| 0 |
AXFA11 |
| 1 |
AXFA14 |
| 2 |
10:uP Fault |
| 3 |
11:EEPROM Fault |
| 4 |
12:A/D(H) Fault |
| 5 |
13:A/D(L) Fault |
| 6 |
14:A/D(Z) Fault |
| 7 |
15:Coil Open |
| 8 |
16:EEPROM Dflt |
| 9 |
|
| 10 |
30:Sig Overflow |
| 11 |
31:Empty Pipe |
| 12 |
32:HH/LL Alm |
| 13 |
33:Adhesion Alm |
| 14 |
34:Insu-Brk Alm |
| 15 |
50:Span > 10m/s |
| 16 |
51:Span < 0.1m/s |
| 17 |
52:TTL>10000p/s |
| 18 |
53:TTL<0.0001p/s |
| 19 |
54:4-20 Lmt Err |
| 20 |
55:Multi Rng Err |
| 21 |
56:H/L HH/LL Set |
| 22 |
57:Dens Set Err |
| 23 |
60:PLS>10000p/s |
| 24 |
61:PLS > 5000p/s |
| 25 |
62:PLS > 1000p/s |
| 26 |
63:PLS > 500p/s |
| 27 |
64:PLS > 25p/s |
| 28 |
65:PLS > 15p/s |
| 29 |
66:PLS > 10p/s |
| 30 |
67:PLS > 5p/s |
| 31 |
70:PLS<0.0001p/s |
| 32 |
71:Meas Mod Set |
| 33 |
72:Size Set Err |
| 34 |
73:Adh Set Err |
| 35 |
80:Adhesion Wng |
| 36 |
81:Insu-Brk Wng |
| 37 |
82:Auto Zero Wng |
| 38 |
83:Fix Cur Wng |
| 39 |
84:Disp Over Wng |
| 40 |
Reverse Totl |
| 41 |
Dif Totl |
| 42 |
Flow Sensor- Hardware that measures flow rate. |
| 43 |
.0f |
| 44 |
.1f |
| 45 |
.2f |
| 46 |
.3f |
| 47 |
g |
| 48 |
PV AO |
| 49 |
6.3f |
| 50 |
Dummy float value |
| 51 |
Dummy Integer3 Value |
| 52 |
8d |
| 53 |
4-20mA Burn Out |
| 54 |
High |
| 55 |
Low |
| 56 |
Dummy transfer function |
| 57 |
PV Span |
| 58 |
Sets flow rate span (with units from "Base Flow Unit" and "Base Time Unit"). |
| 59 |
6g |
| 60 |
PV Damping |
| 61 |
5.1f |
| 62 |
Displays the totalized value for flow rate in the forward direction. |
| 63 |
Total units |
| 64 |
Total units- Engineering units that the frequency and totalizer outputs will be displayed with |
| 65 |
Total Value- Total of forward flow value. |
| 66 |
Total Unit |
| 67 |
.4f |
| 68 |
.5f |
| 69 |
.6f |
| 70 |
.7f |
| 71 |
Displays the totalized value for flow rate in the reverse direction. |
| 72 |
Reverse total units |
| 73 |
Reverse total units- Engineering units that the reverse total will be displayed with |
| 74 |
Reverse total Value- Total of reverse flow value. |
| 75 |
Reverse Totl Units |
| 76 |
Displays the totalized value for flow rate between forward totalization and reverse totalization. |
| 77 |
Differencial total units |
| 78 |
Differential total units- Engineering units that the differential total will be displayed with |
| 79 |
Differential total Value- Difference between total and reverse total. |
| 80 |
Dif Totl Units |
| 81 |
Select Flow Tube |
| 82 |
Selects the flowtube's model name. |
| 83 |
ADMAG AXF |
| 84 |
ADMAG |
| 85 |
ADMAG AE |
| 86 |
ADMAG SE |
| 87 |
YEWMAG |
| 88 |
Calibrator |
| 89 |
Other |
| 90 |
Nominal Size Unit |
| 91 |
Selects the nominal size units for the flowtube. |
| 92 |
mm |
| 93 |
inch |
| 94 |
Nominal Size |
| 95 |
