dev Sts 3
1101	Secondary Dev Sts 3
1102	Extended Device Status 3
1103	Standardized Status 0 3
1104	Standardized Status 1 3
1105	Status group 0 3
1106	Status group 1 3
1107	Status group 2 3
1108	Status group 3 3
1109	Status group 4 3
1110	Status group 5 3
1111	Status group 14 3
1112	Status group 15 3
1113	Log Time 4
1114	Primary Dev Sts 4
1115	Secondary Dev Sts 4
1116	Extended Device Status 4
1117	Standardized Status 0 4
1118	Standardized Status 1 4
1119	Status group 0 4
1120	Status group 1 4
1121	Status group 2 4
1122	Status group 3 4
1123	Status group 4 4
1124	Status group 5 4
1125	Status group 14 4
1126	Status group 15 4
1127	Log Time 5
1128	Primary Dev Sts 5
1129	Secondary Dev Sts 5
1130	Extended Device Status 5
1131	Standardized Status 0 5
1132	Standardized Status 1 5
1133	Status group 0 5
1134	Status group 1 5
1135	Status group 2 5
1136	Status group 3 5
1137	Status group 4 5
1138	Status group 5 5
1139	Status group 14 5
1140	Status group 15 5
1141	Log Time 6
1142	Primary Dev Sts 6
1143	Secondary Dev Sts 6
1144	Extended Device Status 6
1145	Standardized Status 0 6
1146	Standardized Status 1 6
1147	Status group 0 6
1148	Status group 1 6
1149	Status group 2 6
1150	Status group 3 6
1151	Status group 4 6
1152	Status group 5 6
1153	Status group 14 6
1154	Status group 15 6
1155	Log Time 7
1156	Primary Dev Sts 7
1157	Secondary Dev Sts 7
1158	Extended Device Status 7
1159	Standardized Status 0 7
1160	Standardized Status 1 7
1161	Status group 0 7
1162	Status group 1 7
1163	Status group 2 7
1164	Status group 3 7
1165	Status group 4 7
1166	Status group 5 7
1167	Status group 14 7
1168	Status group 15 7
1169	Log Time 8
1170	Primary Dev Sts 8
1171	Secondary Dev Sts 8
1172	Extended Device Status 8
1173	Standardized Status 0 8
1174	Standardized Status 1 8
1175	Status group 0 8
1176	Status group 1 8
1177	Status group 2 8
1178	Status group 3 8
1179	Status group 4 8
1180	Status group 5 8
1181	Status group 14 8
1182	Status group 15 8
1183	Log Time 9
1184	Primary Dev Sts 9
1185	Secondary Dev Sts 9
1186	Extended Device Status 9
1187	Standardized Status 0 9
1188	Standardized Status 1 9
1189	Status group 0 9
1190	Status group 1 9
1191	Status group 2 9
1192	Status group 3 9
1193	Status group 4 9
1194	Status group 5 9
1195	Status group 14 9
1196	Status group 15 9
1197	Device Status Mask for edit
1198	Status group 0 Mask for edit
1199	Status group 1 Mask for edit
1200	Status group 2 Mask for edit
1201	Status group 3 Mask for edit
1202	Status group 4 Mask for edit
1203	Status group 5 Mask for edit
1204	Status group 14 Mask for edit
1205	Status group 15 Mask for edit
1206	Extended Device Status Mask for edit
1207	Standardized Status 0 Mask for edit
1208	Standardized Status 1 Mask for edit
1209	Device Status for simulation
1210	Status group 0 for simulation
1211	Status group 1 for simulation
1212	Status group 2 for simulation
1213	Status group 3 for simulation
1214	Status group 4 for simulation
1215	Status group 5 for simulation
1216	Status group 14 for simulation
1217	Status group 15 for simulation
1218	Extended Device Status for simulation
1219	Standardized Status 0 for simulation
