Device dictionary

Loading…

Reference ID	String
0	50XM1000
1	50SM1000
2	50XM2000
3	10VT1000
4	50VM1000
5	D10A5480
6	Error register 1
7	Urefn too big
8	Excitation
9	MAX alarm
10	MIN alarm
11	Primary
12	Function test
13	Totalizer >F
14	Totalizer <R
15	Error register 2
16	Detec.e.pipe
17	A/D saturated
18	Uref too small
19	Flow > 130%
20	Zero return
21	EEPROM data
22	Totalizer
23	Urefp too big
24	Error register 3
25	Adjust System zero
26	Error: System zero
27	.3f
28	8.3f
29	Range unit
30	spcl/s
31	programable unit per second
32	spcl/min
33	programable unit per minute
34	spcl/h
35	programable unit per hour
36	spcl/day
37	programable unit per day
38	Totalizer Unit
39	spcl
40	programable unit
41	Flow Sensor- Hardware that measures flow rate.
42	Gross Total- Non-resettable totalizer.
43	Reverse Total- Non-resettable reverse totalizer.
44	4th
45	Status
46	Sensor
47	Sensor info
48	Sensor config
49	Detector e.pipe
50	Reset Totalizer
51	Pulse output
52	Input
53	Signal processing
54	Output
55	Alarm
56	Current
57	Display
58	Units
59	Special Unit
60	Service
61	Primary adjust
62	Primary data
63	Secondary adjust
64	Range parameters
65	Device Info
66	Language
67	Select german, english, french or spanish for the output on the display of the secondary.
68	German
69	English
70	French
71	Spanish
72	Meter size
73	actual meter size of the primary, selectable only if RANGE DN is set to FIXED.
74	1 mm 1/25 in
75	1.5 mm 1/17 in
76	2 mm 1/12 in
77	3 mm 1/8 in
78	4 mm 5/32 in
79	5 mm 3/16 in
80	6 mm 1/4 in
81	8 mm 5/16 in
82	10 mm 3/8 in
83	15 mm 1/2 in
84	20 mm 3/4 in
85	25 mm 1 in
86	32 mm 1-1/4 in
87	40 mm 1-1/2 in
88	50 mm 2 in
89	65 mm 2-1/2 in
90	80 mm 3 in
91	100 mm 4 in
92	125 mm 5 in
93	150 mm 6 in
94	200 mm 8 in
95	250 mm 10 in
96	300 mm 12 in
97	350 mm 14 in
98	400 mm 16 in
99	450 mm 18 in
100	500 mm 20 in
101	600 mm 24 in
102	700 mm 27 in
103	750 mm 30 in
104	800 mm 33 in
105	900 mm 36 in
106	1000 mm 39 in
107	1100 mm 42 in
108	1200 mm 48 in
109	1300 mm 51 in
110	1350 mm 53 in
111	1400 mm 54 in
112	1500 mm 60 in
113	1600 mm 64 in
114	1700 mm 66 in
115	1800 mm 72 in
116	2000 mm 78 in
117	2100 mm 82 in
118	2200 mm 86 in
119	2300 mm 90 in
120	2400 mm 94 in
121	Filter
122	Select Filter on, if the output signal is noisy or for pulsating flows (pulsation free output).
123	off
124	on
125	Prog unit
126	select with density if the programable unit is massflowand without density if it is volumeflow.
127	without density
128	with density
129	Function P1/P2
130	on operating mode 2 RANGE,AUTOMATIC terminal P1/P2 signals the flow range. On the other operating modes all other functions are available.
131	No Funktion
132	F/R-Signal
133	Empty pipe open
134	Empty pipe closed
135	General alarm open
136	General alarm closed
137	MAX/MIN alarm open
138	MAX/MIN alarm closed
139	MIN alarm open
140	MIN alarm closed
141	MAX alarm open
142	MAX alarm closed
143	Range
144	Function X1
145	on operating mode 2 RANGE,EXTERN terminal X1 selets the flow range. If the contact is open range 1 is selected, if it is closed range 2 is selected. On the other operating modes the other functions are available.
