| 0 |
VFGVF-100 |
| 1 |
Volumetric Flow Rate |
| 2 |
VF |
| 3 |
Volumetric Flow Rate Units |
| 4 |
VF Sensor Units |
| 5 |
Volumetric Flow Rate Upper Limit
Maximum rate at which the meter will display and totalize. |
| 6 |
VF Highcut |
| 7 |
.2f |
| 8 |
8.2f |
| 9 |
Volumetric Flow Rate Lower Limit
Manimum rate at which the meter will display and totalize. |
| 10 |
VF Lowcut |
| 11 |
flowRate PDQ |
| 12 |
flowRate Fmly stat |
| 13 |
flowRate LS |
| 14 |
Vortical Flow Rate |
| 15 |
Vortical Flow Rate Units |
| 16 |
4-20mA Channel 1 Output |
| 17 |
High Cutoff |
| 18 |
Low Cutoff |
| 19 |
Sensor Head Serial Number |
| 20 |
Total Volumetric Flow |
| 21 |
Total |
| 22 |
Volumetric Flow Total Units |
| 23 |
TOT Sensor Units |
| 24 |
totalizer PDQ |
| 25 |
totalizer LS |
| 26 |
Totalizer Fmly stat |
| 27 |
Total Flow Units |
| 28 |
Total Flow |
| 29 |
True Liquid Flow |
| 30 |
TLF |
| 31 |
True Liquid Flow Units |
| 32 |
TLF Units |
| 33 |
TLF PDQ |
| 34 |
TLF LS |
| 35 |
TLF Fmly stat |
| 36 |
Gas Volume Fraction |
| 37 |
GVF |
| 38 |
Gas Volume Fraction Units |
| 39 |
GVF Units |
| 40 |
GVF PDQ |
| 41 |
GVF LS |
| 42 |
GVF Fmly stat |
| 43 |
4-20mA Output |
| 44 |
4-20mA |
| 45 |
.3f |
| 46 |
8.3f |
| 47 |
VF High Cutoff |
| 48 |
7d |
| 49 |
VF Low Cutoff |
| 50 |
VF Total |
| 51 |
Test Results |
| 52 |
Sensor 1 Result |
| 53 |
Disconnected |
| 54 |
--OFF-- |
| 55 |
Test Failed |
| 56 |
PASS |
| 57 |
Switch Wht/Blk Connection at Transmitter |
| 58 |
Swapped with Sensor #2 |
| 59 |
Swapped with Sensor #3 |
| 60 |
Swapped with Sensor #4 |
| 61 |
Swapped with Sensor #5 |
| 62 |
Swapped with Sensor #6 |
| 63 |
Swapped with Sensor #7 |
| 64 |
Swapped with Sensor #8 |
| 65 |
Sensor 2 Result |
| 66 |
Swapped with Sensor #1 |
| 67 |
Sensor 3 Result |
| 68 |
Sensor 4 Result |
| 69 |
Sensor 5 Result |
| 70 |
Sensor 6 Result |
| 71 |
Sensor 7 Result |
| 72 |
Sensor 8 Result |
| 73 |
Sensor Test Results |
| 74 |
Final Test Result |
| 75 |
Sensor 1 |
| 76 |
Sensor 2 |
| 77 |
Sensor 3 |
| 78 |
Sensor 4 |
| 79 |
Sensor 5 |
| 80 |
Sensor 6 |
| 81 |
Sensor 7 |
| 82 |
Sensor 8 |
| 83 |
Sensor Test |
| 84 |
Perform diagnostics to confirm continuity and phase of the Transmitter to Sensor Head connections. |
| 85 |
Write Control |
| 86 |
Disabled |
| 87 |
Enabled |
| 88 |
Reset Totalizer |
| 89 |
Running |
| 90 |
Reset |
| 91 |
Clear Alarm |
| 92 |
Clear |
| 93 |
Clear History |
| 94 |
Parameter Invalid |
| 95 |
Transmitter Serial Number |
| 96 |
Transmitter Model Number |
| 97 |
Transmitter Software Revision |
| 98 |
Alchemy Software Revision |
| 99 |
Sensorhead Serial Number |
| 100 |
Preamp Software Revision |
| 101 |
Preamp Serial Number |
| 102 |
Pipe Diameter Select |
| 103 |
Pipe Diameter Input Selection |
| 104 |
Inside Diameter |
| 105 |
