Device dictionary

Loading…

Reference ID	String
0	EJA
1	Not Write Protected
2	Write Protected
3	Pressure sensor error
4	Temp(Cap) sensor error
5	Temp(Amp) sensor error
6	EEPROM(Cap) failure
7	EEPROM(Amp) failure
8	Dev id not entered
9	Illegal zero
10	Illegal span
11
12	Field Device Variable Unit- Engineering unit to be displayed with the Digital Value representation, Minimum Span, Upper Range Value, Lower Range Value, Lower Sensor Limit, and Upper Sensor Limit. Pressure- Pressure of the process measured with respect to a reference pressure.
13	Field Device Variable Value- Digital value that changes magnitude with respect to time with no user intervention. Pressure- Pressure of the process measured with respect to a reference pressure.
14	.3f
15	.4f
16	.1f
17	.5f
18	.2f
19	.0f
20	Percent of Range- Variable that tracks the Digital Value representation with respect to the range defined by the Lower Range Value and Upper Range Value, for normal operating modes. The units of this variable are always in percent. Pressure- Pressure of the process measured with respect to a reference pressure.
21	6.2f
22	%
23	Upper Sensor Limit Value- Defines the maximum useable value for the Upper Range Value. Pressure- Pressure of the process measured with respect to a reference pressure.
24	Lower Sensor Limit Value- Defines the minimum useable value for the Lower Range Value. Pressure- Pressure of the process measured with respect to a reference pressure.
25	Minimum Span Value- Defines the smallest allowable difference between the Upper Range Value and the Lower Range Value. Pressure- Pressure of the process measured with respect to a reference pressure.
26	Transfer Function- Defines the transformation function that will be applied from the Field Device Variable to the Analog Output, and Percent Range. The Transfer Function does not affect the Digital Value representation. Pressure- Pressure of the process measured with respect to a reference pressure.
27	Upper Range Value- Defines the operational endpoint from which the Analog Value, and the 100% point of the Percent Range are derived. In addition, the Upper Range Value defines an operational endpoint which the alarms associated with the Analog Value, and the alarms associated with the Digital Value representation are derived. Pressure- Pressure of the process measured with respect to a reference pressure.
28	Lower Range Value- Defines the operational endpoint from which the Analog Value, and the 0% point of the Percent Range are derived. In addition, the Lower Range Value defines an operational endpoint which the alarms associated with the Analog Value, and the alarms associated with the Digital Value representation are derived. Pressure- Pressure of the process measured with respect to a reference pressure.
29	Damping Value- Damping time constant applied to both the Digital Value representation and Analog Value of the respective Analog Output. The units of this variable are always in seconds. Pressure- Pressure of the process measured with respect to a reference pressure.
30	4.2f
31	s
32	Process conn type
33	Process Connector Type - Hardware adjacent to the sensor, that physically connects the process to the sensor.Pressure- Pressure of the process measured with respect to a reference pressure.
34	Level
35	Thread
36	Remote Seal Type- Type of device that is capable of detecting and passing on the process pressure on to the module. This is only unambiguous if 1 remote seal is installed.
37	Wafer
38	Nozzle
39	HTV-W
40	HTV-N
41	Sensor Fill Fluid- Fluid material in the module.
42	F oil
43	Number of Remote Seals- Physical quantity of the seals for the remote seal that is installed.
44	Send Warning- Yields a units code notice to the User.
45	Send warning
46	6.3f
47	Local keys
48	Process conn matl
49	Process Connector Material- Construction material of the process connector.
50	Wrt protect menu
51	Display condition
52	Engr disp range
53	Re-range
54	Temp sensor
55	Static Pres sensor
56	Sensor trim points
57	Write variables
58	Field Device Variable Value- Digital value that changes with respect to process or ambient temperature over time with no user intervention. Sensor Temperature- Temperature associated with the sensor that is responsible for a process measurement.
59	Field Device Variable Unit- Digital unit that the variable will be displayed with. Sensor Temperature- Temperature associated with the sensor that is responsible for a process measurement.
60	Snsr temp unit
61	C
62	F
63	Sensor Temperature -Temperature at the sensor that is responsible for a process measurement.
64	temperature_digital_units_help
65	temperature_digital_value_help
66	Static Pres
67	Static Pres unit
68	Primary Variable- Primary variable associated with the process Secondary Variable- secondary variable associated with the process. Tertiary Variable- tertiary variable associated with the process.