1220	Standardized Status 1 for simulation
1221	Status Bit Not Supported
1222	No Effect
1223	Maintenance Required
1224	Disabled
1225	Enabled
1226	Reset
1227	Set
1228	Used to map a status condition to a severity level.
1229	Allows simulation of different status conditions.
1230	Bit Index
1231	Condensed status value
1232	Invalid Device Variable Index
1233	Device Variable index not allowed for this command
1234	Unsupported Probe Type
1235	Invalid Number of Wires
1236	Invalid Could Junction Compensation Code
1237	CJC Temperature too High
1238	CJC Temperature too Low
1239	Invalid Units Code
1240	Coefficient A Invalid
1241	Coefficient B Invalid
1242	Coefficient C Invalid
1243	Coefficient R0 Invalid
1244	Coefficient ALPHA Invalid
1245	Coefficient DELTA Invalid
1246	Coefficient BETA Invalid
1247	Invalid Burnout User Unit
1248	Lower Limit Too High
1249	Lower Limit Too Low
1250	Upper Limit Too High
1251	Upper Limit Too Low
1252	Upper value less than Lower Value
1253	Invalid Unit Code
1254	Damping Value Too Small
1255	Damping Value Too Large
1256	Damping Point Too Small
1257	Damping Point Too Large
1258	Received the new password once
1259	Starting Status Map Index must be even value.
1260	clear Cfg Chgd Flg
1261	clear Configuration Changed Flag
1262	clear More Sts Flg
1263	clear More Status Available Bit.
1264	rst Temp Cycle Cnt
1265	Reset Temp Cycle Count
1266	recover Sensor
1267	Make Sensors Enable
1268	Reset Sensor Max/Min Logs
1269	reset Sns Max/Min
1270	enable Dev Var Sim
1271	Enable device variable simulation
1272	disable Dev Var Sim
1273	Disable device variable simulation
1274	set Date/Time
1275	Set current date and time.
1276	set Sns1 Probe
1277	Set sensor1 probe type and number of wires.
1278	set Sns2 Probe
1279	Set sensor2 probe type and number of wires.
1280	set CJC Type
1281	Set CJC mode. In case of manual mode, also set temperature and unit.
1282	set Sns1 Matching
1283	Input the coefficients for sensor1 matching formula.
1284	set Sns2 Matching
1285	Input the coefficients for sensor2 matching formula.
1286	en/ds Dev Sts Sim
1287	Enable/Disable Device Status Simulation
1288	release WP Mode
1289	Release Write Protect Mode
1290	set New Password
1291	Set New Password
1292	exec Self Test
1293	exec Device Reset
1294	exec Loop Test
1295	rst Condensed Sts
1296	exec Squawk
1297	Sub Routine for Aborting
1298	Sub Routine for Exiting
1299	Sub Routine for Input the coefficients for sensor matching formula.
1300	Sub Routine for Dev Status and Xmtr status
1301	Display a command response for Debugging
1302	stop Burst
1303	Stop Burst Messages
1304	stop Easy Burst
1305	Stop Easy Burst Messages
1306	set Easy Burst
1307	Setup Easy Burst Message
1308	stop Detailed Burst
1309	Stop Detailed Burst Message
1310	set Detailed Burst
1311	Setup Detailed Burst Messages
1312	Sub Routine for Burst setting 103 edit
1313	Sub Routine for Burst setting 103 write
1314	Sub Routine for Burst setting 104 edit
1315	Sub Routine for Burst setting 104 write
1316	Sub Routine for Burst setting 107 edit
1317	Sub Routine for Burst setting 107 write
1318	Sub Routine for Burst setting 108 edit
