Device dictionary

Loading…

Reference ID	String
0	KGP5000
1	KOSO
2	Failure
3	Out of Specification
4	Function Check
5	Device Configuration Locked
6	reserved
7	EEPROM error
8	Position sensor fail
9	Supply pressure fail
10	Pressure out-1 fail
11	Pressure out-2 fail
12	High supply pressure
13	Low supply pressure
14	Position Alarm
15	Deviation Alarm
16	Temperature Alarm
17	4-20mA Input Signal Alarm
18	PST Alarm
19	Reserved
20	Maintenance required
21	Out of specification
22	Check function
23	Input
24	Position
25	IP signal
26	Pot. angle
27	Temperature
28	Sup. press.
29	Out1 press.
30	Out2 press.
31	Set point
32	Input
33	Input value
34	.1f
35	Input unit
36	Input Dev fmly
37	Input Class
38	Input PDQ
39	Input LS
40	Input Fmly stat
41	Input USL
42	Input LSL
43	Input min span
44	Input damp
45	Input Update Period
46
47	Input snsr s/n
48	7d
49	Input Lower trim
50	Input Upper trim
51	Input Trim support
52	Input Min lower trim
53	Input Max lower trim
54	Input Min upper trim
55	Input Max upper trim
56	Input Min trim diff
57	Simulate
58	Update Period
59	Position
60	Position value
61	Position unit
62	Position Dev fmly
63	Position Class
64	Position PDQ
65	Position LS
66	Position Fmly stat
67	Position USL
68	Position LSL
69	Position min span
70	Position damp
71	Position Update Period
72	Position snsr s/n
73	IP signal
74	IP signal value
75	IP signal unit
76	IP signal Dev fmly
77	IP signal Class
78	IP signal PDQ
79	IP signal LS
80	IP signal Fmly stat
81	IP signal USL
82	IP signal LSL
83	IP signal min span
84	IP signal damp
85	7.1f
86	IP signal Update Period
87	IP signal snsr s/n
88	Angle
89	Angle value
90	.4f
91	Angle unit
92	Angle Dev fmly
93	Angle Class
94	Angle PDQ
95	Angle LS
96	Angle Fmly stat
97	Angle USL
98	Angle LSL
99	Angle min span
100	Angle damp
101	10.4f
102	Angle Update Period
103	Angle snsr s/n
104	Postion sensor angle
105	Device temperature
106	Temperature unit
107	Temperature Units
108	Temp Class
109	Temp PDQ
110	Temp LS
111	Temp Dev Stat
112	Temp USL
113	f
114	Temp LSL
115	Temp min span
116	Temp Update Period
117	Temp snsr s/n
118	P-sup.
119	Pressure-supply
120	.2f
121	P-sup. Class
122	P-sup. PDQ
123	P-sup. LS
124	P-sup. Dev Stat
125	P-sup. USL
126	P-sup. LSL
127	P-sup. min span
128	P-sup. Update Period
129	P-sup. snsr s/n
130	P-out1
131	Pressure-out1
132	P-out1 Class
133	P-out1 PDQ
134	P-out1 LS
135	P-out1 Dev Stat
136	P-out1 USL
137	P-out1 LSL
138	P-out1 min span
139	P-out1 Update Period
140	P-out1 snsr s/n
141	P-out2
142	Pressure-out2
143	P-out2 Class
144	P-out2 PDQ
145	P-out2 LS
146	P-out2 Dev Stat
147	P-out2 USL
148	P-out2 LSL
149	P-out2 min span
150	P-out2 Update Period
151	P-out2 snsr s/n
152	Set point
153	Set point value
154	Set point unit
155	Set point Dev fmly
156	Set point Class
157	Set point PDQ
158	Set point LS
159	Set point Fmly stat
160	Set point USL
161	Set point LSL
162	Set point min span
163	Set point damp
164	Set point Update Period
165	Set point snsr s/n
166	Set point Lower trim
167	Set point Upper trim
168	Set point Trim support
169	Set point Min lower trim
170	Set point Max lower trim
171	Set point Min upper trim
172	Set point Max upper trim
173	Set point Min trim diff
174	Pos
175	PO1
176	Diff PO1-PO2
177	Index
178	add time
179	Clear time
180	Root menu
181	Menu
182	Device Root Menu
183	Extended menu
184	Process Variables Root Menu
185	Trends
186	P-sup
187	Diagnosis Root Menu
188	Diagnosis Extended Menu
189	Alarm status
190	Information
191	Setup
192	Maintenance
193	Diag. & Alarms
194	Monitor
195	Status
196	Input/posi etc
197	Pressure
198	Position alarm
199	Deviation alarm
200	Temperature alarm
201	S-pressure alarm
202	Pst alarm
203	Other failure
204	Positioner info.
205	Version
206	Config. parameter
207	Actuator setup
208	Valve action
209	Packing friction
210	Booster option
211	Set point dir.
212	Posi. transmit. dir.
213	PT burnout
214	PID parameter set
215	Cutoff or Limit
216	Dead band
217	Transfer function
218	Input damper
219	Range ability
220	Sprit range
221	Diag. result
222	Total stroke
223	Total dir. change
224	Low position time
225	Total time
226	25% step response
227	< Now >
228	<Prev.>
229	<Init.>
230	Pneumatic span
231	Pneumatic drift
232	S-valve signature
233	PST setup info.
234	Basic setup
235	Actuator type
236	Actuator type setting
237	Easy tuning
238	Full autotune
239	Tuning result
240	Position setup
241	Position span setup
242	Position Adjust
243	Adjust span 0% point.
244	1) Adjust by buttons below.