Size / Schedule |
| 106 |
Outside Diameter / Wall |
| 107 |
Pipe Diameter Units |
| 108 |
in |
| 109 |
mm |
| 110 |
Pipe OD Wall Units |
| 111 |
Pipe Outside Diameter Wall Units |
| 112 |
Pipe Size/Schedule Size |
| 113 |
Pipe Size/Schedule Size Selection |
| 114 |
2 |
| 115 |
2.5 |
| 116 |
3 |
| 117 |
3.5 |
| 118 |
4 |
| 119 |
5 |
| 120 |
6 |
| 121 |
8 |
| 122 |
10 |
| 123 |
12 |
| 124 |
14 |
| 125 |
16 |
| 126 |
18 |
| 127 |
20 |
| 128 |
22 |
| 129 |
24 |
| 130 |
26 |
| 131 |
28 |
| 132 |
30 |
| 133 |
32 |
| 134 |
34 |
| 135 |
36 |
| 136 |
Pipe Size/Schedule Schedule |
| 137 |
Pipe Size/Schedule Schedule Selection |
| 138 |
5S |
| 139 |
10S |
| 140 |
40 |
| 141 |
40S |
| 142 |
60 |
| 143 |
80 |
| 144 |
80S |
| 145 |
STD |
| 146 |
XS |
| 147 |
SOS Pipe Wall Thickness Units |
| 148 |
SOS Pipe Wall Thickness Units Selection |
| 149 |
SOS Pipe Modulus Select |
| 150 |
SOS Pipe Modulus Selection |
| 151 |
SS |
| 152 |
Steel |
| 153 |
PVC |
| 154 |
Custom |
| 155 |
Pipe Inside Diameter |
| 156 |
Pipe Outside Diameter |
| 157 |
Pipe Wall Thickness |
| 158 |
SOS Pipe Wall Thickness |
| 159 |
SOS Pipe Modulus |
| 160 |
SOS Gas Constant Select |
| 161 |
SOS Gas Constant Selection |
| 162 |
Air Const |
| 163 |
SOS Specfic Gravity Select |
| 164 |
SOS Specfic Gravity Selection |
| 165 |
Water Const |
| 166 |
SOS Liquid Sound Speed Select |
| 167 |
SOS Liquid Sound Speed Selection |
| 168 |
Viscosity |
| 169 |
Pa�s |
| 170 |
11.4e |
| 171 |
SOS Gas Constant |
| 172 |
J/kg K |
| 173 |
SOS Specific Gravity |
| 174 |
Liquid Sound Speed |
| 175 |
SOS Polytropic Exponent |
| 176 |
SOS Liquid Density |
| 177 |
Temperature Input Select |
| 178 |
Fixed |
| 179 |
Pressure Input Select |
| 180 |
SOS Temperature Units |
| 181 |
C |
| 182 |
F |
| 183 |
SOS Pressure Units |
| 184 |
PSig |
| 185 |
kPAg |
| 186 |
BARg |
| 187 |
Altitude Units |
| 188 |
ft |
| 189 |
m |
| 190 |
SOS Temperature |
| 191 |
SOS Pressure |
| 192 |
Altitude |
| 193 |
Flow Volume Units |
| 194 |
User |
| 195 |
user |
| 196 |
Flow Time Units |
| 197 |
Custom Flow Volume Base Units |
| 198 |
Custom Flow Time Base Units |
| 199 |
GVF Display Decimal Places |
| 200 |
SOS Volume Units |
| 201 |
Flow Low Cutoff Percent |
| 202 |
Flow High Cutoff Percent |
| 203 |
Custom Volume Unit Multiplier |
| 204 |
Custom Time Unit Multiplier |
| 205 |
Flow Quality Delta |
| 206 |
SOS Quality Delta |
| 207 |
Custom Volume Label |
| 208 |
Custom Time Label |
| 209 |
System Config Mode |
| 210 |
SOS |
| 211 |
VF/SOS |
| 212 |
Update Rate |
| 213 |
Sensors In Use |
| 214 |
Write Protect |
| 215 |
Disable |
| 216 |
Enable |
| 217 |
Idle Timeout |
| 218 |
Ethernet Idle Timeout |
| 219 |
Transmitter Gain |
| 220 |
SPL Threshold |
| 221 |
SPL Average |
| 222 |
SPL Standard Deviation |
| 223 |
PreAmp Gain |
