Device dictionary

Loading…

Reference ID	String
0	82TE CONC
1	Two-Electrode Concentration Transmitter
2	ABB Instrumentation
3	EC1 HI.PV.AD
4	Process Variable A/D over range
5	EC2 LO.PV.AD
6	Process Variable A/D under range
7	EC3 PH.PCB
8	pH/ORP/pION input PCB with Conductivity/concentration firmware
9	EC4 TC.PCB
10	Toroidal conductivity input PCB with 2-electrode conductivity/concentration firmware
11	EC7 EC.PCB
12	Electrode conductivity input PCB with 2-electrode conductivity/concentration firmware
13	PC1 POLAR
14	Sensor Polarization detected
15	PC6 HI.LOOP
16	Current loop above upper range
17	PC7 LO.LOOP
18	Current loop below lower range value
19	PC8 HI.PV
20	PV above transmitter range
21	PC9 LO.PV
22	PV below transmitter range
23	PC10 HI.TEMP
24	Temperature above transmitter range
25	PC11 LO.TEMP
26	Temperature below transmitter range
27	PC12 HI.T.AD
28	Open or missing Temperature Sensor
29	PC13 LO.T.AD
30	Shorted Temperature Sensor
31	PC2O BAD.SEE
32	Bad SEEPROM or bad input PCB assembly
33	PC21 NO.F.CAL
34	Missing factory cal or nonfunctional SEEPROM
35	PC22 BLNK.EE
36	Blank microprocessor EEPROM
37	PC25 ROM.SUM
38	Incorrect EPROM checksum
39	PC30 R0.F.CAL
40	Out of range or missing factory cal for conductivity circuit range zero
41	PC31 R1.F.CAL
42	Out of range or missing factory cal for conductivity circuit range one
43	PC32 R2.F.CAL
44	Out of range or missing factory cal for conductivity circuit range two
45	PC33 R3.F.CAL
46	Out of range or missing factory cal for conductivity circuit range three
47	PC34 R4.F.CAL
48	Out of range or missing factory cal for conductivity circuit range four
49	PC35 G0.F.CAL
50	Out of range or missing factory cal for secondary process variable range zero
51	PC36 G1.F.CAL
52	Out of range or missing factory cal for secondary process variable range one
53	PC37 G2.F.CAL
54	Out of range or missing factory cal for secondary process variable range two
55	PC38 G3.F.CAL
56	Out of range or missing factory cal for secondary process variable range three
57	PC39 G4.F.CAL
58	Out of range or missing factory cal for secondary process variable range four
59	PC45 BA.F.CAL
60	Out of range or missing factory cal for 3-k ohm Balco temp.compensator
61	PC46 PT.F.CAL
62	Out of range or missing factory cal for PT100 temp. compensator
63	PC48 PK.F.CAL
64	Out of range or missing factory cal for PT1000 temp. compensator
65	PC50 R0.CHKS
66	Incorrect or missing conductivity circuit range zero checksum
67	PC51 R1.CHKS
68	Incorrect or missing conductivity circuit range one checksum
69	PC52 R2.CHKS
70	Incorrect or missing conductivity circuit range two checksum
71	PC53 R3.CHKS
72	Incorrect or missing conductivity circuit range three checksum
73	PC54 R4.CHKS
74	Incorrect or missing conductivity circuit range four checksum
75	PC55 G0.CHKS
76	Incorrect or missing secondary process variable range zero checksum
77	PC56 G1.CHKS
78	Incorrect or missing secondary process variable range one checksum
79	PC57 G2.CHKS
80	Incorrect or missing secondary process variable range two checksum
81	PC58 G3.CHKS
82	Incorrect or missing secondary process variable range three checksum
83	PC59 G4.CHKS
84	Incorrect or missing secondary process variable range four checksum
85	PC65 BA.CHKS
86	Incorrect or missing 3-k ohm Balco temp. compensator checksum
87	PC66 PT.CHKS
88	Incorrect or missing PT100 temp. compensator checksum
89	PC68 PK.CHKS
90	Incorrect or missing PT1000 temp. compensator checksum
91	PC70 HI.G.L.AD
92	Secondary process variable signal above transmitter A/D range
93	PC71 LO.G.L.AD
94	Secondary process variable signal below transmitter A/D range
95	PV LO OFFSET
96	PV calibration Offset too low
97	PV LO SLOPE
98	PV calibration Slope too low
99	PV HI OFFSET
100	PV calibration Offset too high
101	PV HI SLOPE
102	PV calibration Slope too high
103	Temp Offset Warning
104	Temperature calibration Offset unacceptable
105	Temp Slope Warning
106	Temperature calibration Slope unacceptable
107	PV eng. unit
108	ppb
109	Parts per Billion
110
111	Concentration - Field Device Variable Digital value that changes magnitude with respect to time with no user intervention.
112	.3f
113	.2f
114	8.2f
115	11.3f
116	8u
117	Temp Unit
118	Temperature- In Auto temp comp mode, it is the Temp read with the temp sensor. In Manual temp comp mode, it is the user entered temp value
119	In calibration security mode
120	Transmitter Busy - Cannot Process Command
121	10.3f
122	PV slope
123	PV sensor slope value
124	PV offset
125	PV sensor offset value.
126	Temperature sensor Slope
127	Temperature sensor offset
128	Temperature sensor offset value.
129	Conc cal value
130	Concentration calibration value
131	Temp. calibration value
132	Temperature calibration value
133	HART Parameters
134	Offline Configuration Parameters
135	PV Range Setup
136	Reset Transmitter
137	Reset Transmitter - Instructs the transmitter to generate a reset. The result is similar to the effects of briefly interrupting power to the transmitter. This can be used to recover from an error condition if needed.
138	Concentration cal
139	Calibration of process sensor input via one-point smart calibration that adjusts offset and slope.
140	Temp. Cal
141	Calibration of Temperature sensor input via one-point smart calibration that adjusts offset and slope
142	Edit Cal
143	Manual adjustment of process sensor and temperature offset and slope values
144	Reset Cal
145	Reset the process and temperature sensor calibration data to the values set at the factory
146	Refresh variables
147	Read transmitter variables to refresh their values. This will update any variable that was modified via the device keypad.
148	FMU860
149	DT
150	DVC
151	FCX
152	AS800
153	340T
154	340C
155	344
156	Siemens Micro K
157	SITRANS L
158	SIPAN PH
159	SITRANS P
160	75SMT
161	UNIDELTA
162	8320
163	SX5100
164	TSV175
165	DMU
166	3780
167	BM70
168	low
169	high
170	tmp_av
171	Transmitter will be Reset! Continue?
172	Transmitter Reset is in process, please wait.
173	Reading current values of all transmitter variables, please wait.
174	Transmitter Reset successful
175	Press OK when PV is stable %0 %{3}
176	Enter new value:
177	PV Slope: %{1} PV Offset: %{2} uS/cm
178	Calibration was not successful. Do you want to retry?
179	Calibration was successful
180	Enter Temperature:
181	TEMP OFFSET WARNING
182	TEMP SLOPE WARNING
183	Edit PV Slope
184	Edit PV Offset
185	Edit Temp. Slope
186	Edit Temp. Offset
187	Press OK to Reset Calibration
188	Reading transmitter variables, please wait.
Reference ID	String