Device dictionary

Loading…

Reference ID	String
0	FMU861
1	TAG NUMBER 1
2	HARDWARE ERROR ERROR NO. 111
3	HARDWARE ERROR ERROR NO. 112
4	HARDWARE ERROR ERROR NO. 113
5	HARDWARE ERROR ERROR NO. 114
6	HARDWARE ERROR ERROR NO. 115
7	CHECKSUM ERROR REFER TO OPERATING MANUAL ERROR NO. 106
8	CHECKSUM ERROR REFER TO OPERATING MANUAL ERROR NO. 116
9
10	WRONG VALUE ANOLOG OUTP. ADJUST CHANNEL 1 ERROR NO. 121
11	WRONG VALUES ANALOG OUTP. ADJUST CHANNEL 2 ERROR NO. 122
12	OPERATING MODE SIMULATION CHANNEL 1 WARNING NO. 613
13	OPERATING MODE SIMULATION CHANNEL 2 WARNING NO. 614
14	SELECTION TYPE OF SENSOR CHANNEL 1 WARNING NO. 501
15	SELECTION TYPE OF SENSOR CHANNEL 2 HINWEIS NO. 502
16	LINEARIZATION CHAN.1 FAILURE WARNING NO. 601
17	LINEARIZATION CHAN.2 FAILURE WARNING NO. 602
18	FAULT SENSOR (-CONNECTION) CHANNEL 1 ERROR NO. 231
19	FAULT SENSOR (-CONNECTION) CHANNEL 2 ERROR NO. 232
20	SHORTCUT, CHECK EXT. TEMP. PROBE ERROR NO. 250
21	INTERRUPT, CHECK EXT. TEMP. PROBE ERROR NO. 260
22	INTERRUPT, CHECK TEMPERATURE PROBE CHANNEL 1 ERROR NO. 261
23	INTERRUPT, CHECK TEMPERATURE PROBE CHANNEL 2 ERROR NO. 262
24	SIGNAL NOT USABLE CHANNEL 1 ERROR NO. 641
25	SIGNAL NOT USABLE CHANNEL 2 ERROR NO. 642
26	MEASURED VALUES DIFF CHAN. 1 - CHAN. 2 TOO LARGE ERROR NO. 643
27	TEMPERATURE TO HIGH CHANNEL 1 ERROR NO. 661
28	TEMPERATURE TO HIGH CHANNEL 2 ERROR NO. 662
29	COUNT FACTORS SHIFTED WARNING NO. 620
30	ADAPT COUNTER UNIT WARNING NO. 621
31	LINEARIZATION CHAN.1 FAILURE WARNING NO. 603
32	MATRIX GROUP SEL.
33	hl
34	t/s
35	MEASURED VALUE
36	3d
37	VMAX/QMAX
38	Hold
39	VH78-0
40	NONE
41	MIN 1 MAKER
42	MAX 1 MAKER
43	MIN 1 BREAKER
44	MAX 1 BREAKER
45	DUMMY UNIT
46	COUNT FACTOR 1
47	6.3f
48	COUNT FACTOR 2
49	COUNT FACTOR 3
50	INPUT LEVEL CH1
51	INPUT VOLUME CH1
52	LINE NO. CHAN. 1
53	POINT 1
54	POINT 2
55	POINT 3
56	POINT 4
57	POINT 5
58	POINT 6
59	POINT 7
60	POINT 8
61	POINT 9
62	POINT 10
63	POINT 11
64	POINT 12
65	POINT 13
66	POINT 14
67	POINT 15
68	POINT 16
69	POINT 17
70	POINT 18
71	POINT 19
72	POINT 20
73	POINT 21
74	POINT 22
75	POINT 23
76	POINT 24
77	POINT 25
78	POINT 26
79	POINT 27
80	POINT 28
81	POINT 29
82	POINT 30
83	POINT 31
84	POINT 32
85	FAC STEP WIDTH
86	FAC INCREASE
87	OFF
88	ON