| 224 |
0 |
| 225 |
1 |
| 226 |
AGC Run Mode |
| 227 |
Charge Gain |
| 228 |
PreAmp Gain 0 |
| 229 |
PreAmp Gain 1 |
| 230 |
PreAmp Gain 2 |
| 231 |
PreAmp Gain 3 |
| 232 |
Sample Frequency |
| 233 |
Channel Skew |
| 234 |
Frequency Min |
| 235 |
Frequency Max |
| 236 |
Flow Min |
| 237 |
Flow Max |
| 238 |
Flow Min Quality |
| 239 |
Flow Nyquist High |
| 240 |
Flow Nyquist Low |
| 241 |
Flow Centroid Width |
| 242 |
Flow Velocity Search Limit Low |
| 243 |
Flow Velocity Search Limit High |
| 244 |
Flow Nyquist Init Value |
| 245 |
Decimation |
| 246 |
Flow Window Type |
| 247 |
Window Type |
| 248 |
Flow Detrend |
| 249 |
Flow Normalization |
| 250 |
Flow Differencing |
| 251 |
Flow Direction |
| 252 |
Flow Window Size Multiplier |
| 253 |
Flow Peak Search Mode |
| 254 |
Flow Operating Mode |
| 255 |
Flow Quality Mode |
| 256 |
Flow Data Length |
| 257 |
Flow Window Size |
| 258 |
Flow Window Overlap |
| 259 |
Flow Window Averages |
| 260 |
Flow Cal Coeffecient C0 |
| 261 |
Flow Cal Coeffecient C1 |
| 262 |
Flow Cal Coeffecient C2 |
| 263 |
SOS Sample Frequency |
| 264 |
SOS Frequency Minimum |
| 265 |
SOS Frequency Maximum |
| 266 |
SOS Minimum |
| 267 |
SOS Maximum |
| 268 |
SOS Minimum Quality |
| 269 |
SOS Centroid Width |
| 270 |
SOS Frequency Threshold |
| 271 |
SOS Minimum K |
| 272 |
SOS Maximum K |
| 273 |
SOS Search Limit |
| 274 |
SOS Lambda Diameter |
| 275 |
SOS Lambda Diametert |
| 276 |
SOS Total Data |
| 277 |
SOS Window Size |
| 278 |
SOS Window Overlap |
| 279 |
SOS Sub Array Size |
| 280 |
SOS Normalization |
| 281 |
SOS Differencing |
| 282 |
SOS Operating Mode |
| 283 |
SOS Selection Threshold |
| 284 |
SOS Min Frequency Points (Auto Freq) |
| 285 |
SOS Valid Frequency Points Right |
| 286 |
SOS Valid Frequency Points Left |
| 287 |
Sensor Input Scale 1 |
| 288 |
Sensor Input Scale 2 |
| 289 |
Sensor Input Offset 1 |
| 290 |
Sensor Input Offset 2 |
| 291 |
Sensor 1 Damping Tau |
| 292 |
Sensor 2 Damping Tau |
| 293 |
Sensor 1 Input Units |
| 294 |
None |
| 295 |
PSIg |
| 296 |
Sensor 2 Input Units |
| 297 |
Sensor 1 First Order Damping Filter Enable |
| 298 |
Sensor 2 First Order Damping Filter Enable |
| 299 |
Pressure Input Units |
| 300 |
Temperature Input Units |
| 301 |
Input 1 Units |
| 302 |
Input 2 Units |
| 303 |
Input 3 Units |
| 304 |
Flow Noise Reduction Filter Enable |
| 305 |
Flow Noise Reduction Filter Magnitude Select |
| 306 |
Low |
| 307 |
High |
| 308 |
Flow Damping Tau |
| 309 |
Flow First Order Damping Filter Enable |
| 310 |
Flow Spike Filter Percentage |
| 311 |
Flow Spike Filter Enable |
| 312 |
Flow Spike Filter No Flow Length |
| 313 |
Flow Spike Filter Length |
| 314 |
Flow Spike Filter Up Count |
| 315 |
Flow Spike Filter Down Count |
| 316 |
Flow Spike Filter Percent Window Length |