1319	Sub Routine for Burst setting 108 write
1320	Sub Routine for Burst Message turn OFF
1321	Sub Routine for Burst Message turn ON
1322	Sub Routine for Burst Slots
1323	Sub Routine for Burst Target Command
1324	Sub Routine for Burst Period
1325	Sub Routine for Burst Get DV-code
1326	Sub Routine for Burst Trigger
1327	Sub Routine for Edit a Burst Slot
1328	stop Event
1329	Stop Event Notification
1330	set Event
1331	Setup Event Notification
1332	acknowledge Event
1333	Acknowledge Event Notification
1334	Sub Routine for Event Notification turn OFF
1335	Sub Routine for Event Notification turn ON
1336	Sub Routine for Event setting 116 edit
1337	Sub Routine for Event setting 116 write
1338	Sub Routine for Event setting 117 write
1339	Sub Routine for Event Timing
1340	Sub Routine for Event Status Mask
1341	reset Sensor1 Trim
1342	reset Sensor2 Trim
1343	set Sensor1 Trim
1344	set Sensor2 Trim
1345	set AO Trim
1346	Setup Loop Current Trim
1347	reset AO Trim
1348	Reset Loop Current Trim
1349	Sub Routine for set lower trim for device variable
1350	Sub Routine for set upper trim for device variable
1351	Sub Routine for set Device Variable Trim
1352	Sub Routine for reset Device Variable Trim
1353	PV Analog Channel Saturated
1354	PV Analog Channel Fixed
1355	Wireless
1356	WirelessHART Device
1357	IEEE 802.15.4 2.4GHz DSSS with O-QPSK Modulation
1358	Primary
1359	Primary Analog Channel
1360	Secondary
1361	Secondary Analog Channel
1362	Tertiary
1363	Tertiary Analog Channel
1364	Quaternary
1365	Quaternary Analog Channel
1366	Quinary
1367	Quinary Analog Channel
1368	Critical Power Failure
1369	Lock all
1370	Trim not supported
1371	Configuration cannot be changed
1372	Locked by gateway
1373	Analog Input Channel
1374	Analog Output Channel
1375	Secondary Analog Channel Saturated
1376	Tertiary Analog Channel Saturated
1377	Quaternary Analog Channel Saturated
1378	Quinary Analog Channel Saturated
1379	Secondary Analog Channel Fixed
1380	Tertiary Analog Channel Fixed
1381	Quaternary Analog Channel Fixed
1382	Quinary Analog Channel Fixed
1383	Simulation active
1384	Non-Volatile memory failure
1385	Volatile memory error
1386	Watchdog reset executed
1387	Voltage conditions out of range
1388	A voltage condition is outside its allowable range
1389	Environmental conditions out of range
1390	Electronic failure
1391	Subdevice list changed
1392	Duplicate master detected
1393	Capacity Denied
1394	The device was unable to acquire the communication bandwidth required to support the Burst Messaging specified
1395	Bandwidth allocation pending
1396	Block transfer pending
1397	Battery life
1398	Percent range
1399	Loop current
1400	Primary variable
1401	Secondary variable
1402	Tertiary variable
1403	Quaternary variable
1404	Read receive time
1405	Write date and time
1406	Non-Volatile Clock
1407	When set the device contains a battery-backed clock. In this case, the clock does not need to be reset if there is a power failure.
1408	Clock Uninitialized
1409	The real-time clock has never been set with the date and time. For example, the clock is volatile and power was removed from and restored to the device.