89	VH74-1
90	send_lin_info
91	send_automatic_info
92	ABORT DYNAMIC
93	VH72-0
94	VH76-0
95	LAST DIAGNOSTIC
96	L.B.ONE DIAGNOST.
97	SIM. LEVEL
98	SIM. VALUE
99	SIM. CURRENT
100	EDIT MAN. TABLE
101	DEVICE DATA
102	HART OUTPUT
103
104	Offline
105	Var. Number
106	CHANNEL NUMBER
107	FMU860
108	DT
109	DVC
110	FCX
111	AS800
112	340T
113	340C
114	344
115	Siemens Micro K
116	SITRANS L
117	SIPAN PH
118	SITRANS P
119	75SMT
120	UNIDELTA
121	8320
122	SX5100
123	TSV175
124	DMU
125	3780
126	BM70
127	8u
128	CALIBR. CHAN 1
129	RELAYS
130	LINEARIZ. CHAN 1
131	ECHO PARAM CHAN 1
132	SERVICE 0
133	SERVICE 1
134	SERVICE 2
135	SERVICE 3
136	SERVICE
137	BASIC CONFIG
138	SERVICE/SIMULATE
139	SETUP
140	CONFIGURE
141	HotKey
142	Percent Range
143	%
144	6.1f
145	Sens. Upp. Lim.
146	Sens. Low. Lim.
147	Min. Span
148	Sensor SN
149	7d
150	Current
151	mA
152	Distance_format 1
153	6.0f
154	6.2f
155	Volume format 1
156	RELAY MASK
157	MENU UNUSED
158	ALL UNITS
159	%
160	l
161	m3
162	m
163	dm
164	cm
165	ft3
166	kg
167	t
168	ft
169	Us gal
170
171	l/s
172	l/min
173	l/h
174	m3/s
175	m3/min
176	m3/h
177	igps
178	igpm
179	igph
180	ugps
181	ugpm
182	ugph
183	kg/s
184	kg/min
185	kg/h
186	t/min
187	t/h
188	mgd
189	cfs
190	VAL1
191	6.4f
192	EMPTY CALIBRATION
193	FULL CALIBRATION
194	APPLICATION
195	LIQUID
196	LIQIUD_FAST
197	FINE_SOLIDS
198	COARS_SOLIDS
199	CONVEY. BELT
200	TYPE OF SENSOR
201	FDU 80
202	FDU 81
203	FDU 82
204	FDU 83
205	FDU 84
206	FDU 85
207	FDU 86
208	VALUE FOR 0/4 mA
209	VALUE FOR 20 mA
210	OUTPUT DAMPING
211	s
212	MEAS. DISTANCE
213	MEASURED LEVEL
214	SELECT. RELAY
215	REL.1 FUNCTION
216	LIMIT VALUE CH 1
217	TENDENCY CH 1
218	COUNT. PULSE 1
219	COUNT. PULSE 2
220	COUNT. PULSE 3
221	INTERVAL TIMER
222	ALARM RELAY
223	REL.1 SWITCH-ON
224	REL.1 SWITCH-OFF
225	REL.1 ALTERN.
226	Off
227	On
228	REL.2 FUNCTION
229	REL.2 SWITCH-ON
230	REL.2 SWITCH-OFF
231	REL.2 ALTERN.
232	REL.3 FUNCTION
233	REL.3 SWITCH-ON
234	REL.3 SWITCH-OFF
235	REL.3 ALTERN.
236	REL.4 FUNCTION
237	REL.4 SWITCH-ON
238	REL.4 SWITCH-OFF
239	REL.4 ALTERN.
240	REL.5 FUNCTION
241	REL.5 SWITCH-ON
242	REL.5 SWITCH-OFF
243	REL.5 ALTERN.
244	INTERVAL TIME
245	min
246	4d
247	SWITCH DELAY
248	LINEARIZATION
249	LINEAR
250	HORIZ. CYL.
251	Q/H-CURVE