Sets flowtube nominal size in selected unit at "Nominal Size Unit". |
| 96 |
7.2f |
| 97 |
6.2f |
| 98 |
7g |
| 99 |
Measure Mode |
| 100 |
Selects measurement mode for dual frequency excitation. |
| 101 |
Standard DF |
| 102 |
Enhanced DF |
| 103 |
Low MF |
| 104 |
Sets low-frequency meter factor for standard dual frequency excitation. |
| 105 |
6.4f |
| 106 |
High MF |
| 107 |
Sets high-frequency meter factor for standard dual frequency excitation. |
| 108 |
Low MF(EDF) |
| 109 |
Sets low-frequency meter factor for enhanced dual frequency excitation. |
| 110 |
High MF(EDF) |
| 111 |
Sets high-frequency meter factor for enhanced dual frequency excitation. |
| 112 |
Span Unit |
| 113 |
Ml/d |
| 114 |
m3/d |
| 115 |
kl/d |
| 116 |
l/d |
| 117 |
cm3/d |
| 118 |
m/d |
| 119 |
t/d |
| 120 |
kg/d |
| 121 |
g/d |
| 122 |
kcf/d |
| 123 |
cf/d |
| 124 |
mcf/d |
| 125 |
Mgal/d |
| 126 |
kgal/d |
| 127 |
gal/d |
| 128 |
mgal/d |
| 129 |
kbbl/d |
| 130 |
bbl/d |
| 131 |
mbbl/d |
| 132 |
ubbl/d |
| 133 |
ft/d |
| 134 |
klb/d |
| 135 |
lb/d |
| 136 |
Ml/h |
| 137 |
m3/h |
| 138 |
kl/h |
| 139 |
l/h |
| 140 |
cm3/h |
| 141 |
m/h |
| 142 |
t/h |
| 143 |
kg/h |
| 144 |
g/h |
| 145 |
kcf/h |
| 146 |
cf/h |
| 147 |
mcf/h |
| 148 |
Mgal/h |
| 149 |
kgal/h |
| 150 |
gal/h |
| 151 |
mgal/h |
| 152 |
kbbl/h |
| 153 |
bbl/h |
| 154 |
mbbl/h |
| 155 |
ubbl/h |
| 156 |
ft/h |
| 157 |
klb/h |
| 158 |
lb/h |
| 159 |
Ml/min |
| 160 |
m3/min |
| 161 |
kl/min |
| 162 |
l/min |
| 163 |
cm3/min |
| 164 |
m/min |
| 165 |
t/min |
| 166 |
kg/min |
| 167 |
g/min |
| 168 |
kcf/min |
| 169 |
cf/min |
| 170 |
mcf/min |
| 171 |
Mgal/min |
| 172 |
kgal/min |
| 173 |
gal/min |
| 174 |
mgal/min |
| 175 |
kbbl/min |
| 176 |
bbl/min |
| 177 |
mbbl/min |
| 178 |
ubbl/min |
| 179 |
ft/min |
| 180 |
klb/min |
| 181 |
lb/min |
| 182 |
Ml/s |
| 183 |
m3/s |
| 184 |
kl/s |
| 185 |
l/s |
| 186 |
cm3/s |
| 187 |
m/s |
| 188 |
t/s |
| 189 |
kg/s |
| 190 |
g/s |
| 191 |
kcf/s |
| 192 |
cf/s |
| 193 |
mcf/s |
| 194 |
Mgal/s |
| 195 |
kgal/s |
| 196 |
gal/s |
| 197 |
mgal/s |
| 198 |
kbbl/s |
| 199 |
bbl/s |
| 200 |
mbbl/s |
| 201 |
ubbl/s |
| 202 |
ft/s |
| 203 |
klb/s |
| 204 |
lb/s |
| 205 |
Base Flow Unit |
| 206 |
Selects flow units for the flow rate span. |
| 207 |
Ml(Megaliter) |
| 208 |
m3 |
| 209 |
kl(Kiloliter) |
| 210 |
l(Liter) |
| 211 |
cm3 |
| 212 |
m |
| 213 |
t |
| 214 |
kg |
| 215 |
kcf |
| 216 |
cf |
| 217 |
mcf |
| 218 |
Mgal(US) |
| 219 |
kgal(US) |
| 220 |
gal(US) |
| 221 |
mgal(US) |
| 222 |
kbbl(US Oil) |
| 223 |
bbl(US Oil) |
| 224 |
mbbl(US Oil) |
| 225 |
ubbl(US Oil) |
| 226 |
kbbl(US Beer) |
| 227 |
bbl(US Beer) |
| 228 |
mbbl(US Beer) |
| 229 |
ubbl(US Beer) |
| 230 |
ft |
| 231 |
klb(US) |
| 232 |
lb(US) |
| 233 |
Base Time Unit |
| 234 |