245	2) Ok to next
246	Auto span
247	Span autotune
248	Expert tuning
249	PID custom setup
250	Air-Out (not)= Air-In?
251	PID parameter Air-In
252	PID parameter Air-Out
253	Inside threshold
254	Inside PID AI
255	Inside PID AO
256	Sensitivity setup
257	Auto bias & size
258	Auto bias & size tuning
259	Auto bias
260	Auto bias tuning
261	Manual BIAS
262	25:
263	75:
264	Detail Setup
265	Transfer Function
266	Custom Curve
267	Range Ability
268	Damper Setting
269	Split Range
270	PT burnout dir.
271	AT span limit
272	Log Clear
273	Reset diagnosis data
274	Function select
275	Authority
276	Control mode
277	Password setup
278	Screen saver
279	Pressure unit
280	Calibration
281	Position Transmitter Calibration
282	Select 0%-side or 100%-side to adjust.
283	Position adjust
284	You can adjust output signal by 'up'/'down'.
285	Pilot relay adju.
286	Pilot relay adjust
287	Simulation test
288	Manual input
289	Preset input
290	Ramp resp. test
291	Step resp. test
292	Memory save & res
293	Service
294	AD values
295	Time stamp
296	PID values
297	Factory menu
298	HART Relation
299	Find Device
300	Squawk
301	HART/Device Information
302	Factory setup
303	IP signal range
304	IP signal factor
305	Virtual DIP SW
306	Cutoff IP signal
307	Online diag. setup
308	Total Stroke Setting
309	Total Direction Change Setting
310	Low Position Setting
311	Max/Min Temperature Setting
312	Partial stroke T.
313	Offline diag. set.
314	Offline diag. test
315	Alarm setup
316	High sup-pres. AL
317	Low sup-pres. AL
318	High/Low sup-pres. AL
319	All alarm clear
320	NAMUR status sel.
321	Position alarm NAMUR status
322	Deviation alarm NAMUR status
323	Temperature alarm NAMUR status
324	High sup-pressure NAMUR status
325	Low sup-pressure NAMUR status
326	Diag. test data
327	PST alarm result
328	Valve Signature
329	Advanced Diagnostics
330	Abort Operation
331	Abort operation
332	Read Autotune Status
333	Read autotune status
334	Open protected menu
335	Entering the password to open protected menus.
336	Enter the password to open protected menus
337	Close protected menu
338	Close protected menus.
339	Abort Autotune
340	Abort autotune
341	Position alarm setting
342	Deviation alarm setting
343	Temperature alarm setting
344	High/Low supply pressure alarm setting
345	Actuator motion
346	Actuator motion setting
347	Valve action setting
348	Packing friction setting
349	Booster option setting
350	Set point direction setting
351	Position transmitter direction setting
352	Full Autotune
353	Start full-autotune
354	Exit span setting mode
355	0%
356	Lower position(0%) setup
357	100%
358	Upper position(0%) setup
359	Adjust span 100% point.
360	Span Autotune
361	Start span-autotune
362	Response tuning
363	PID parameter set setting
364	Flag of Air-Out PID parameters are not equal to Air-In
365	PID parameter
366	PID parameter @ air-in setting
367	PID parameter @ air-out setting
368	Inside threshold parameter setting
369	Inside PID @ air-in
370	Inside PID @ air-out
371	Start auto bias & size tuning
372	Start auto bias
373	Start auto bias tuning
374	Manual BIAS setting.
375	Cutoff or Limit setting
376	Dead band setting
377	Transfer function setting
378	Used to read/write user defined transfer function. The curve can have 19 data points.
379	Range ability setting
380	Input damper setting
381	Split range
382	Split range setting
383	PT burnout direction setting
384	Autotune span limit setting
385	Authority setting
386	Control mode setting
387	Screen saver setting
388	Temperature unit setting
389	Presure unit setting
390	Input signal cal.
391	Input signal calibration
392	Cross point cal.
393	Cross point calibration
394	Position transmit
395	Position transmitter calibration
396	Pressure sensor
397	Pressure sensor calibration
398	Set Moving Value
399	Relative position adjust
400	Set Value
401	Absolute position adjust
402	Position transit.
403	Perform ramp response test.
404	ramp_operation
405	Perform step response test.
406	Save
407	Data save
408	Restore
409	Data restore
410	Factory default
411	Set factory default data.
412	Enable factory menu.
413	Find device
414	Read Device Information
415	Write Tag
416	Write tag data.
417	Write Descriptor
418	Write descriptor data.
419	Write Date
420	Write date data.
421	Write Long Tag
422	Write long tag.
423	Write Message
424	Write message data.
425	Write Final asmbly num
426	Write final assembly number.
427	Reset
428	Reset this device
429	IP signal range setting.
430	IP signal factor setting.
431	Virtual DIP SW setting.
432	Cutoff IP signal setting.
433	Total stroke setting
434	Diag. log clear
435	PST (offline)
436	High supply pressure alarm setting
437	Low supply pressure alarm setting
438	Pressure failure
439	Error/Alarm Clear
440	Position alarm NAMUR status select.
441	Deviation alarm NAMUR status select.
442	Temperature alarm NAMUR status select.
443	High supply pressure alarm NAMUR status select.
444	Low supply pressure alarm NAMUR status select.
445	Step res. save
446	Save 25% step res. result as prev. or init. data.
447	Pneu. span save
448	Save pneu. span test result as prev. or init. data.
449	Pneu. drift save
450	Save pneu. drift test result as prev. or init. data.
451	S-valve sig. save
452	Save S-valve sig. result as prev. or init. data.
453	Configuration and Execution
454	Clear Graph
455	Serial No.
456	Device serial no
457	08u
458	Read serial number
459	Read device serial number
460	Position alarm status
461	OK
462	NG
463	Deviation alarm status
464	Temperature alarm status
465	Input signal alarm
466	Input signal alarm status
467	PST alarm
468	Reserved alarm
469	Reserve
470	CPU error
471	CPU error status
472	Good
473	Fail
474	EEPROM error status
475	Position sensor error
476	Position sensor error status
477	P-sup. sensor error
478	Supply pressure sensor error status
479	P-out1 sensor error
480	Out-1 pressure sensor error status
481	P-out2 sensor error
482	Out-2 pressure sensor error status
483	High sup-pres. alram
484	High supply-pressure alram status
485	Low sup-pres. alram
486	Low supply-pressure alram status
487	Position alarm history
488	Deviation alarm history
489	Temperature alarm history
490	Input signal alarm history
491	PST alarm history
492	Position sensor error (history)
493	Supply pressure sensor error (history)
494	Out-1 pressure sensor error (history)
495	Out-2 pressure sensor error (history)
496	High sup-pres. alram history
497	High supply-pressure alram history
498	Low sup-pres. alram history
499	Low supply-pressure alram history
500	PST stroke alarm
501	NG:Valve does not stroke.
502	PST incomplete alarm
503	NG:PST does not complete.
504	Pst pressure alarm
505	NG:Pressure is too large.
506	PST reserved alarm
507	Alarm code
508	Error code
509	Error status
510	Supply pressure sensor error
511	Out-1 pressure sensor error
512	Out-2 pressure sensor error
513	Supply pressure high alarm
514	Supply pressure low alarm
515	Alarm back
516	Past alarm status
517	Error back
518	Past error status
519	PST alarms
520	Alarms on PST
521	Valve does not stroke
522	PST does not complete
523	Pressure is too large
524	LCD/HART
525	LCD&SW/HART mode flag
526	HART
527	LCD
528	Operation mode at HART
529	4-20mA
530	Span tuning
531	Positon transmitter cal.
532	Pressure cal.
533	Torque motor forced output
534	Mode
535	Local control mode
536	Manual
537	Autotune
538	Stroke range
539	Cross point
540	Step mode(HART)
541	Ramp mode(HART)
542	(Diag.)Step response
543	(Diag.)Pneumatic span
544	(Diag.)Pneumatic drift
545	(Diag.)Valve signature
546	(Diag.)Partil stroke t.