1410	None
1411	No restrictions
1412	SI Only
1413	Restricted to SI Unit codes only
1414	Process automation device
1415	Discrete device
1416	Hybrid:Process automation+discrete
1417	I/O System
1418	WirelessHART Process automation device
1419	WirelessHART Discrete device
1420	WirelessHART Process automation+discrete
1421	WirelessHART Gateway
1422	WirelessHART Access point
1423	WirelessHART Process adapter
1424	WirelessHART Discrete adapter
1425	WirelessHART enabled handheld/portable maintenance tool
1426	Device Profile
1427	US
1428	United States of America
1429	JP
1430	Japan
1431	DE
1432	Germany
1433	FR
1434	France
1435	ES
1436	Spain
1437	RU
1438	Russian Federation
1439	CN
1440	People's Republic of China
1441	Secondary Master
1442	Primary Master
1443	Device Diagnostic Status 0
1444	Device Diagnostic Status 1
1445	I/O and Subdevice Status
1446	WirelessHART Status
1447	Time Set Option
1448	Real Time Clock Flags
1449	Country
1450	Country of intended device installation
1451	SI Unit Control
1452	Indicates if device should only display SI unit codes
1453	Burst Trigger Units
1454	Enable on token-passing data link layer only
1455	Enable on TDMA data link layer only
1456	Enable on both TDMA and token-passing data link layer
1457	Burst Trigger Class
1458	Continuous
1459	The Burst Message is published continuously at (worst case) the Minimum Update Period.
1460	Window
1461	The Burst Message is triggered when the source value deviates more than the specified trigger value
1462	Rising
1463	The Burst Message is triggered when source value Rises Above the specified trigger value.
1464	Falling
1465	The Burst Message is triggered when the source value Falls Below the specified trigger value.
1466	On-change
1467	The Burst Message is triggered when any value in the message changes.
1468	Enable event notification on token-passing data link layer
1469	Enable event notification on TDMA data link layer
1470	Enable event notification on TDMA and token-passing data link layer
1471	Configuration changed event pending
1472	Device status event pending
1473	More status available event pending
1474	Wired HART Enabled
1475	Enabled on Wired HART device connection only
1476	Wireless HART Enabled
1477	Enabled on WirelessHART device connection only
1478	Both Wired and WirelessHart Enabled
1479	Enabled on both Wired and WirelessHART connections
1480	Burst Msg Trigger Mode
1481	Event Status
1482	Event Notification Control
1483	Ext dev status Mask
1484	Device Diagnostic Status 0 Mask
1485	Device Diagnostic Status 1 Mask
1486	Device Diagnostic Status 2 Mask
1487	Device Diagnostic Status 3 Mask
1488	AO saturated Mask
1489	AO fixed Mask
1490	Latched Device Status
1491	Operate mode Mask
1492	Not Defined
1493	Latched Ext dev status
1494	Latched Device Diagnostic Status 0
1495	Latched Device Diagnostic Status 1
1496	Latched Device Diagnostic Status 2
1497	Latched Device Diagnostic Status 3
1498	Latched AO saturated
1499	Latched AO fixed
1500	Latched Operate Mode
1501	Time Stamp
1502	Relative time value on network
1503	8u
1504	Dynamic Variables Returned for Device Variables
1505	Command Response Truncated
1506	Configuration Change Counter Mismatch
1507	Status bytes mismatch
1508	Update time adjusted
1509	Invalid burst message
1510	Invalid device variable classification
1511	Invalid burst trigger mode selection code
1512	Burst condition conflict
1513	Update period increased
1514	Insufficient bandwidth
1515	Update period or debounce interval adjusted
1516	Update times adjusted
1517	Update rate uncertain
1518	Not all events cleared
1519	count
1520	Device Variable
1521	Variable to trim
1522	Current Date
1523	Current Date based upon the real-time clock in the field device
1524	Current Time