Selects time units for the flow rate span. |
| 235 |
/d |
| 236 |
/h |
| 237 |
/min |
| 238 |
/s |
| 239 |
Flow Decimal Pnt |
| 240 |
Selects decimal point position for the display unit's instantaneous flow rate. |
| 241 |
Auto |
| 242 |
0 |
| 243 |
1 |
| 244 |
2 |
| 245 |
3 |
| 246 |
Density Unit |
| 247 |
Sets units for density when mass flow rate is selected. |
| 248 |
kg/m3 |
| 249 |
lb/gal |
| 250 |
lb/cf |
| 251 |
Mass Flow Density |
| 252 |
Sets density when mass flow rate is selected (with units from "Density Unit"). |
| 253 |
User Span Select |
| 254 |
Selects whether or not special units are used as flow rate units. |
| 255 |
No |
| 256 |
Yes |
| 257 |
Flow User Unit |
| 258 |
Sets the special flow rate units. |
| 259 |
Flow User Span |
| 260 |
Sets span when using special flow rate units. |
| 261 |
4-20mA Low Cut |
| 262 |
% |
| 263 |
Sets the range in vicinity of 0 % within which the current output will be 4 mA. |
| 264 |
2.0f |
| 265 |
4-20mA Low Lmt |
| 266 |
Sets the low limit for current output. |
| 267 |
4-20mA High Lmt |
| 268 |
Sets the high limit for current output. |
| 269 |
Velocity Check |
| 270 |
Display of the span setting using flow velocity (m/s). |
| 271 |
Magflow Zero |
| 272 |
Displays the result of the automatic zero adjustment, or sets the zero point. |
| 273 |
7.3f |
| 274 |
Autozero Time |
| 275 |
3d |
| 276 |
Auto Zero Exe |
| 277 |
Selects whether or not automatic zero adjustment is carried out. |
| 278 |
No Execution |
| 279 |
Execution |
| 280 |
Display Select1 |
| 281 |
Selects content of the first line for Display Mode. |
| 282 |
Flow Rate(%) |
| 283 |
Flow Rate |
| 284 |
Flow Rate(mA) |
| 285 |
Forward Total |
| 286 |
Reverse Total |
| 287 |
Dif Total |
| 288 |
Display Select2 |
| 289 |
Selects content of the second line for Display Mode. |
| 290 |
Off |
| 291 |
Flow Rate(Bar) |
| 292 |
Tag No |
| 293 |
Adhesion Check |
| 294 |
Communication |
| 295 |
Display Select3 |
| 296 |
Selects content of the third line for Display Mode. |
| 297 |
Display Cycle |
| 298 |
Selects the display cycle. |
| 299 |
200ms |
| 300 |
400ms |
| 301 |
1s |
| 302 |
2s |
| 303 |
4s |
| 304 |
8s |
| 305 |
LCD Contrast |
| 306 |
2d |
| 307 |
Language |
| 308 |
Selects the language used for the display unit. |
| 309 |
English |
| 310 |
Japanese |
| 311 |
French |
| 312 |
German |
| 313 |
Italian |
| 314 |
Spanish |
| 315 |
Selects the flow rate unit per one pulse as used for totalization display. |
| 316 |
n Unit/P |
| 317 |
u Unit/P |
| 318 |
m Unit/P |
| 319 |
Unit/P |
| 320 |
k Unit/P |
| 321 |
M Unit/P |
| 322 |
Pulse/s |
| 323 |
Total Scale |
| 324 |
Sets the flow rate per one pulse as used for totalization display. |
| 325 |
Total Execution |
| 326 |