547	Actuator motion type
548	Linear
549	Rotary
550	Actuator action type
551	Single
552	Double
553	5300 Actuator
554	5300:KOSO high power actuator
555	Other
556	5300
557	Packing friction type
558	Low
559	High
560	With/Wgithout Booster
561	Without
562	With
563	Set point direction
564	Normal
565	Reverse
566	Valve direction
567	RA
568	DA
569	Valve action type
570	ATO
571	ATC
572	Position transmitter direction
573	Reverse PID
574	Reverse direction PID flag
575	Disable
576	Enable
577	Reverse PID method
578	Reverse direction PID method
579	Velocity
580	Deviation
581	Celsius
582	Fahrenheit
583	Dead band flag
584	Fuzzy
585	Fuzzy flag
586	PT burnout direction
587	Factory setup menu flag
588	OFF
589	ON
590	Reserve flags
591	Reserve flags(byte)
592	Actuator Type Write Control flag 0
593	Device Setting Write Control flag
594	Actuator Type Write Control flag 1
595	Actuator Type Write Control flag 2
596	Autotune span limit setting value
597	%
598	d
599	Cross Point
600	Cross point setting value
601	deg
602	Read Cross Point Setting
603	Read cross point setting
604	Horizontal Mode
605	Horizontal point setting mode
606	Exit
607	Enter
608	Already in this mode!
609	invalid mode selection
610	INVALID MODE SELECTION
611	Position Adjust Mode flag
612	Position adjust mode flag
613	Relative
614	Absolute
615	Adjust Quantity
616	Position adjust moving quantity
617	Span Setting Stroke 0
618	Span Setting Stroke 100
619	Span Position Setting Mode
620	Set span position setting mode
621	100%side(not 0%side)