1525	Current Time based upon the real-time clock in the field device
1526	Set Clock Time
1527	Time to set the real time clock in the field device to, or time that the real-time clock was last set
1528	Set Clock Date
1529	Date to set the real-time clock in the field device to, or date that the real-time clock was last set
1530	STX Count
1531	Count of STX messages received by this device
1532	ACK Count
1533	Count of ACK messages received by this device
1534	BACK Count
1535	Count of BACK messages received by this device
1536	Update Period
1537	Update period for burst message
1538	5.3f
1539	Max Update Period
1540	Maxium update period for burst message
1541	Burst Variable Code
1542	Burst Variable Slot - Device variable code assigned to the slot to be read in burst mode.
1543	Burst Message Number
1544	Total Burst Msgs
1545	Total number of burst messages supported by this device
1546	Burst Command
1547	Cmd 48: Read Additional Device Status
1548	Read Additional Device - This command reads additional device status information
1549	Burst Trigger Level
1550	Number of Events Supported
1551	Time First Unack Event Triggered
1552	The time when the first unacknowledged event was triggered
1553	Event Debounce Interval
1554	Event Notification Retry Time
1555	Max Update Time
1556	Device Specific Status 0 Mask
1557	Device Specific Status 1 Mask
1558	Device Specific Status 2 Mask
1559	Device Specific Status 3 Mask
1560	Device Specific Status 4 Mask
1561	Device Specific Status 5 Mask
1562	Device Specific Status 14 Mask
1563	Device Specific Status 15 Mask
1564	Device Specific Status 16 Mask
1565	Device Specific Status 17 Mask
1566	Latched Device Specific Status 0
1567	Latched Device Specific Status 1
1568	Latched Device Specific Status 2
1569	Latched Device Specific Status 3
1570	Latched Device Specific Status 4
1571	Latched Device Specific Status 5
1572	Latched Device Specific Status 14
1573	Latched Device Specific Status 15
1574	Latched Device Specific Status 16
1575	Latched Device Specific Status 17
1576	Latched Cfg chng count
1577	Event Number
1578	Burst Variable Codes
1579	Device returned a response of warning. Please refer to the following.
1580	Device returned a response of error. Please refer to the following. After that this operation will be aborted.
1581	Are you sure to clear "Configuration Changed Flag"?
1582	Exit;Clear
1583	Configuration Changed Flag is already off.
1584	Configuration Changed Flag was cleared.
1585	Failed to clear Configuration Changed Flag.
1586	Are you sure to clear "More Status Available Bit"?
1587	More Status Available Bit is already off.
1588	More Status Available Bit was cleared.
1589	Select Sensor No to reset aging cycle count:
1590	Sensor1;Sensor2;S1 and S2
1591	Are you sure to reset aging-cycle-count?
1592	Exit;Reset
1593	Aging Cycle Count was reset.
1594	Are you sure to recover sensor?
1595	Exit;Recover
1596	Sensor recovered.
1597	Select Sensor No to reset max/min logs:
1598	Are you sure to reset sensor-logs? (You cannot reset terminal max/min logs)
1599	Max/Min logs were reset.
1600	Select a Device Variable:
1601	Value for simulate: (%{simulation_unit_for_edit})
1602	Data quality status for simulate:
1603	Limit status for simulate:
1604	Are you sure ? Device Variable:%{deviceVariables_simulation} Value:%{simulation_value_for_edit} (%{simulation_unit_for_edit}) Data quality status:%{simulation_data_quality_for_edit} Limit status:%{simulation_limit_status_for_edit}
1605	Modify;OK
1606	Read Backed: Device Variable:%{deviceVariables_simulation} Value:%{simulation_value_for_check} (%{simulation_unit_for_check})
1607	Are you sure ?
1608	NO;YES
1609	Current date in device: %{current_date} Current time in device: %{current_time} Are you sure you to change the date and time ?
