Device dictionary

Loading…

Reference ID	String
0	HBM-165H
1	DKK-TOA
2	Dynamic Variables Returned for Device Variables
3	Command Response Truncated
4	HART proc auto dev
5	Discrete device
6	Hybrid:Process automation+discrete
7	I/O System
8	WirelessHART process automation device
9	WirelessHART discrete device
10	WirelessHART process automation+discrete
11	WirelessHART gateway
12	WirelessHART process adapter
13	WirelessHART discrete adapter
14	WirelessHART enabled handheld/portable maintenance tool
15	Device Profile
16	Device ID
17	.2f
18	8.2f
19	PV % of Range
20	PV LRV
21	Lower Range Value for Primary Variable.
22	PV URV
23	Upper Range Value for Primary Variable.
24	Configuration Change Counter Mismatch
25	OUTPUT SETTING MODE
26	ST-BY MODE
27	MEAS MODE
28	NV-MEMORY ERROR
29	PARAMETER ERROR
30	SYSTEM ERROR
31	Status bytes mismatch
32	Simulation active
33	The device is in simulation mode and the level output is not representative of the process.
34	Non-Volatile memory failure
35	The Non-Volatile memory check is invalid or maybe corrupt, or the battery of a battery-backed memory has failed.
36	Volatile memory error
37	The RAM memory check is invalid or maybe corrupt
38	Watchdog reset executed
39	A watchdog reset has been performed
40	Voltage conditions out of range
41	A voltage condition is outside its allowable range
42	Environmental conditions out of range
43	An internal or environmental condition is beyond acceptable limits.
44	Electronic failure
45	A hardware problem not related to the sensor has been detected.
46	Device Diagnostic Status 0
47
48	Meas Value
49	.0f
50	Meas Unit
51	Meas Unit
52	pH
53	pH Value
54	mV
55	ORP Value
56	Meas Damping value
57	4.0f
58	Meas Class
59	Meas PDQ
60	Meas LS
61	Meas Fmly stat
62	Meas USL
63	.3f
64	Meas LSL
65	Meas min span
66	Meas snsr s/n
67	7d
68	MEAS VALUE
69	.1f
70	Einh Snsr Temp
71	Einheit Sensortemperatur- Temperatureinheit mit der die Sensortemperatur angezeigt wird.
72	temperature Damping value
73	temperature Class
74	temperature PDQ
75	temperature LS
76	temperature Fmly stat
77	temperature USL
78	temperature LSL
79	temperature min span
80	temperature snsr s/n
81	Secondary Variable - Temperature
82	Review HART
83	8u
84	8.3f
85	Output Status
86	Output Status Byte
87	Uninitialized
88	Normal - one sensor
89	Normal - two sensors
90	Normal - three sensors
91	Shorted
92	Shorted- shorted field wiring.
93	Limited high
94	Limited high- block can not respond to upward movement of value.
95	Open
96	Open- open field wiring.
97	Limited low
98	Limited low- block can not respond to upward movement of target.
99	Initialization done
100	Initialization done- block initialization is complete.
101	Not selected
102	Not selected- target value provided by block was not selected.
103	No path
104	No path- there is no path to the process.
105	Fail
106	Fail- hardware failure.
107	Bad
108	Bad- block is out of service or has bad input.
109	Not from process
110	Not from process- value is not directly affected by any process information.
111	Local override
112	Local override- block has LO mode.
113	Not Cascade Mode
114	Not RCas Mode
115	Not ROut Mode
116	No communication
117	No communication- (NO_COM).
118	uint16_var_blk_char
119	uint32_var_blk_char
120	uint8_var_blk_char
121	int8_var_blk_char
122	new itest redef1 label
Reference ID	String