146	Totalizer reset
147	ext. range 2
148	Iout at Alarm
149	Select HIGH or LOW current output for error conditions.
150	130 %
151	0 %
152	select ON if the detector e.pipe shall signals an empty pipe.
153	Alarm empty pipe
154	If set to ON an empty pipe is signaled with the combined output signal. If set to off no contact output signal will be set.
155	Iout at empty pipe
156	Select HIGH or LOW current output on empty pipe.
157	Totalizer funct.
158	If STANDARD is selected the count pulses for forward and reverse flow directions are integrated separately in two different counters. On DIFFER.TOTAL only a single difference totalizer is utilized for both flow directions. On forward flow the totalizer is incremented, on reverse flow he is decremented.
159	standard
160	differ. total
161	1st line
162	The process display for the 1st line of the secondary.
163	Q [Bargraph]
164	Q [mA]
165	Q [unit]
166	Q [%]
167	Detector e.P.
168	Signal p/n
169	Reference p/n
170	Signal, Ref.
171	Blanks
172	TAG number
173	Mains Freqency
174	2nd line
175	The process display for the 2nd line of the secondary.
176	1st line multipl.
177	The multiplex mode for the 1st line of the secondary.
178	2nd line multipl.
179	The multiplex mode for the 2nd line of the secondary.
180	Operating mode
181	Select STANDARD for continuous flow. Select FAST for piston pump operation and short time fills >3 s. 2 RANGE, AUTOMATIC sets function P1 P2 to RANGE. MIN- and MAX-Alarm always refer to range 1. 2 RANGE, EXTERN sets function X1 to EXT.RANGE. MIN- and MAX-Alarm always refer to the selected range.
182	fast
183	2 Range, auto.
184	2 Range, ext.
185	Flowdirection
186	flowdirection is selected in forward and reverse flow or forward flow only.
187	forward
188	forward/reverse
189	Flowindication
190	Reverses the flow direction designations.
191	opposite
192	Module
193	Selects the hardware module placed in the secondary
194	none
195	Range velocity
196	Selects range velocity in m/s or ft/s.
197	10 m/s
198	33.33 ft/s
199	range<.05rangeDN
200	Ability to select upper range value less than .05 rangeDN.
201	range DN
202	Range DN set to FIXED allows the selection of METER SIZE from the implemented list. Range DN set to programable allows direct input to Range DN, metersize is not selectable.
203	fixed
204	programable
205	Debit excitation
206	debit excitation
207	6.25 Hz AC/DC
208	7.5 Hz AC/DC
209	12.5 Hz AC/DC
210	15 Hz AC/DC
211	25 Hz AC/DC
212	30 Hz AC/DC
213	6.25 Hz DC
214	7.5 Hz DC
215	12.5 Hz DC
216	15 Hz DC
217	25 Hz DC
218	30 Hz DC
219	negativ
220	positiv
221	excitation
222	6.25 Hz AC
223	7.5 Hz AC
224	12.5 Hz AC
225	15 Hz AC
226	25 Hz AC
227	30 Hz AC
228	Analog range
229	analog range
230	V=1 man.
231	V=2 man.
232	V=4 man.
233	V=8 man.
234	V=1 auto.
235	V=2 auto.
236	V=4 auto.
237	V=8 auto.
238	Preamplifier
239	preamplifier
240	yes
241	no
242	Collection char variables
243	char variables
244	MAX alarm from 0% to 130%.
245	3d
246	MIN alarm from 0% to 130%.
247	Overflow >F
248	overflow >F is incremented every 10,000,000 selected units.
249	5d
250	Overflow <R
251	overflow <R is incremented every 10,000,000 selected units.
252	Mains interrupt
253	mains interrupt
254	Code number
255	code number
256	Calibration mode
257	calibration mode
258	col ui_var
259	help ui variables
260
261	Range 2
262	Only valid if operating mode is set to 2 FLOW RANGE. Range 2 from 0.05*Range DN to upper range value.
263	Pulse factor
264	pulse factor from 0.001 to 1000 per selected unit. Max. count frequency is 5 kHz. Depends on the the selected pulse width and will be automaticly corrected.
