Device dictionary

Loading…

Reference ID	String
0	ABB
1	263/265, 2000T
2	Local write lock
3	Invalid float format
4	current out of range
5	Hardware failure of the electronic
6	Memory error
7	Failure in measurement
8	Configuration not valid
9	Comm Error Electr-EEPROM
10	Comm Error Sensor-EEPROM
11	max Write-Cycles Electr-EEPROM
12	max Write-Cycles Sensor-EEPROM
13	Electronic Data Error
14	Sensor Data Error
15	User Data Error
16	Factory Reset Data Error
17	Saving EEPROM Data
18	Device is busy
19	Wrong length of cycl data
20	Cycl object not readable
21	Cycl object not writable
22	ROM error
23	Error int RAM
24	Error ext RAM
25	Current reached lower limit
26	Current reached upper limit
27	Field Device Variable Unit- unit in which digital value, upper range value, lower range value are displayed. Pressure- Measured process pressure in relation to a reference pressure.
28	inH2O
29	inHg
30	ftH2O
31	mmH2O
32	mmHg
33	psi
34	bar
35	mbar
36	g/cm2
37	kg/cm2
38	Pa
39	kPa
40	torr
41	atm
42	MPa
43	special
44	Percent of Range- Variable which represents the digital value with respect to the range defined by the lower range value and upper range value. For normal operating modes. This variable is always in percent. Pressure- Measured process pressure in relation to a reference pressure.
45	.1f
46	Upper Sensor Limit Value- Defines the maximum value able to be used for the upper range value. Pressure- Measured proccess pressure in relation to a reference pressure.
47	Lower Sensor Limit Value- Defines the lowest allowable value for the lower range value. Pressure- Pressure of the process with respect to a reference pressure.
48	Minimum Span Value- Defines the smallest allowable difference between the Upper Range Value and the Lower Range Value. Pressure- Measured proccess pressure in relation to a reference pressure.
49	Linearization
50	Square root
51	Square root to the 3rd power
52	Square root to the 5th power
53	Linearization curve
54	Linearization primary element
55	Spherical tank
56	Cylindric lying tank
57	Upper Range Value- Defines the endpoint for the analog value and the 100% point of the percent range. The upper range value also defines the operational endpoint from which the alarms for the analog output value as well as the associated digital value are taken. Pressure- Measured proccess pressure in relation to a reference pressure.
58	.3g
59	.f
60	.2f
61	Lower Range Value- Defines the operational endpoint or the analog output signal and 0% of the percent range. In addition, the lower range value defines an operational endpoint from which the alarm values for the analog output as well as the associated digital value are derived. Pressure- Pressure of the process with respect to a reference pressure.
62	Damping Value- Damping time which affects both the digital and analog output values. The variable is always in seconds. Pressure- Pressure of the process with respect to a reference pressure.
63	4.1f
64	Flange Type- Part next to the sensor which physically connects the process to the sensor. Pressure- Pressure of the process measured with respect to a reference pressure.
65	Flange and 1/4 NPT
66	DIN 19213 and 1/4 NPT
67	DIN16288: B-G 1/2A
68	DIN16288: D-G 1/2A
69	NPT1/2 '' male thread
70	NPT1/2 '' fem. thread
71	NPT 1/4 internal thread
72	Pin DIN 16288 Form
73	Alcatel flange DN25
74	Pressure sensor with flange
75	O Ring Material- Material of the seal between the module and flange.
76	Stainless Steel 304
77	Stainless Steel 316
78	Titanium
79	Platinum-Iridium
80	Alloy 20
81	Cobalt Chromium Nickel
82	Ethyl-Prop
83	Urethane
84	Gold Monel Alloy
85	Tefzel
86	Ryton
87	PVC
88	Nitrile Rubber
89	Inconel
90	Kynar
91	Aluminium
92	Nickel
93	FEP
94	Stainless Steel 316 Ti
95	Hastelloy C276
96	Klinger C4401
97	Thermotork
98	Grafoil
99	PTFE coated 316l SST
100	Gold plated Hastelloy C276
101	PTFE Glass
102	PTFE Graphite
103	1.4571/1.4404
104	Hastelloy C/1.4571
105	1.4435/1.4571
106	Per Fluor Kautschuk
107	14435
108	AU/1.4404
109	Gold plated Monel
110	PVDF
111	EPDM
112	Steel
113	Stainless Steel, ferritic
114	Stainless Steel, austenitic
115	Copper based Alloys
116	Brass
117	PTFE Hastelloy
118	Stainless Steel CF 8M
119	Hastelloy SST
120	Gold plated SST
121	Monel 400
122	Not used
123	Unknown
124	Meter View - Defines which information is shown on the display.
125	Meter View
126	Pressure
127	Percent
128	Current
129	Mass flow/Normalized vol flow
130	Volume flow
131	Remote Seal Type- Type of remote seal connected to the device. This is only true when only 1 remote seal is installed.