252	MANUAL
253	AUTOMATIC
254	CANCEL
255	ACTUAL LEVEL
256	Q/H-CURVE
257	2d
258	CYLINDER DIAMETER
259	CYLINDER VOLUME
260	LOW FLOW CUTOFF
261	WEIR WIDTH
262	ACTIVATE SORTING
263	START
264	SUPPR. DET. ECHO
265	ECHO ATTENUATION
266	dB
267	SIGN/NOISE RATIO
268	IF NO ECHO:
269	WARNING
270	ALARM
271	SAFETY ALARM
272	-10 %
273	110 %
274	ENVELOPE STATIS.
275	VH71-0
276	deg. C
277	VH73-0
278	VH74-0
279	VH75-0
280	VH77-0
281	VH79-0
282	SENSOR DATA 1
283	7.3f
284	SENSOR DATA 2
285	SENSOR DATA 3
286	SENSOR DATA 4
287	SENSOR DATA 5
288	SENSOR DATA 6
289	SENSOR DATA 7
290	SENSOR DATA 8
291	SENSOR DATA 9
292	SENSOR DATA 10
293	kHz
294	4.1f
295	SENSOR DATA 11
296	SENSOR DATA 12
297	SENSOR DATA 13
298	SENSOR DATA 14
299	SENSOR DATA 15
300	5d
301	SENSOR DATA 16
302	SENSOR DATA 17
303	SENSOR DATA 18
304	5.3f
305	SENSOR DATA 19
306	SENSOR TABLE Nr.
307	VH77-1
308	VH71-2
309	VH72-2
310	VH73-2
311	VH74-2
312	VH75-2
313	VH76-2
314	VH77-2
315	VH78-2
316	VH79-2
317	VH71-3
318	VH72-3
319	VH73-3
320	VH74-3
321	m/s
322	VH75-3
323	m/s/K
324	VH76-3
325	%/min
326	VH77-3
327	VH78-3
328	VH79-3
329	OPERATING MODE
330	LEVEL
331	FLOW
332	SIMULATION CH 1
333	SELECT CURRENT
334	0..20mA
335	4..20mA
336	MIN. CURRENT 4mA
337	SELECT DIST. UNIT
338	m
339	ft
340	FLOW UNIT
341	COUNT UNIT
342	i gal
343	us gal
344	bls
345	inch3
346	LIMIT SWITCH
347	MIN CHANNEL 1
348	MAX CHANNEL 1
349	EXT. TEMP. SENSOR
350	NONE
351	CHANNEL 1
352	INT. COUNTER HIGH
353	INT. COUNTER LOW
354	DIAGNOSTIC CODE
355	INSTR.&SOFTW.NO
356	RESET_COUNTER
357	DEFAULT VALUES
358	SECURITY LOCKING
359	UNIT AFTER LIN. 1
360	FUNCTION
361	SWITCH-ON
362	SWITCH-OFF
363	ALTERN.
364	REL.1
365	REL.2
366	REL.3
367	REL.4
368	REL.5
369	SENSOR DATA 10
370	Please press SEND-Key to switch to automatic linearization
371	Please press SEND-Key now to prevent errors.
372	Please press SEND-Key now to transmit values
373	TO PREVENT ERRORS, VALUE SHOULD BE SEND TO THE FIELD DEVICE SEND VALUE?
374	YES;NO
375	IMPORTANT! YES WILL CHANGE THE FIELD DEV. IMMEDIATLY RESET VALUE?
376	VH71-0 %{0} deg. C
377	VH76-0 %{0} dB
378	LAST DIAGNOSTIC %{0}
379	L.B.ONE DIAGNOST. %{0}
380	Aborting method due to last error
381	SELECT LINE NO.
382	INPUT LEVEL
383	INPUT VOLUME
Reference ID	String