265	.4f
266	9.4f
267	Pulse width
268	pulse width from 0.1 to 2000 ms. Depends on the the selected pulse factor and will be automaticly corrected.
269	ms
270	Low flow cutoff
271	Low flow cutoff from 0 to 10% of the selected flow upper range value.
272	8.4f
273	Density
274	Density in the range from 0.01 to 5 g/cm3 for mass flow.
275	System zero
276	system zero from -50 to 50 Hz
277	Unit factor
278	unit factor for the special unit based on liters.
279	.5f
280	8.5f
281	Threshold
282	threshold empty pipe
283	.1f
284	6.1f
285	Span adjust >F
286	span adjust >F
287	Span adjust <R
288	span adjust <R
289	Zero adjust
290	zero adjust
291	Adjust Iout 4mA
292	adjust Iout 4mA
293	Adjust Iout 20mA
294	adjust Iout 20mA
295	Calibration
296	calibration
297	.2f
298	8.2f
299	Span Cs 6.25 Hz
300	span Cs 6.25 Hz
301	Zero Cz 6.25 Hz
302	zero Cz 6.25 Hz
303	Span Cs 12.5 Hz
304	span Cs 12.5 Hz
305	Zero Cz 12.5 Hz
306	zero Cz 12.5 Hz
307	Span Cs 25 Hz
308	span Cs 25 Hz
309	Zero Cz 25 Hz
310	zero Cz 25 Hz
311	freq. emp.pipe
312	frequency measured by detector empty pipe
313	.f
314	Collection float variables
315	Help float variables
316	Reset Total. >F
317	Reset Total. <R
318	Reset Overflow >V
319	Reset Overflow <R
320	Name special unit
321	Name of the special unit (4 byte ASCII)
322	device busy
323	Auto adj. sys.zero
324	Load Primary Data
325	Error EEPROM or Error ext.EEPROM
326	Converter in XM1000-Mode
327	Store Primary Data
328	Error EEPROM
329	FMU860
330	DT
331	DVC
332	FCX
333	AS800
334	340T
335	340C
336	344
337	Siemens Micro K
338	SITRANS L
339	SIPAN PH
340	SITRANS P
341	75SMT
342	UNIDELTA
343	8320
344	SX5100
345	TSV175
346	DMU
347	3780
348	BM70
349	8u
350	6.2f
351	7d
352	4.2f
353	Pulse Output Unit- Engineering units that the frequency andtotalizer outputs will be displayed with.
354	Gross Total Value- Non-resettable totalizer value. Counts frequency output pulses while total control is turned on. This value will be reset to 0 when the pulse scaling, line size, or units are changed.
355	Reverse Total Value- Non-resettable totalizer value. Counts frequency output pulses while total control is turned on and flow is in the reverse direction. This value will be reset to 0 when the pulse scaling, line size, or units are changed.
356	Pulse output units- Engineering units that the frequency and totalizer outputs will be displayed with
357	Gross Total Value- Counts frequency output pulses while total control is turned on. This value will be reset to 0 when the pulse scaling, line size, or units are changed
358	Reverse Total Value- Counts frequency output pulses while total control is turned on and flow is in the reverse direction. This value will be reset to 0 when the pulse scaling, line size, or units are changed
359	Pulse output- scaled frequency output from 0-1000 Hz, linear with input.
360	Net Total Value- Resettable totalizer.
361	Really reset totalizer forward ?
362	Really reset totalizer reverse ?
363	Really reset overflow counter totalizer forward ?
364	Really reset overflow counter totalizer reverse ?
365	Really start automatic adjust system zero ?
366	automatic adjust system zero has been started * Please wait *
367	Error system zero
368	adjust system zero ok new value: %{0}
369	Really load primary data ?
370	Really store primary data ?
Reference ID	String