69	Low cut
70	5.2f
71	Cut mode
72	Linear
73	Zero
74	Bi-dir mode
75	off
76	on
77	Display mode
78	Normal %
79	User set
80	User set & %
81	Input press
82	Input press & %
83	Display fnctn
84	Square Root
85	cannot modified in the Square Root output mode
86	Engr unit
87	Engr disp LRV
88	8.3f
89	Engr disp URV
90	Engr disp point
91	0
92	1
93	2
94	3
95	Engr disp
96	Module range number- pressure range number located on the side of the sensor
97	M Range
98	H Range
99	L Range
100	A Range
101	B Range
102	C,D Range
103	E Range
104	V Range
105	Gasket Material- Construction material of a seal that exists between the module and flange.
106	Gasket matl
107	Remote Seal Fill Fluid- Fluid material in the device remote seal.
108	SH704
109	SH705
110	Ethy Gly/H2O
111	Prop Gly/H2O
112	Process conn size
113	Process Connector Size - Hardware adjacent to the sensor, that physically connects the process to the sensor.
114	ANSI 3,C 150
115	ANSI 3,C 300
116	ANSI 3,C 600
117	ANSI 4,C 150
118	ANSI 4,C 300
119	DIN 80,PN 10/16
120	DIN 80,PN 25
121	DIN 80,PN 40
122	DIN 100,PN 10/16
123	DIN 100,PN 25
124	DIN 50,PN 10/16
125	DIN 50,PN 25
126	DIN 50,PN 40
127	ANSI 150
128	ANSI 300
129	ANSI 600
130	DIN 10/16
131	DIN 25
132	DIN 40
133	1/2NPT Female
134	1/4NPT Female
135	Rc 1/2 Female
136	1/2NPT Male
137	G 1/2 Male
138	M20 * 1.5 Male
139	R 1/2 Male
140	Ext SW mode
141	Enable
142	Inhibit
143	Model
144	Serial No.
145	H2O Unit select
146	@4C
147	@20C(68F)
148	@20C
149	SI Option
150	OFF
151	ON
152	Not write protect mode
153	The 1st sequence for Xmtr ( Mismatch sequence? )
154	Software seal
155	Break
156	Keep
157	Enable wrt passwd
158	New password
159	Commands the EJA electronics to perform a selftest. Reports any errors that occured.
160	Enable wrt 10min
161	Aborting
162	Exiting
163	FMU860
164	DT
165	DVC
166	FCX
167	AS800
168	340T
169	340C
170	344
171	Siemens Micro K
172	SITRANS L
173	SIPAN PH
174	SITRANS P
175	75SMT
176	UNIDELTA
177	8320
178	SX5100
179	TSV175
180	DMU
181	3780
182	BM70
183	8u
184	low
185	high
186	tmp_av
187	Analog Output Value- Value that tracks the Digital Value representation, under normal operating modes. Analog Output- Measureable physical output which changes with respect to time, without user intervention.
188	5.3f
189	Analog Output Alarm Type- Defines how the Analog Output will respond when the Field Device detects that the Analog Output may not be tracking the associated Field Device Variable. NOTE- The Digital Value representation may not be determinate. Analog Output- Measureable physical output which changes with respect to time, without user intervention.
190	Sensor Serial Number- Uniquely identifies the sensor from which the Digital Value representation or Field Device variable is primarily derived. Pressure Sensor- Pressure hardware that measures pressure with respect to a reference pressure.
191	Measurement Type- Type of measurement application this Field Device is intended to be used with.
192	Lower Sensor Trim Point- Applied process pressure at which the last low sensor trim was performed. Pressure Sensor- Pressure hardware that measures pressure with respect to a reference pressure.
193	6.4f
194	Upper Sensor Trim Point- Applied process pressure at which the last upper sensor trim was performed. Pressure Sensor- Pressure hardware that measures pressure with respect to a reference pressure.
195	Flange Material- Construction material of flange type.
196	Remote Seal Isolator Material- Construction material of a part of the remote seal type that comes in contact with the process material. This is only unambiguous if 1 remote seal is installed.
197	Sensor Isolator Material- Construction material of a part of the module type that comes in contact with the process material.
198	Local Keys Control Mode- Controls the mode of the User Interface keys on the Field Device.
199	Drain Vent Material- Construction material of a removable plug that exists on the flange type that can be opened temporarily to remove unwanted process from the sensor area.
200	Pressure Sensor Lower Trim- Calibrate the pressure sensor.
201	Apply low pressure
202	Press OK when pressure is stable
203	Enter applied pressure value
204	trim_point
205	Remove pressure
206	Pressure Sensor Upper Trim- Calibrate the pressure sensor.
207	Apply hi pressure
208	Exit Trim Mode- Notifies the User that the trim is finished.
209	Trim was not done
210	Variables which use this as the units code will be in the previous units until this value is sent to the device.
211	Aborting method due to last error
212	Device maybe stuck in selftest.
213	Self test OK
214	Enter current password to enable to write for 10 minutes:
215	Released the write protection for 10 minutes.
216	If you wish to release completely, you have to change password to all of spaces.
217	Enter new password to change state of write protect:
218	Re-enter new password within 30 seconds:
219	Changed to new password.
220	It changed the state of protection related password.
Reference ID	String