622	In Span setting mode
623	Span Setting Side flag
624	Span setting side flag
625	Start
626	Start position
627	End
628	End position
629	Step
630	Step value
631	Time
632	Step time
633	s
634	Repeat
635	Step operation repeat
636	Continuous
637	One time only
638	Start Position
639	Ramp operation start position
640	Stop Position
641	Ramp operation target position
642	Wait Time
643	Ramp operation time before ramp action
644	Ramp Time
645	Ramp operation target time
646	Ramp operation repeat flag
647	0% side
648	Select cutoff/limit for 0% side
649	Cutoff
650	Limit
651	0% side value
652	Lower cutoff/limit value
653	100% side
654	Select cutoff/limit for 100% side
655	100% side value
656	Upper cutoff/limit value
657	Min
658	Split range min value
659	Max
660	Split range max value
661	X1 Value =
662	Custum curve value for index #1
663	5.1f
664	Y1 Value =
665	X2 Value =
666	Custum curve value for index #2
667	Y2 Value =
668	X3 Value =
669	Custum curve value for index #3
670	Y3 Value =
671	X4 Value =
672	Custum curve value for index #4
673	Y4 Value =
674	X5 Value =
675	Custum curve value for index #5
676	Y5 Value =
677	X6 Value =
678	Custum curve value for index #6
679	Y6 Value =
680	X7 Value =
681	Custum curve value for index #7
682	Y7 Value =
683	X8 Value =
684	Custum curve value for index #8
685	Y8 Value =
686	X9 Value =
687	Custum curve value for index #9
688	Y9 Value =
689	X10 Value =
690	Custum curve value for index #10
691	Y10 Value =
692	X11 Value =
693	Custum curve value for index #11
694	Y11 Value =
695	X12 Value =
696	Custum curve value for index #12
697	Y12 Value =
698	X13 Value =
699	Custum curve value for index #13
700	Y13 Value =
701	X14 Value =
702	Custum curve value for index #14
703	Y14 Value =
704	X15 Value =
705	Custum curve value for index #15
706	Y15 Value =
707	X16 Value =
708	Custum curve value for index #16
709	Y16 Value =
710	X17 Value =
711	Custum curve value for index #17
712	Y17 Value =
713	X18 Value =
714	Custum curve value for index #18
715	Y18 Value =
716	X19 Value =
717	Custum curve value for index #19
718	Y19 Value =
719	X20 Value =
720	Custum curve value for index #20
721	Y20 Value =
722	Transfer function select value
723	Equal percent low
724	Equal percent Mid
725	Equal percent High
726	Quick opening
727	Custom curve
728	Autotune status
729	No Autotune
730	PID Autotune
731	BIAS Autotune
732	Complete Autotune
733	Autotune result
734	Completed OK!
735	In execute
736	Aborted
737	Error at closing
738	Error at opening
739	Error at stopping
740	Error (marginal method)
741	Error at span measurement
742	Autotune Type
743	Autotune type
744	Full
745	Span
746	Sensitivity
747	Bias
748	Stroke sp. (Air-In)
749	Stroke speed at Posi-UP.
750	ms
751	5u
752	Stroke sp. (Air-Out)
753	Stroke speed at Posi-DN.
754	Rank
755	Rank setting value
756	-
757	Custom
758	XS
759	SS
760	S
761	M
762	L
763	LL
764	XL
765	Custom PID flag
766	Response tuning setting
767	-5 More stable
768	-4 More stable
769	-3 More stable
770	-2 More stable
771	-1 More stable
772	0 Normal
773	+1 More aggressive
774	+2 More aggressive
775	+3 More aggressive
776	+4 More aggressive
777	+5 More aggressive
778	Rank Setting Write Control flags
779	PID setting write control flags
780	Use different Air-Out PID from Air-In.
781	No
782	Yes
783	P value
784	PID setting P value
785	I value
786	PID setting I value
787	D value
788	PID setting D value
789	rP value
790	PID setting reverse P value
791	rI value
792	Pid setting reverse I value
793	rD value
794	Pid setting reverse D value
795	Deviation threshold for inside PID
796	Inside P value
797	Inside I value
798	Inside D value
799	Inside rP value
800	Inside rI value
801	Inside rD value
802	PID Setting Write Control flags
803	reverse PID flag
804	reverse P value
805	reverse I value
806	reverse D value
807	Inside reverse P
808	Inside reverse I
809	Inside reverse D
810	Input damper flag
811	Input damper setting flag
812	Input damper factor
813	Input damper setting factor
814	minutes
815	Dead band setting flag
816	Dead band value
817	Dead band setting value
818	Range ability setting value
819	u
820	0% side
821	Cutoff IP signal 0% side setting value
822	Cutoff IP signal 100% side setting value
823	Position alarm NAMUR status setting
824	Maintenance req.
825	Out of spec.
826	Deviation alarm NAMUR status setting
827	Temperature alarms
828	Temperature alarm NAMUR status setting
829	High sup-pressure alarm
830	Supply pressure high alarm NAMUR status setting
831	Low sup-pressure alarm
832	Supply pressure low alarm NAMUR status setting
833	Test result index
834	Diagnosis test result index
835	Now
836	Prev.
837	Init.
838	O.S. 0-25
839	Over shoot of step response test
840	O.S. 25-50
841	O.S. 50-75
842	O.S. 75-100
843	O.S. 100-75
844	O.S. 75-50
845	O.S. 50-25
846	O.S. 25-0
847	Dev. 0
848	Deviation of step response test
849	Dev. 0-25
850	Dev. 25-50
851	Dev. 50-75
852	Dev. 75-100
853	Dev. 100-75
854	Dev. 75-50
855	Dev. 50-25
856	Dev. 25-0
857	Test result
858	Pneumatic span test result
859	P1 not reach 0 @IPmin