Executes "Start" or "Stop" of the totalization function, or executes "Preset Total" or "Preset Rev Total". |
| 327 |
Start |
| 328 |
Stop |
| 329 |
Preset Total |
| 330 |
Preset Rev Total |
| 331 |
Total Low Cut |
| 332 |
Sets the range in vicinity of 0% within which the totalization display will be halted. |
| 333 |
3.0f |
| 334 |
Ttl Set Val Upper |
| 335 |
Sets the totalization preset value in the upper 2 digits of the 8-digit totalized value. |
| 336 |
Ttl Set Val Lower |
| 337 |
Sets the totalization preset value in the lower 6 digits of the 8-digit totalized value. |
| 338 |
6d |
| 339 |
Ttl Switch Upper |
| 340 |
Sets the totalization switch value in the upper 2 digits of the 8-digit totalized value. |
| 341 |
Ttl Switch Lower |
| 342 |
Sets the totalization switch value in the lower 6 digits of the 8-digit totalized value. |
| 343 |
Ttl User Select |
| 344 |
Selects whether or not special units are used as totalized units. |
| 345 |
Ttl User Unit |
| 346 |
Sets the special totalized units. |
| 347 |
Total Decimal Pnt |
| 348 |
Selects position of decimal point for totalization display. |
| 349 |
4 |
| 350 |
5 |
| 351 |
6 |
| 352 |
7 |
| 353 |
Pulse Unit |
| 354 |
Selects the flow rate unit per one pulse as used for pulse output. |
| 355 |
Pulse Scale |
| 356 |
Sets the flow rate per one pulse as used for pulse output. |
| 357 |
Pulse Low Cut |
| 358 |
Sets the range in vicinity of 0% within which pulse output will be halted. |
| 359 |
Pulse Width |
| 360 |
Selects the pulse width for pulse output. |
| 361 |
50% Duty |
| 362 |
0.05 ms |
| 363 |
0.1 ms |
| 364 |
0.5 ms |
| 365 |
1 ms |
| 366 |
20 ms |
| 367 |
33 ms |
| 368 |
50 ms |
| 369 |
100 ms |
| 370 |
Pulse Active Mode |
| 371 |
Closed(On) Act |
| 372 |
Open(Off) Act |
| 373 |
T/P Damp Select |
| 374 |
Selects whether the flow rate value obtained through damping calculation for total/pulse or the instantaneous flow rate value (no damping) for total/pulse is to be used. |
| 375 |
Damping |
| 376 |
No Damping |
| 377 |
Flow Direction |
| 378 |
Selects the flow direction. |
| 379 |
Forward |
| 380 |
Reverse |
| 381 |
Rate Limit |
| 382 |
Sets the level to reduce output fluctuation. |
| 383 |
Dead Time |
| 384 |
Sets the dead time to reduce output fluctuation. When "0" is set, rate limit function is not available. |
| 385 |
Power Synch |
| 386 |
Selects whether or not the internal frequency is to be synchronized with the power supply frequency. |
| 387 |
Power Frequency |
| 388 |
Displays the power-supply frequency (for Power Synch = "Yes"), or sets the power-supply frequency (for Power Synch = "No"). |
| 389 |
5.2f |
| 390 |
Pulsing Flow |
| 391 |
Selects whether pulsing flow is to be supported. |
| 392 |
Low Low Alarm |
| 393 |
Sets level setting value for low-low flow rate limit (LL). |