| 317 |
GVF Noise Reduction Filter Enable |
| 318 |
GVF Noise Reduction Filter Magnitude Select |
| 319 |
GVF Damping Tau |
| 320 |
GVF First Order Damping Filter Enable |
| 321 |
GVF Spike Filter Percentage |
| 322 |
GVF Spike Filter Enable |
| 323 |
GVF Spike Filter No Flow Length |
| 324 |
GVF Spike Filter Length |
| 325 |
GVF Spike Filter Up Count |
| 326 |
GVF Spike Filter Down Count |
| 327 |
GVF Spike Filter Percent Window Length |
| 328 |
Maximum Sensor Threshold |
| 329 |
Minimum Sensor Threshold |
| 330 |
Sensor 1 Location |
| 331 |
Sensor Spacing 1 - 2 |
| 332 |
Sensor Spacing 1 - 3 |
| 333 |
Sensor Spacing 1 - 4 |
| 334 |
Sensor Spacing 1 - 5 |
| 335 |
Sensor Spacing 1 - 6 |
| 336 |
Sensor Spacing 1 - 7 |
| 337 |
Sensor Spacing 1 - 8 |
| 338 |
Flow Quality |
| 339 |
Flow Rate (Unfiltered) |
| 340 |
Pressure |
| 341 |
Temperature |
| 342 |
SOS Quality |
| 343 |
SOS (Unfiltered) |
| 344 |
SOS Flow Rate |
| 345 |
SOS Flow Rate Quality |
| 346 |
Total True Liquid Flow |
| 347 |
True Liquid Flow (Unfiltered) |
| 348 |
Analog 4-20mA Input 1 |
| 349 |
Analog 4-20mA Input 2 |
| 350 |
Total Flow Fraction |
| 351 |
Total True Liquid Flow Fraction |
| 352 |
System Status |
| 353 |
08X |
| 354 |
Sensor Channel 1 Maximum |
| 355 |
Sensor Channel 2 Maximum |
| 356 |
Sensor Channel 3 Maximum |
| 357 |
Sensor Channel 4 Maximum |
| 358 |
Sensor Channel 5 Maximum |
| 359 |
Sensor Channel 6 Maximum |
| 360 |
Sensor Channel 7 Maximum |
| 361 |
Sensor Channel 8 Maximum |
| 362 |
Sensor Channel 1 Minimum |
| 363 |
Sensor Channel 2 Minimum |
| 364 |
Sensor Channel 3 Minimum |
| 365 |
Sensor Channel 4 Minimum |
| 366 |
Sensor Channel 5 Minimum |
| 367 |
Sensor Channel 6 Minimum |
| 368 |
Sensor Channel 7 Minimum |
| 369 |
Sensor Channel 8 Minimum |
| 370 |
Sensor Channel 1 Alpha |
| 371 |
Sensor Channel 2 Alpha |
| 372 |
Sensor Channel 3 Alpha |
| 373 |
Sensor Channel 4 Alpha |
| 374 |
Sensor Channel 5 Alpha |
| 375 |
Sensor Channel 6 Alpha |
| 376 |
Sensor Channel 7 Alpha |
| 377 |
Sensor Channel 8 Alpha |
| 378 |
SONARtrac Status 0 |
| 379 |
Alarm - Warning |
| 380 |
Alarm - Critical |
| 381 |
SONARtrac Status |
| 382 |
Re-range |
| 383 |
Control |
| 384 |
Device Information |
| 385 |
Pipe Information |
| 386 |
Fluid Properties |
| 387 |
Environment |
| 388 |
Display |
| 389 |
System |
| 390 |
System Dynamic |
| 391 |
PreAmp |
| 392 |
Flow Algorithm |
| 393 |
Flow Algorithm Dynamic |
| 394 |
Flow Calibration |
| 395 |
SOS Algorithm |
| 396 |
SOS Algorithm Dynamic |
| 397 |
Analog Section |
| 398 |
Input Units |
| 399 |
Flow Noise Reduction Filter |
| 400 |
Flow Damping Filter |
| 401 |
Flow Spike Filter |
| 402 |
GVF Noise Reduction Filter |
| 403 |
GVF Damping Filter |
| 404 |
GVF Spike Filter |
| 405 |
Sensor |
| 406 |
Sensor Spacing |