860	P2 not zero @IPmin
861	P2 not reach Ps@IPmin
862	P1 not reach Ps@IPmax
863	P2 not zero @IPmax
864	P2 not reach 0 @IPmax
865	Air-IN/IPmin P1
866	Pout-1 @ Air-IN/IPmin in pneumatic span test.
867	Air-IN/IPmax P1
868	Pout-1 @ Air-IN/IPmax in pneumatic span test.
869	Air-OUT/IPmin P1
870	Pout-1 @ Air-OUT/IPmin in pneumatic span test.
871	Air-OUT/IPmax P1
872	Pout-1 @ Air-OUT/IPmax in pneumatic span test.
873	Air-IN/IPmin P2
874	Pout-2 @ Air-IN/IPmin in pneumatic span test.
875	Air-IN/IPmax P2
876	Pout-2 @ Air-IN/IPmax in pneumatic span test.
877	Air-OUT/IPmin P2
878	Pout-2 @ Air-OUT/IPmin in pneumatic span test.
879	Air-OUT/IPmax P2
880	Pout-2 @ Air-OUT/IPmax in pneumatic span test.
881	Posi-UP/25%
882	IP-signal @ Air-IN/25%-position in pneumatic drift test.
883	Posi-UP/50%
884	IP-signal @ Air-IN/50%-position in pneumatic drift test.
885	Posi-UP/75%
886	IP-signal @ Air-IN/75%-position in pneumatic drift test.
887	Posi-DN/25%
888	IP-signal @ Air-OUT/25%-position in pneumatic drift test.
889	Posi-DN/50%
890	IP-signal @ Air-OUT/50%-position in pneumatic drift test.
891	Posi-DN/75%
892	IP-signal @ Air-OUT/75%-position in pneumatic drift test.
893	Hysteresis/25%
894	IP-signal @ Hysteresis/25%-position in pneumatic drift test.
895	Hysteresis/50%
896	IP-signal @ Hysteresis/50%-position in pneumatic drift test.
897	Hysteresis/75%
898	IP-signal @ Hysteresis/75%-position in pneumatic drift test.
899	Pout-1@Air-In/25%-pos.
900	Pout-1 @ Air-IN/25%-position in pneumatic drift test.
901	Pout-1@Air-In/50%-pos.
902	Pout-1 @ Air-IN/50%-position in pneumatic drift test.
903	Pout-1@Air-In/75%-pos.
904	Pout-1 @ Air-IN/75%-position in pneumatic drift test.
905	Pout-1@Air-Out/25%-pos.
906	Pout-1 @ Air-OUT/25%-position in pneumatic drift test.
907	Pout-1@Air-Out/50%-pos.
908	Pout-1 @ Air-OUT/50%-position in pneumatic drift test.
909	Pout-1@Air-Out/75%-pos.
910	Pout-1 @ Air-OUT/75%-position in pneumatic drift test.
911	Pout-2@Air-In/25%-pos.
912	Pout-2 @ Air-IN/25%-position in pneumatic drift test.
913	Pout-2@Air-In/50%-pos.
914	Pout-2 @ Air-IN/50%-position in pneumatic drift test.
915	Pout-2@Air-In/75%-pos.
916	Pout-2 @ Air-IN/75%-position in pneumatic drift test.
917	Pout-2@Air-Out/25%-pos.
918	Pout-2 @ Air-OUT/25%-position in pneumatic drift test.
919	Pout-2@Air-Out/50%-pos.
920	Pout-2 @ Air-OUT/50%-position in pneumatic drift test.
921	Pout-2@Air-Out/75%-pos.
922	Pout-2 @ Air-OUT/75%-position in pneumatic drift test.
923	P-hysteresis 25%
924	Pressure hysteresis @ 25%-position in pneumatic drift test.
925	P-hysteresis 50%
926	Pressure hysteresis @ 50%-position in pneumatic drift test.
927	P-hysteresis 75%
928	Pressure hysteresis @ 75%-position in pneumatic drift test.
929	P-average 25%
930	Pressure average @ 25%-position in pneumatic drift test.
931	P-average 50%
932	Pressure average @ 50%-position in pneumatic drift test.
933	P-average 75%
934	Pressure average @ 75%-position in pneumatic drift test.
935	P-gradient 25-50%
936	Pressure gradient @ 25-50%-position in pneumatic drift test.
937	P-gradient 50-75%
938	Pressure gradient @ 50-75%-position in pneumatic drift test.
939	Temperature alarm flag
940	Temperature alarm Unit
941	Temperature alarm unit code
942	Low
943	Temperature alarm low thershold
944	High
945	Temperature alarm high thershold
946	Pressure failure setting flag
947	Deviation alarm flag
948	Threshold
949	Deviation alarm threshold
950	Times
951	Deviation alarm waiting time
952	Position alarm 0%side
953	Position alarm 0%side setting.
954	Lo alarm
955	Position low alarm setting.
956	Position alarm 100%side
957	Position alarm 100%side setting.
958	Hi alarm
959	Position high alarm setting.
960	threshold =
961	Position alarm 0%side threshold
962	Lo alarm threshold =
963	Position alarm 100%side threshold
964	Hi alarm threshold =
965	Diagnosis results / total time
966	Low Position Time
967	Diagnosis results / low position time
968	Low Position Time Percentage
969	Low position time / Up time
970	Time Unit
971	Total Stroke
972	Diagnosis results total stroke
973	Total Direction Change
974	Diagnosis results total direction change
975	Temperature Unit
976	Diagnosis results temperature Unit
977	Maximum Temperature
978	Diagnosis results maximum temperature
979	Minimum Temperature
980	Diagnosis results minimum temperature
981	Test
982	Saveing which test data?
983	Step response
984	Save to
985	Save to which?
986	Criteria
987	Total stroke setting value.
988	Total direction change setting value.
989	Low position time setting value.
990	Temperature unit code
991	Max. temp. time
992	Max temperature time setting value.
993	Min. temp. time
994	Min temperature time setting value.
995	Password Status
996	Password
997	03u
998	password flag
999	Password NG
1000	Password OK
1001	PST online enable
1002	Stroke size
1003	Completion stroke
1004	Start stroke
1005	Start time limit
1006	Abort time limit
1007	Time limit for aborting
1008	Abort pressure
1009	pressure limit for aborting
1010	Interval day
1011	Tset interval days
1012	day(s)