| 394 |
4.0f |
| 395 |
Low Alarm |
| 396 |
Sets level setting value for low flow rate limit (L). |
| 397 |
H/L Alarm Hys |
| 398 |
Sets hysteresis width for high-low flow rate limit alarm. |
| 399 |
High High Alarm |
| 400 |
Sets level setting value for high-high flow rate limit (HH). |
| 401 |
High Alarm |
| 402 |
Sets level setting value for high flow rate limit (H). |
| 403 |
Alm Out Act Mode |
| 404 |
Selects whether alarm output will be set to "On Active" or "Off Active". |
| 405 |
Close(On) Act |
| 406 |
Alm-Setting |
| 407 |
Selects whether a setting alarm is to be specified as an alarm. |
| 408 |
Alm-Adhesion |
| 409 |
Selects whether an electrode adhesion alarm is to be specified as an alarm. |
| 410 |
Alm-Emp Pipe |
| 411 |
Selects whether an empty pipe alarm is to be specified as an alarm. |
| 412 |
Alm-Sig Over |
| 413 |
Selects whether a signal overflow alarm is to be specified as an alarm. |
| 414 |
Alm-HH/LL |
| 415 |
Selects whether a flow rate high-high or low-low alarm is to be specified as an alarm. |
| 416 |
4-20mA Alarm Out |
| 417 |
Selects the current output during alarm occurrence. |
| 418 |
2.4mA or Less |
| 419 |
4.0mA |
| 420 |
Hold |
| 421 |
21.6mA or More |
| 422 |
Operation Time |
| 423 |
Displays the operation time. |
| 424 |
Alm Record1 |
| 425 |
Displays the content of the most recent alarm. |
| 426 |
|
| 427 |
18:Power Off |
| 428 |
19:Inst Pwr Fail |
| 429 |
28:WDT |
| 430 |
34 Insulation Al |
| 431 |
Alm Record Time1 |
| 432 |
Displays the operation time at the occurrence of the most recent alarm. |
| 433 |
Alm Record2 |
| 434 |
Displays the content of the second most recent alarm. |
| 435 |
Alm Record Time2 |
| 436 |
Displays the operation time at occurrence of the second most recent alarm. |
| 437 |
Alm Record3 |
| 438 |
Displays the content of the third most recent alarm. |
| 439 |
Alm Record Time3 |
| 440 |
Displays the operation time at the occurrence of the third most recent alarm. |
| 441 |
Alm Record4 |
| 442 |
Displays the content of the fourth most recent alarm. |
| 443 |
Alm Record Time4 |
| 444 |
Displays the operation time at the occurrence of the fourth most recent alarm. |
| 445 |
SO1 Function |
| 446 |
Selects function for the SO1 terminal. |
| 447 |
No Function |
| 448 |
Warning Output |
| 449 |
Total Switch |
| 450 |
H/L Alarm |
| 451 |
HH/LL Alarm |
| 452 |
Fwd/Rev Ranges |
| 453 |
Auto 2 Ranges |
| 454 |
Auto 3 Ranges |
| 455 |
Auto 4 Ranges |
| 456 |
Ext 2 Answer |
| 457 |
Ext 3 Answer |
| 458 |
Ext 4 Answer |
| 459 |
SO2 Function |
| 460 |
Selects function for the SO2 terminal. |
| 461 |
SI1 Function |
| 462 |
Selects function for the SI1 terminal. |
| 463 |
0% Signal Lock |
| 464 |
Ext Auto Zero |
| 465 |
Ext Ttl Preset |
| 466 |
Ext Rev Ttl Set |