| 407 |
Measured Values |
| 408 |
Sensor Max Min |
| 409 |
Sensor Alpha |
| 410 |
PV Analog Channel Saturated |
| 411 |
PV Analog Channel Fixed |
| 412 |
Wireless |
| 413 |
WirelessHART Device |
| 414 |
IEEE 802.15.4 2.4GHz DSSS with O-QPSK Modulation |
| 415 |
Primary |
| 416 |
Primary Analog Channel |
| 417 |
Secondary |
| 418 |
Secondary Analog Channel |
| 419 |
Tertiary |
| 420 |
Tertiary Analog Channel |
| 421 |
Quaternary |
| 422 |
Quaternary Analog Channel |
| 423 |
Quinary |
| 424 |
Quinary Analog Channel |
| 425 |
Critical Power Failure |
| 426 |
Lock all |
| 427 |
Trim not supported |
| 428 |
Configuration cannot be changed |
| 429 |
Locked by gateway |
| 430 |
Analog Input Channel |
| 431 |
Analog Output Channel |
| 432 |
Secondary Analog Channel Saturated |
| 433 |
Tertiary Analog Channel Saturated |
| 434 |
Quaternary Analog Channel Saturated |
| 435 |
Quinary Analog Channel Saturated |
| 436 |
Secondary Analog Channel Fixed |
| 437 |
Tertiary Analog Channel Fixed |
| 438 |
Quaternary Analog Channel Fixed |
| 439 |
Quinary Analog Channel Fixed |
| 440 |
Simulation active |
| 441 |
The device is in simulation mode and the level output is not representative of the process. |
| 442 |
Non-Volatile memory failure |
| 443 |
The Non-Volatile memory check is invalid or maybe corrupt, or the battery of a battery-backed memory has failed. |
| 444 |
Volatile memory error |
| 445 |
The RAM memory check is invalid or maybe corrupt |
| 446 |
Watchdog reset executed |
| 447 |
A watchdog reset has been performed |
| 448 |
Voltage conditions out of range |
| 449 |
A voltage condition is outside its allowable range |
| 450 |
Environmental conditions out of range |
| 451 |
An internal or environmental condition is beyond acceptable limits. |
| 452 |
Electronic failure |
| 453 |
A hardware problem not related to the sensor has been detected. |
| 454 |
Subdevice list changed |
| 455 |
Duplicate master detected |
| 456 |
Capacity Denied |
| 457 |
The device was unable to acquire the communication bandwidth required to support the Burst Messaging specified |
| 458 |
Bandwidth allocation pending |
| 459 |
Block transfer pending |
| 460 |
Battery life |
| 461 |
Percent range |
| 462 |
Loop current |
| 463 |
Primary variable |
| 464 |
Secondary variable |
| 465 |
Tertiary variable |
| 466 |
Quaternary variable |
| 467 |
Read receive time |
| 468 |
Write date and time |
| 469 |
Non-Volatile Clock |
| 470 |
When set the device contains a battery-backed clock. In this case, the clock does not need to be reset if there is a power failure. |
| 471 |
Clock Uninitialized |
| 472 |
The real-time clock has never been set with the date and time. For example, the clock is volatile and power was removed from and restored to the device. |
| 473 |