1013	Direction
1014	Stroke direction
1015	- minus
1016	+ plus
1017	Invalid value (Stroke size)
1018	Invalid value (Completion stroke)
1019	Invalid value (Start stroke)
1020	Invalid value (Start time limit)
1021	Invalid value (Abort time limit)
1022	Invalid value (Abort pressure)
1023	Invalid value (Interval day)
1024	PST status
1025	Waiting(Stop)
1026	Running
1027	Temporal running by LCD&SW
1028	Temporal running by HART
1029	PST flag
1030	Remaining days
1031	Remaining days to start PST
1032	Input Signal Cal. Setting 4mA
1033	Input Signal(4-20mA) calibration setting 4mA side
1034	04X
1035	Input Signal Cal. Setting 20mA
1036	Input Signal(4-20mA) calibration setting 20mA side
1037	Pressure Sensor
1038	Pressure sensor selection.
1039	Pressure Unit
1040	Pressure unit for calibration setting.
1041	kPa
1042	psi
1043	bar
1044	Lower pressure value
1045	Lower pressure value for calibration.
1046	Upper pressure value
1047	Upper pressure value for calibration.
1048	Lower pressure AD-value (HEX)
1049	Lower pressure AD-value for calibration.
1050	Upper pressure AD-value (HEX)
1051	Upper pressure AD-value for calibration.
1052	balance air lower limit
1053	Balance air lower limit value for pilot relay adjust.
1054	balance air upper limit
1055	Balance air upper limit value for pilot relay adjust.
1056	Input Signal Cal. Set flag
1057	Input signal(4-20mA) calibration set flag
1058	4mA-Side
1059	20mA-Side
1060	Lower or Upper side
1061	Lower or upper side pressure calibration point
1062	Lower side
1063	Upper side
1064	Pressure calibration value
1065	Pressure calibration setting value
1066	In I=
1067	AD value of input current.
1068	Pos S=
1069	AD value of position/sin signal
1070	C=
1071	AD value of position/cos signal
1072	Temp.
1073	AD value of temperature
1074	Air P1=
1075	AD value of supply pressure
1076	P2=
1077	AD value of pressure out-1
1078	P3=
1079	AD value of pressure out-2
1080	Data_Save_Restore_Execution_Code
1081	Alarm Clear Check Code
1082	Invalid request
1083	Position Transmitter Setting Mode
1084	Position transmitter signal setting mode
1085	bit0 0=Exit 1=Enter
1086	bit4 0=0%side 1=100%side
1087	Position Transmitter Adjust
1088	Position transmitter adjust(raw value)
1089	Set or Adjust?
1090	Position transmitter set or adjust flag
1091	adjust
1092	set
1093	Position Transmitter Set Value
1094	Position transmitter set value(raw value)
1095	Signal Setting:Position = 0%
1096	Position transmitter signal setting:Position = 0%
1097	Signal Setting:Position = 100%
1098	Position transmitter signal setting:Position = 100%
1099	Date
1100	Date of time stamp
1101	Time of time stamp
1102	Max temperature
1103	Min temperature
1104	Min/Max pressure
1105	Local pressure unit
1106	High sup-pres. alarm setting.
1107	Low sup-pres. alarm setting
1108	Sup-pres. alarm reserve flag
1109	Value
1110	High supply-pressure alarm setting value.
1111	Low supply-pressure alarm setting value.
1112	Password (000-999)
1113	Positioner :
1114	Electronics:
1115	Software :
1116	Versions Write Control flag
1117	Versions write control flag
1118	Positioner version
1119	Electronics version
1120	Software version
1121	Manufacture Date
1122	Manufacture date value (mm/dd/yyyy)
1123	Step time setting for 25% step response test
1124	Step time setting for pneumatic span test
1125	Criteria setting value for pneumatic span test
1126	Ramp time
1127	Ramp time setting for pneumatic drift test
1128	Tolerance
1129	Tolerance setting value for pneumatic drift test
1130	Ramp time setting for valve signature test
1131	Hysteresis limit
1132	Hysteresis limit setting value for valve signature test
1133	Gradient limit H
1134	Gradient high limit setting value for valve signature test
1135	Gradient limit L
1136	Gradient low limit setting value for valve signature test
1137	Air-Out
1138	IP signal lower limit value
1139	Air-In
1140	IP signal upper limit value
1141	Factor
1142	IP signal factor value
1143	IP Signal Output Mode
1144	Torquemotor current mode
1145	Forced output
1146	Temp. correcton
1147	IP Signal Value
1148	Set IP signal value
1149	3u
1150	Virtual SW1
1151	Virtual SW1 setting
1152	bit0
1153	bit1
1154	PID P value x0.1 mode
1155	bit2
1156	bit3
1157	bit4
1158	bit5
1159	PID D value x10 mode
1160	bit6
1161	bit7
1162	Position sensor signal reverse
1163	Virtual SW2
1164	Virtual SW2 setting
1165	bit8
1166	bit9
1167	bit10
1168	bit11
1169	bit12
1170	bit13
1171	bit14
1172	bit15
1173	p
1174	Present p term value
1175	i
1176	Present i term value
1177	Present d term value
1178	BIAS value
1179	Present BIAS value
1180	Present IP signal
1181	25
1182	75
1183	BIAS value for 25% point
1184	BIAS value for 75% point
1185	Offline
1186	Diag. setup
1187	Upload to Device
1188	Download From Device
1189	device icon
1190	PV Analog Channel Saturated
1191	PV Analog Channel Fixed
1192	Wireless
1193	WirelessHART Device
1194	IEEE 802.15.4 2.4GHz DSSS with O-QPSK Modulation
1195	Primary
1196	Primary Analog Channel
1197	Secondary
1198	Secondary Analog Channel
1199	Tertiary
1200	Tertiary Analog Channel
1201	Quaternary
1202	Quaternary Analog Channel
1203	Quinary
1204	Quinary Analog Channel
1205	Critical Power Failure
1206	Lock all
1207	Trim not supported
1208	Configuration cannot be changed
1209	Locked by gateway
1210	Analog Input Channel
1211	Analog Output Channel
1212	Secondary Analog Channel Saturated
1213	Tertiary Analog Channel Saturated
1214	Quaternary Analog Channel Saturated
1215	Quinary Analog Channel Saturated
1216	Secondary Analog Channel Fixed
1217	Tertiary Analog Channel Fixed
1218	Quaternary Analog Channel Fixed
1219	Quinary Analog Channel Fixed
1220	Simulation active
1221	The device is in simulation mode and the level output is not representative of the process.
1222	Non-Volatile memory failure
1223	The Non-Volatile memory check is invalid or maybe corrupt, or the battery of a battery-backed memory has failed.
1224	Volatile memory error
1225	The RAM memory check is invalid or maybe corrupt
1226	Watchdog reset executed
1227	A watchdog reset has been performed
1228	Voltage conditions out of range
1229	A voltage condition is outside its allowable range
1230	Environmental conditions out of range
1231	An internal or environmental condition is beyond acceptable limits.
1232	Electronic failure
1233	A hardware problem not related to the sensor has been detected.
1234	Subdevice list changed
1235	Duplicate master detected
1236	Capacity Denied
1237	The device was unable to acquire the communication bandwidth required to support the Burst Messaging specified
1238	Bandwidth allocation pending
1239	Block transfer pending
1240	Battery life
1241	Percent range
1242	Loop current
1243	Primary variable
1244	Secondary variable
1245	Tertiary variable
1246	Quaternary variable
1247	Read receive time
1248	Write date and time
1249	Non-Volatile Clock
1250	When set the device contains a battery-backed clock. In this case, the clock does not need to be reset if there is a power failure.
1251	Clock Uninitialized
1252	The real-time clock has never been set with the date and time. For example, the clock is volatile and power was removed from and restored to the device.