| 467 |
Ext 2 Ranges |
| 468 |
Ext 3 Ranges |
| 469 |
Ext 4 Ranges |
| 470 |
SI2 Function |
| 471 |
Selects function for the SI2 terminal. |
| 472 |
SO1/2 Active Mode |
| 473 |
Selects whether SO1/SO2 output will be set to "On Active" or "Off Active". |
| 474 |
SI1/2 Active Mode |
| 475 |
Selects whether SI1/SI2 input will be set to "Short Active" or "Open Active". |
| 476 |
Short Active |
| 477 |
Open Active |
| 478 |
DO Function |
| 479 |
Pulse Output |
| 480 |
Alarm Output |
| 481 |
Total Switch(O) |
| 482 |
H/L Alarm(O) |
| 483 |
HH/LL Alarm(O) |
| 484 |
Fwd/Rev Rngs(O) |
| 485 |
Auto 2 Rngs(O) |
| 486 |
Auto 3 Rngs(O) |
| 487 |
Auto 4 Rngs(O) |
| 488 |
Ext 2 Answer(O) |
| 489 |
DIO Function |
| 490 |
0% Sgnl Lock(I) |
| 491 |
Ext Auto Zero(I) |
| 492 |
Ext Ttl Set(I) |
| 493 |
Ext R Ttl Set(I) |
| 494 |
Ext 2 Ranges(I) |
| 495 |
DO Active Mode |
| 496 |
DIO Active Mode |
| 497 |
Closed/Short Act |
| 498 |
Open/Open Act |
| 499 |
Forward Span2 |
| 500 |
Sets flow rate span for forward No. 2 range. |
| 501 |
Forward Span3 |
| 502 |
Sets flow rate span for forward No. 3 range. |
| 503 |
Forward Span4 |
| 504 |
Sets flow rate span for forward No. 4 range. |
| 505 |
Auto Range Hys |
| 506 |
Sets hysteresis width for automatic range switching. |
| 507 |
Reverse Span1 |
| 508 |
Sets flow rate span for reverse No. 1 range. |
| 509 |
Reverse Span2 |
| 510 |
Sets flow rate span for reverse No. 2 range |
| 511 |
Reverse Span3 |
| 512 |
Sets flow rate span for reverse No. 3 range. |
| 513 |
Reverse Span4 |
| 514 |
Sets flow rate span for reverse No. 4 range |
| 515 |
Bi Direction Hys |
| 516 |
Sets hysteresis width for forward/reverse switching. |
| 517 |
1.0f |
| 518 |
Process Connect |
| 519 |
Selects the process connection of flowtube. |
| 520 |
No Set |
| 521 |
ANSI 150 Wafer |
| 522 |
ANSI 300 Wafer |
| 523 |
DIN PN10 Wafer |
| 524 |
DIN PN16 Wafer |
| 525 |
DIN PN40 Wafer |
| 526 |
JIS 10K Wafer |
| 527 |
JIS 20K Wafer |
| 528 |
JIS F12 Wafer |
| 529 |
ANSI 150 Flange |
| 530 |
ANSI 300 Flange |
| 531 |
DIN PN10 Flange |
| 532 |
DIN PN16 Flange |
| 533 |
DIN PN40 Flange |
| 534 |
JIS 10K Flange |
| 535 |
JIS 20K Flange |
| 536 |
JIS F12 Flange |
| 537 |
Union (Weld Jnt) |
| 538 |
Union (NPT Male) |
| 539 |
Union (R Male) |
| 540 |
Lining |
| 541 |
Selects the lining of flowtube. |
| 542 |
Flourocarbon PFA |
| 543 |
Polyurethane |
| 544 |
Ceramics |
| 545 |
EPDM |
| 546 |
Natural Rubber |
| 547 |
Electrode Material |
| 548 |
Selects the electrode material of flowtube. |
| 549 |
316L SS/1.4404 |
| 550 |
Platinum-iridium |
| 551 |
Platinum-alumina |
| 552 |
Hastelloy C276 |
| 553 |
Tantalum |
| 554 |
Titanium |
| 555 |
Tungsten Carbide |
| 556 |
Grounding Ring |
| 557 |
Selects the grounding ring of flowtube. |