1610	Enter date (MM/DD/YYYY)
1611	Enter time (hh:mm:ss)
1612	Select Sensor1 Probe Type
1613	Sensor1 Probe Type: %{sensor1ProbeType_for_edit}
1614	Number of Wires: 2
1615	Select number of wires:
1616	2;3;4
1617	Number of Wires: %{wires}
1618	2 wire resistance
1619	2 Wire Resigtance: %{sensor1Rtd2WireResistance_for_edit}
1620	Probe type of sensor2 will be changed to "No connection". Is it OK ?
1621	*Caution: Sensor2 -> No connection
1622	Invalid probe type.
1623	Sending Sensor1 Probe Type ...
1624	Sensor1 has 4 wires, so Sensor2 cannot be connected. Change the setting of Sensor1 first.
1625	Select Sensor2 Probe Type
1626	Sensor2 Probe Type: %{sensor2ProbeType_for_edit}
1627	2;3
1628	2 Wire Resigtance: %{sensor2Rtd2WireResistance_for_edit}
1629	Sending Sensor2 Probe Type ...
1630	Select CJC mode
1631	CJC Type: %{cjcType_for_edit}
1632	Fixed CJC Temperature unit
1633	Fixed CJC Temperature unit: %{cjcFixedTempUnit_for_edit}
1634	Fixed CJC Temperature: %{cjcFixedTemperature_for_edit}
1635	Select the status simulation mode:
1636	Are you sure to change the status simulation mode ?
1637	Status bit simulation was disabled.
1638	Target bit to simulate:
1639	Exit simulation;Exit (as maintaining simulation);Device Status;Extended Device Status;Standardized Status 0;Standardized Status 1;Status group 0;Status group 1;Status group 2;Status group 3;Status group 4;Status group 5;Status group 14;Status group 15
1640	Set bit to simulate:
1641	Enter current password to enable to write for 10 minutes:
1642	Released the write protection for 10 minutes.
1643	If you wish to release completely, you have to change password to all of spaces.
1644	Enter new password to change state of write protect:
1645	Re-enter new password within 20 seconds:
1646	Are you sure to perform self test?
1647	Exit;Perform
1648	Are you sure to perform device reset ?
1649	Exit;Execute
1650	analog_value
1651	WARN-Condensed status values will be reset to default values
1652	Are you sure to change the parameters?
1653	Condensed status values were reset
1654	Select squawk mode
1655	Aborting method due to last error
1656	Changed to new password.
1657	It changed the state of protection related password.
1658	There are two formulas for sensor matching.
1659	IEC:
1660	Rt=R0{1 +At +Bt^2 +C(t-100)*t^3}
1661
1662	Callendar-Van Dusen:
1663	Rt=R0{1 +Alpha(1+0.01Delta)t -AlphaDelta/10^4t^2 -AlphaBeta/10^8(t-100)t^3}
1664	Select a formula to use setting up:
1665	IEC(set R0,A,B,C);Callendar-Van Dusen(set R0,Alpha,Delta,Beta)
1666	Current device settings R0: %[4.2f]{r0} A : %[.3e]{coef_0} B : %[.3e]{coef_1} C : %[.3e]{coef_2}
1667	R0:
1668	r0
1669	A:
1670	coef_0
1671	B:
1672	coef_1
1673	C:
1674	coef_2
1675	Parameters to send to the device: R0: %[4.2f]{r0} A : %[.3e]{coef_0} B : %[.3e]{coef_1} C : %[.3e]{coef_2}
1676	Are you sure to change the parameters ?
1677	Current device settings R0 : %[4.2f]{r0} ALPHA : %[.3e]{coef_0} DELTA : %[.3e]{coef_1} BETA : %[.3e]{coef_2}
1678	R0 :
1679	ALPHA:
1680	DELTA:
1681	BETA :
1682	Parameters to send to the device: R0 : %[4.2f]{r0} ALPHA : %[.3e]{coef_0} DELTA : %[.3e]{coef_1} BETA : %[.3e]{coef_2}
1683	There is active status. Please refer to the followings.
1684	All status are cleared.
1685	Are you sure to disable status bit simulation ?
1686	Input a command number:
1687	command_number
1688	Input a command response code:
1689	command_response
1690	Select a target.
1691	Easy Burst Message;Burst Message 1;Burst Message 2;Burst Message 3;ALL
1692	Burst Message %[d]{target} is already OFF.
1693	Stop the Burst Message %[d]{target}. Are you sure ?
1694	Stop all the Burst Messages. Are you sure ?
1695	Easy Burst Message is already OFF.
1696	Stop the Easy Burst Message. Are you sure ?
1697	Easy Burst is already ON. You need turn OFF Easy Burst for the moment. Are you sure to turn OFF ?
1698	Abort;Turn-Off to continue
1699	Detailed Burst Message is ON.
1700	Select a data that you want to get:
1701	PV;Loop Current and Percent Range;PV,SV,TV,QV;Device Variable;Device Variable with Status;Additional Device Status
1702	SLOT 0:
1703	Device variable of SLOT 0 has to be besides "Not used". Try again.
1704	SLOT 1:
1705	SLOT 2:
1706	SLOT 3:
1707	Loop Current and Percent Range
1708	PV,SV,TV,QV
1709	Device Variable:
1710	Device Variable with Status:
1711	Additional Device Status
1712	SLOT 0:%{burst_variable_slot0_for_edit} SLOT 1:%{burst_variable_slot1_for_edit} SLOT 2:%{burst_variable_slot2_for_edit} SLOT 3:%{burst_variable_slot3_for_edit}
1713	Burst Message 1;Burst Message 2;Burst Message 3
1714	Burst Message %[d]{bmn} is already OFF.
1715	Stop the Burst Message %[d]{bmn}. Are you sure ?
1716	Easy Burst Message is ON.
1717	Burst Message %[d]{bmn} is already ON. You need turn OFF Burst Message %[d]{bmn} for the moment. Are you sure to turn OFF ?