1253	None
1254	No restrictions
1255	SI Only
1256	Restricted to SI Unit codes only
1257	Process automation device
1258	Discrete device
1259	Hybrid:Process automation+discrete
1260	I/O System
1261	WirelessHART Process automation device
1262	WirelessHART Discrete device
1263	WirelessHART Process automation+discrete
1264	WirelessHART Gateway
1265	WirelessHART Access point
1266	WirelessHART Process adapter
1267	WirelessHART Discrete adapter
1268	WirelessHART enabled handheld/portable maintenance tool
1269	Device Profile
1270	US
1271	United States of America
1272	JP
1273	Japan
1274	DE
1275	Germany
1276	FR
1277	France
1278	ES
1279	Spain
1280	RU
1281	Russian Federation
1282	CN
1283	People's Republic of China
1284	Secondary Master
1285	Primary Master
1286	Device Diagnostic Status 0
1287	Device Diagnostic Status 1
1288	I/O and Subdevice Status
1289	WirelessHART Status
1290	Time Set Option
1291	Real Time Clock Flags
1292	Country
1293	Country of intended device installation
1294	SI Unit Control
1295	Indicates if device should only display SI unit codes
1296	Time Stamp
1297	Relative time value on network
1298	8u
1299	Dynamic Variables Returned for Device Variables
1300	Command Response Truncated
1301	Configuration Change Counter Mismatch
1302	Status bytes mismatch
1303	count
1304	Device Variable
1305	8.3f
1306	.3f
1307	Invalid cotrol mode !!
1308	You are aborting an operation.
1309	Operation aborted.
1310	Please, enter the password to open 'Protected Menu' !!
1311	Password is OK! To open 'Protected Menu', once closing the menu, and open again.
1312	Password is wrong!! You can not open the Protected Menu.
1313	Please, enter the password to open 'Protected menus' !!
1314	Password is OK.
1315	Password is wrong!! You can not open 'Protected menus'.
1316	You are abroting autotune.
1317	Aborting method due to last error
1318	Autotune is canceled.
1319	Method is aborting
1320	Only it can be set when Transfer-func is Equal percent.
1321	Do you want to read or write?
1322	Read;Write
1323	Actuator motion = %{0}
1324	Invalid authority !!
1325	Actuator motion :
1326	Invalid selecltion !! 'rotary' is selected for '5300' type.
1327	Actuator type = %{0}
1328	Actuator type :
1329	Single;Double;5300
1330	Invalid selecltion !! '5300' is selected for 'Rotary' motion.
1331	Unknown type error!!
1332	Valve action = %{0}
1333	Valve action :
1334	Packing friction = %{0}
1335	Packing friction :
1336	Booster option = %{0}
1337	This option can not be changed.
1338	Set point dir. = %{0}
1339	Set point dir. :
1340	Posi. transmit. dir. = %{0}
1341	Posi. transmit. dir. :
1342	You are to start Full Autotune.
1343	Full-Autotune is started.
1344	Setting process aborted!
1345	Aborting method due to last error %{stage}
1346	Ok(set);Move -;Move +
1347	menu_select
1348	Unknown error!!
1349	Setting comlpete!
1350	Aborting method due to last error.
1351	You are to start Span-Autotune.
1352	Span-Autotune is started.
1353	Response tuning = %{0}
1354	Response tuning value:
1355	Which ?
1356	Custom;XS;SS;S;M;L;LL;XL
1357	Custom;M;L;LL;XL
1358	Custom;SS;S;M;L;LL
1359	Custom;SS;S;M;L
1360	P =
1361	I =
1362	D =
1363	rP =
1364	rI =
1365	rD =
1366	Inside P =
1367	Inside I =
1368	Inside D =
1369	Inside rP =
1370	Inside rI =
1371	Inside rD =
1372	You are to start auto bias & size tuning.
1373	Sensitivity-Autotune is started.
1374	You are to start auto bias tuning.
1375	Bias-Autotune is started.
1376	Cutoff/Limit for 0%-side:
1377	Disable;Cutoff;Limit
1378	Value for 0%-side:
1379	Cutoff/Limit for 100%-side:
1380	Value for 100%-side:
1381	Dead band flag
1382	Disable;Enable
1383	Dead band value
1384	Transfer Function:
1385	Linear;Equal-Percent(low);Equal-Percent(Mid);Equal-Percent(High);Quick-Open;Custom-Definition
1386	Do you want to Read or Write?