| 558 |
None |
| 559 |
316 SS/1.4401 |
| 560 |
Use |
| 561 |
Selects the use of flowtube. |
| 562 |
General Purpose |
| 563 |
Submersible |
| 564 |
Ex-Proof |
| 565 |
Sanitary |
| 566 |
Lay Length |
| 567 |
Selects the lay length of flowtube. |
| 568 |
Standard |
| 569 |
ADMAG Replace |
| 570 |
Electrical Conn |
| 571 |
Selects the electrical connection of flowtube. |
| 572 |
JIS G1/2 Female |
| 573 |
ANSI 1/2 Female |
| 574 |
ISO M20 Female |
| 575 |
Electrode Struct |
| 576 |
Selects the electrode structure of flowtube. |
| 577 |
Non-replaceable |
| 578 |
Replaceable |
| 579 |
Software Rev No |
| 580 |
Software revision number |
| 581 |
Sensor Serial No |
| 582 |
The sensor serial number of flowtube. |
| 583 |
Test Mode |
| 584 |
Selects whether mode will be set to "Normal" or "Test". |
| 585 |
Normal |
| 586 |
Test |
| 587 |
Test SO1 |
| 588 |
Selects the test condition for SO1 terminal. |
| 589 |
Open(Off) |
| 590 |
Closed(On) |
| 591 |
Test SO2 |
| 592 |
Selects the test condition for SO2 terminal. |
| 593 |
Test Alarm Out |
| 594 |
Selects the test condition for alarm output terminal. |
| 595 |
Test SI1 |
| 596 |
Displays the test condition for SI1 terminal. |
| 597 |
Open |
| 598 |
Short |
| 599 |
Test SI2 |
| 600 |
Displays the test condition for SI2 terminal. |
| 601 |
Test DO |
| 602 |
Pulse |
| 603 |
Test DIO(O) |
| 604 |
Input Mode |
| 605 |
Test DIO(I) |
| 606 |
Open(Off) |
| 607 |
Percent Unit |
| 608 |
% |
| 609 |
% [F1] |
| 610 |
% [F2] |
| 611 |
% [F3] |
| 612 |
% [F4] |
| 613 |
% [R1] |
| 614 |
% [R2] |
| 615 |
% [R3] |
| 616 |
% [R4] |
| 617 |
Displays the instantaneous flow rate for the span as a percentage. |
| 618 |
Flow Unit |
| 619 |
spcl |
| 620 |
Displays the instantaneous flow rate for the span as a current output value. |
| 621 |
Displays the actual reading for instantaneous flow rate. |
| 622 |
PV AO Unit |
| 623 |
mA |
| 624 |
mA [F1] |
| 625 |
mA [F2] |
| 626 |
mA [F3] |
| 627 |
mA [F4] |
| 628 |
mA [R1] |
| 629 |
mA [R2] |
| 630 |
mA [R3] |
| 631 |
mA [R4] |
| 632 |
Memo 1 |
| 633 |
Memo field 1 |
| 634 |
Memo 2 |
| 635 |
Memo field 2 |
| 636 |
Memo 3 |
| 637 |
Memo field 3 |
| 638 |
Selects whether or not to perform diagnosis of adhesion to the electrode. |
| 639 |
Adhesion Level1 |
| 640 |
Sets the resistance value for adhesion Level1 to the electrode. |
| 641 |
M ohm |
| 642 |
Adhesion Level2 |
| 643 |
Sets the resistance value for adhesion Level2 to the electrode. |
| 644 |
Adhesion Level3 |
| 645 |
Sets the resistance value for adhesion Level3 to the electrode. |
| 646 |
Adhesion Level4 |
| 647 |
Sets the resistance value for adhesion Level4 to the electrode. |
| 648 |
Adh Measure Value |
| 649 |
Displays the resistance value for adhesion to the electrode. |