1718	SLOT 0 (Required)
1719	;SLOT 1
1720	;SLOT 2
1721	;SLOT 3
1722	;SLOT 4
1723	;SLOT 5
1724	;SLOT 6
1725	;SLOT 7
1726	;Display
1727	;Proceed to the next
1728	;Abort
1729	Select a number of SLOT or what to do :
1730	Device Variables :
1731	SLOT 0:%{burst_variable_slot0_for_edit}
1732	SLOT 1:%{burst_variable_slot1_for_edit}
1733	SLOT 2:%{burst_variable_slot2_for_edit}
1734	SLOT 3:%{burst_variable_slot3_for_edit}
1735	SLOT 4:%{burst_variable_slot4_for_edit}
1736	SLOT 5:%{burst_variable_slot5_for_edit}
1737	SLOT 6:%{burst_variable_slot6_for_edit}
1738	SLOT 7:%{burst_variable_slot7_for_edit}
1739	PV,SV,TV,QV;
1740	Device Variable with Status
1741	Setting Burst Message Period :
1742	Set - Update Period;Set - Maximum Update Period;Display;Proceed to next;Abort (Discard)
1743	Update Period(in Seconds):
1744	0.5;1;2;4;8;16;32;60-3600(Any Value)
1745	Maximum Update Period(in Seconds):
1746	Update Period : %{update_period_for_edit} Maximum Update Period : %{max_update_period_for_edit}
1747	Update Period must be less than or equal to the Maximum Update Period. Please correct either of parameters.
1748	You have not yet inputted any timing parameters. (*)
1749	* Update Period : %{update_period_for_edit}
1750	Update Period : %{update_period_for_edit}
1751	* Maximum Update Period : %{max_update_period_for_edit}
1752	Maximum Update Period : %{max_update_period_for_edit}
1753	Do you apply these values and proceed the next?
1754	NO:Return;YES:Proceed
1755	Input Time(in Seconds from 60 to 3600):
1756	ms_timval
1757	Value to update: Update Period : %{update_period_for_edit} Maximum Update Period : %{max_update_period_for_edit}
1758	Select a trigger mode:
1759	Trigger Level:
1760	All slots SLOT number 1 or later will be "Not used". Are you sure ?
1761	No(modify this SLOT);Yes
1762	All slots SLOT number 2 or later will be "Not used". Are you sure ?
1763	All slots SLOT number 3 or later will be "Not used". Are you sure ?
1764	SLOT 4:
1765	All slots SLOT number 4 or later will be "Not used". Are you sure ?
1766	SLOT 5:
1767	All slots SLOT number 5 or later will be "Not used". Are you sure ?
1768	SLOT 6:
1769	All slots SLOT number 6 or later will be "Not used". Are you sure ?
1770	SLOT 7:
1771	All slots SLOT number 7 will be "Not used". Are you sure ?
1772	Event Notification is already OFF.
1773	Stop the Event Notification. Are you sure ?
1774	Event Notification is already ON. You need turn OFF Event Notification for the moment. Are you sure to turn OFF ?
1775	In order to enable the Event Notification, it is necessary to enable any Detailed Burst Messages.
1776	All events have already acked.
1777	Target latched outstanding event to ack: Time of first: %{time_of_first_unack_event} Config. Chng. Cntr: %{config_change_counter_latched_value}