1387	You are to Write Custom Curve data.
1388	Table Index is: %{c_no_puls}. Is this used?
1389	Enable;Disable
1390	X%{c_no_puls} =
1391	Y%{c_no_puls} =
1392	Writing is completed.
1393	Rage ability =
1394	Input damper flag:
1395	Input damper factor:
1396	Min =
1397	Max =
1398	PT burnout dir. =
1399	AT span limit =
1400	Log Clear: You are to reset diagnosis data.
1401	Log Clear is completed.
1402	Authority :
1403	Control mode :
1404	4-20mA;HART
1405	You want to set password =
1406	You are setting password, don't forget the password!!
1407	Password(000-999) =
1408	work_password
1409	Password is set.
1410	Password will be disabled!!
1411	Screen saver =
1412	Temperature unit :
1413	Aborting method due to temperature unit select error
1414	Pressure unit :
1415	Aborting method due to pressure unit select error
1416	You are perfomrimg input signal calibration.
1417	Set input signal 4.0mA.
1418	Set input signal 20.0mA.
1419	Input signal calibration is completed.
1420	You are perfomrimg corss point calibration.
1421	Ok(set);Down;Up
1422	You are perfomrimg Position Transmitter Calibration
1423	Ok(Return);0%-side;100%-side;
1424	select_menu
1425	Position Transmitter Calibration is done
1426	Ok;Down;Up
1427	You are perfomrimg pressure sensor calibration
1428	Pressure sensor cal.
1429	Set pressure for lower side
1430	Enter pressure value for lower side( %{pressure_calibration_setting_unit} ) :
1431	fwork
1432	Set pressure for upper side
1433	Enter pressure value for upper side ( %{pressure_calibration_setting_unit} ) :
1434	Set Value to Move
1435	Ok(Return);100%-side;0%-side;
1436	You are to perform ramp operation.
1437	Ramp operation is started.
1438	You are to perform step operation.
1439	Step operation is started.
1440	You are to perform data save.
1441	Data save is completed.
1442	You are to perform data restore.
1443	Data restore is completed.
1444	You are setting factory default data. Present setting data will be override.
1445	Present data will be override by factory default data. Are you sure?
1446	Set data to factory default is completed.
1447	Factory menu :
1448	Is the device armed? If no devices are armed, communication will be losted!!
1449	TAG
1450	Descriptor
1451	Long Tag
1452	Message
1453	Final asmbly num
1454	Reset is completed.
1455	0% side:
1456	iwork_l
1457	100% side:
1458	iwork_h
1459	Read;Write;Erace log
1460	You are reaceing log of total stroke!!
1461	You are reaceing log of total direction change!!
1462	You are reaceing log of low position!!
1463	You are reaceing log of max/min temperature!!
1464	You are clearing diagnosis logs.
1465	You are performing 25% step response.
1466	You are performing pneumatic span test.
1467	You are performing pneumatic drift test.
1468	You are performing simple valve signature.
1469	You are performing PST manually.
1470	Lo alarm :
1471	Lo alarm =
1472	item_low
1473	Hi alarm :
1474	Hi alarm =
1475	item_high
1476	Deviation alarm:
1477	Deviation alarm threshold =
1478	item_value_1
1479	times =
1480	item_value_2
1481	Temperature alarm:
1482	High sup-pres. AL:
1483	Value=
1484	Low sup-pres. AL:
1485	Pressure failure:
1486	Please, enter the password
1487	Password is wrong!!
1488	Position alarm NAMUR status :
1489	Deviation alarm NAMUR status :
1490	Temperature alarm NAMUR status :
1491	High sup-pressure NAMUR status :
1492	Low sup-pressure NAMUR status :
1493	Save as :
1494	Save as :
1495	Ramp operation is about to start. Do you want to continue?
1496	Yes;No
1497	Updating graph data will take time. Please wait till next message...
1498	Updating graph data is completed. Please exit method to see the updated graph
1499	Clearing graph data will take time. Please wait till next message...
1500	Clearing graph data is completed. Please exit method to see the cleared graph
Reference ID	String