| 650 |
Software Seal |
| 651 |
Displays whether or not a Joker password was used (Break). |
| 652 |
Break |
| 653 |
Keep |
| 654 |
Enable Wrt 10min |
| 655 |
Sets the correct password so that write protection function will be released. |
| 656 |
New Password |
| 657 |
Sets the password for write protection function. |
| 658 |
Not Write Protect Mode |
| 659 |
The 1st sequence for Xmtr (Mismatch sequence?) |
| 660 |
Commands the AXFA11 electronics to perform a selftest. Reports any errors that occured. |
| 661 |
MF Set |
| 662 |
Sets the high and low-frequency meter factors for "Standard DF" or "Enhanced DF". |
| 663 |
When the correct password is input, write protection will be released for a period of 10 minutes. |
| 664 |
Changes the password for write protection. |
| 665 |
Aborting |
| 666 |
Exiting |
| 667 |
Wrt Protect Menu |
| 668 |
Device Setup |
| 669 |
Process Variables |
| 670 |
Diag/Service |
| 671 |
Test/Status |
| 672 |
Status |
| 673 |
Adjustment |
| 674 |
Output Test |
| 675 |
Diagnosis |
| 676 |
Easy Setup |
| 677 |
Detailed Setup |
| 678 |
Basic Setup |
| 679 |
Total |
| 680 |
Function Set |
| 681 |
Status Function |
| 682 |
Alarm |
| 683 |
Alm Record |
| 684 |
Display Set |
| 685 |
Aux |
| 686 |
HART Output |
| 687 |
Device Info |
| 688 |
Field Device Info |
| 689 |
Model Specific |
| 690 |
Review |
| 691 |
Review1 |
| 692 |
Review2 |
| 693 |
Review3 |
| 694 |
Review4 |
| 695 |
Upload Variables |
| 696 |
FMU860 |
| 697 |
DT |
| 698 |
DVC |
| 699 |
FCX |
| 700 |
AS800 |
| 701 |
340T |
| 702 |
340C |
| 703 |
344 |
| 704 |
Siemens Micro K |
| 705 |
SITRANS L |
| 706 |
SIPAN PH |
| 707 |
SITRANS P |
| 708 |
75SMT |
| 709 |
UNIDELTA |
| 710 |
8320 |
| 711 |
SX5100 |
| 712 |
TSV175 |
| 713 |
DMU |
| 714 |
3780 |
| 715 |
BM70 |
| 716 |
8u |
| 717 |
low |
| 718 |
high |
| 719 |
tmp_av |
| 720 |
Aborting method due to last error |
| 721 |
Device maybe stuck in selftest. |
| 722 |
Self test OK |
| 723 |
About to enter auto zero |
| 724 |
The previous error was seen while trying to initiate auto zero. |
| 725 |
Waiting for auto zero to complete. |
| 726 |
Auto zero passed |
| 727 |
Select Measure Mode |
| 728 |
Input Low MF value |
| 729 |
Input High MF value |
| 730 |
Input Low MF(EDF) value |
| 731 |
Input High MF(EDF) value |
| 732 |
Measure Mode is invalid selection. |
| 733 |
Enter current password to enable to write for 10 minutes: |
| 734 |
Released the write protection for 10 minutes. |
| 735 |
If you wish to release completely, you have to change password to all of spaces. |
| 736 |
Enter new password to change state of write protect: |
| 737 |
Re-enter new password within 30 seconds: |
| 738 |
Changed to new password. |
| 739 |
It changed the state of protection related password. |