No restrictions |
| 474 |
SI Only |
| 475 |
Restricted to SI Unit codes only |
| 476 |
Process automation device |
| 477 |
Discrete device |
| 478 |
Hybrid:Process automation+discrete |
| 479 |
I/O System |
| 480 |
WirelessHART Process automation device |
| 481 |
WirelessHART Discrete device |
| 482 |
WirelessHART Process automation+discrete |
| 483 |
WirelessHART Gateway |
| 484 |
WirelessHART Access point |
| 485 |
WirelessHART Process adapter |
| 486 |
WirelessHART Discrete adapter |
| 487 |
WirelessHART enabled handheld/portable maintenance tool |
| 488 |
Device Profile |
| 489 |
|
| 490 |
US |
| 491 |
United States of America |
| 492 |
JP |
| 493 |
Japan |
| 494 |
DE |
| 495 |
Germany |
| 496 |
FR |
| 497 |
France |
| 498 |
ES |
| 499 |
Spain |
| 500 |
RU |
| 501 |
Russian Federation |
| 502 |
CN |
| 503 |
People's Republic of China |
| 504 |
Secondary Master |
| 505 |
Primary Master |
| 506 |
Device Diagnostic Status 0 |
| 507 |
Device Diagnostic Status 1 |
| 508 |
I/O and Subdevice Status |
| 509 |
WirelessHART Status |
| 510 |
Time Set Option |
| 511 |
Real Time Clock Flags |
| 512 |
Country |
| 513 |
Country of intended device installation |
| 514 |
SI Unit Control |
| 515 |
Indicates if device should only display SI unit codes |
| 516 |
8u |
| 517 |
Dynamic Variables Returned for Device Variables |
| 518 |
Command Response Truncated |
| 519 |
Configuration Change Counter Mismatch |
| 520 |
Status bytes mismatch |
| 521 |
Output Status |
| 522 |
Output Status Byte |
| 523 |
Uninitialized |
| 524 |
Normal - one sensor |
| 525 |
Normal - two sensors |
| 526 |
Normal - three sensors |
| 527 |
Shorted |
| 528 |
Shorted- shorted field wiring. |
| 529 |
Limited high |
| 530 |
Limited high- block can not respond to upward movement of value. |
| 531 |
Open |
| 532 |
Open- open field wiring. |
| 533 |
Limited low |
| 534 |
Limited low- block can not respond to upward movement of target. |
| 535 |
Initialization done |
| 536 |
Initialization done- block initialization is complete. |
| 537 |
Not selected |
| 538 |
Not selected- target value provided by block was not selected. |
| 539 |
No path |
| 540 |
No path- there is no path to the process. |
| 541 |
Fail |
| 542 |
Fail- hardware failure. |
| 543 |
Bad |
| 544 |
Bad- block is out of service or has bad input. |
| 545 |
Not from process |
| 546 |
Not from process- value is not directly affected by any process information. |
| 547 |
Local override |
| 548 |
Local override- block has LO mode. |
| 549 |
Not Cascade Mode |
| 550 |
Not RCas Mode |
| 551 |
Not ROut Mode |
| 552 |
No communication |
| 553 |
No communication- (NO_COM). |
| 554 |
uint16_var_blk_char |
| 555 |
uint32_var_blk_char |
| 556 |
uint8_var_blk_char |
| 557 |
int8_var_blk_char |
| 558 |
new itest redef1 label |