1778	Are you sure to acknowledge the latched outstanding event ?
1779	All events have acked.
1780	Device Status Mask : %[02x]{device_status_mask_for_edit} Device Specific Status 0 Mask : %[02x]{device_specific_status_0_mask_for_edit} Device Specific Status 1 Mask : %[02x]{device_specific_status_1_mask_for_edit} Device Specific Status 2 Mask : %[02x]{device_specific_status_2_mask_for_edit} Device Specific Status 3 Mask : %[02x]{device_specific_status_3_mask_for_edit} Device Specific Status 4 Mask : %[02x]{device_specific_status_4_mask_for_edit} Device Specific Status 5 Mask : %[02x]{device_specific_status_5_mask_for_edit} Device Specific Status 6 Mask : %[02x]{device_specific_status_14_mask_for_edit} Device Specific Status 7 Mask : %[02x]{device_specific_status_15_mask_for_edit} Extended Device Status Mask : %[02x]{extended_device_status_mask_for_edit} Device Diagnostic Status 0 Mask : %[02x]{standardized_status_0_mask_for_edit} Device Diagnostic Status 1 Mask : %[02x]{standardized_status_1_mask_for_edit}
1781	Setting Event Notification Timing :
1782	Set - Event Notification Retry Time;Set - Maximum Update Time;Set - Event De-bounce Interval;Display;Proceed to next;Abort (Discard)
1783	Event Notification Retry Time(in Seconds):
1784	Maximum Update Time(in Seconds):
1785	Event De-bounce Interval(in Seconds):
1786	0.5;1;2;4;8;16;32;60-3600(Any Value);0(No De-bounce)
1787	Event Notification Retry Time : %{event_notification_retry_time_event_for_edit} Maximum Update Time : %{max_update_time_event_for_edit} Event De-bounce Interval : %{event_debounce_interval_event_for_edit}
1788	The Retry Time must be less than or equal to the Maximum Update Time. Please correct either of parameters.
1789	* Event Notification Retry Time : %{event_notification_retry_time_event_for_edit}
1790	Event Notification Retry Time : %{event_notification_retry_time_event_for_edit}
1791	* Maximum Update Time : %{max_update_time_event_for_edit}
1792	Maximum Update Time : %{max_update_time_event_for_edit}
1793	* Event De-bounce Interval : %{event_debounce_interval_event_for_edit}
1794	Event De-bounce Interval : %{event_debounce_interval_event_for_edit}
1795	Value to update: Event Notification Retry Time : %{event_notification_retry_time_event_for_edit} Maximum Update Time : %{max_update_time_event_for_edit} Event De-bounce Interval : %{event_debounce_interval_event_for_edit}
1796	Setting Event Notification Bit Mask :
1797	Set - Device Status Mask;Set - Status group 0 Mask;Set - Status group 1 Mask;Set - Status group 2 Mask;Set - Status group 3 Mask;Set - Status group 4 Mask;Set - Status group 5 Mask;Set - Status group 14 Mask;Set - Status group 15 Mask;Set - Extended Device Status Mask;Set - Standardized Status 0 Mask;Set - Standardized Status 1 Mask;Clear All Masks;Set All Masks;Display Masks;Proceed to the next;Abort (Discard)
1798	Device Status:
1799	Status group 0:
1800	Status group 1:
1801	Status group 2:
1802	Status group 3:
1803	Status group 4:
1804	Status group 5:
1805	Status group 14:
1806	Status group 15:
1807	Extended Device Status:
1808	Standardized Status 0:
1809	Standardized Status 1:
1810	Select a operation:
1811	Lower Trim;Lower & Upper Trim
1812	Are you sure to perform resetting loop-current-trim?
1813	Loop current trim was reset.
1814	Set the lower trim.
1815	Apply input between
1816	%[f]{trim_min} and %[f]{trim_max}.
1817	Previous trim = %[f]{trim_point}
1818	Process value = %[f]{lower_trim_for_edit} %{trim_unit_for_check}
1819	Press OK when stable.
1820	Lower Trim Point(indicated value of reference meter):
1821	Lower Trim Value %[f]{lower_trim_for_edit} is out of range. From %[f]{trim_min} to %[f]{trim_max} is valid. Try again.
1822	Set the upper trim.
1823	Process value = %[f]{upper_trim_for_edit} %{trim_unit_for_check}
1824	Upper Trim Point(indicated value of reference meter):
1825	Upper Trim Value %[f]{upper_trim_for_edit} is out of range. From %[f]{trim_min} to %[f]{trim_max} is valid. Try again.
Reference ID	String