132	Flush diaphragm DN 25
133	Fl. diaphr. ANSI 1''
134	Fl. diaphragm DN 50
135	Fl. diaphr. ANSI 2''
136	Fl. diaphragm DN 80
137	Fl. diaphr. ANSI 3''
138	Ext. diaphragm DN 50
139	Ext.diaphr. ANSI 2''
140	Ext. diaphragm DN 80
141	Ext.diaphr. ANSI 3''
142	Tube RS DN25/ANSI1''
143	Tube RS DN40/1.5''
144	Tube RS DN50/2''
145	Tube RS DN80/3''
146	RS w. cap screw DN50
147	RS clamp connect.2''
148	Miniature RS G 1 A
149	Miniature RS G 1/2 A
150	Sensor Fill Fluid- Fluid in the module.
151	Fluor carbon
152	Destilled water
153	High temperature oil
154	Vegetable Oil
155	Mineral oil
156	White oil
157	Fill fluid FDA certified
158	Fill fluid ABB
159	Number of Remote Seals- Number of remote seals on the device.
160	5u
161	Send Warning- Sends a unit code warning to the user.
162	Send Warning
163	Sensor Serial Number- Clearly defines the sensor from which the digital value or the field device variable is primarily taken. Pressure Sensor- Hardware that measures pressure with respect to a reference pressure.
164	Lower Sensor Trim Point- Applied process pressure at which the last low sensor trim was performed. Pressure Sensor- Measured proccess pressure in relation to a reference pressure.
165	Lower sensor trim point
166	Upper Sensor Trim Point- Applied process pressure at which the last upper sensor trim was performed. Pressure Sensor- Measured proccess pressure in relation to a reference pressure.
167	Upper sensor trim point
168	Analog Output Value- Value that corresponds with the digital variable under normal operating modes. Analog Output- Measureable physical output which can change user intervention.
169	PV AO
170	.3f
171	6.3f
172	Analog Output Alarm Type- Defines how the analog output responds when the field device detects that the analog output does not correspond with the field device variable. NOTE- The digital value can be undefined. Analog Output- Measureable physical output which can change without user intervention.
173	AO alarm typ
174	Hold last value
175	Measurement Type- Type of measurement this field device is intended to be used for.
176	MVD Kap. 15712
177	MVD Piezo 15712
178	MVDA Piezo 15713
179	Internal use
180	MVD Piezo 15712 100 bar
181	MVP Kap. 15753
182	MVPA Kap. 15754
183	MVP Piezo 15753
184	MVPA Piezo 15754
185	Levelprobe, CapSensor
186	Levelprobe, PiezoSensor
187	Flange Material- Material of flange type.
188	Remote Seal Isolator Material- Remote seal material of the parts which come in contact with the process medium. This is only true so long only 1 remote seal is installed.
189	Sensor Isolator Material- Material of a part of the sensor which comes in contact with the process material.
190	Drain Vent Material- Material of a removable plug in the flange which can be opened to remove unwanted process medium from the sensor area.
191	Loc keys ctrl mode
192	Local Keys Control Mode- Controls the mode of the User Interface keys on the Field Device.
193	Off
194	On
195	Setting not accepted
196	Pres range values
197	PV range values
198	Write variables
199	Sensors
200	Pressure Sensor
201	Full trim
202	Stat pres trim
203	Pres sens info
204	Sens temp sensor
205	Process value
206	Stat pres
207	Process value unit
208	Process value Unit- unit in which digital value, upper range value and lower range value are displayed.
209	CFM
210	GPM
211	L/min
212	ImpGal/min
213	m3/h
214	ft/s
215	m/s
216	gal/s
217	Mgal/d
218	L/s
219	ML/d
220	CFS
221	ft3/d
222	m3/s
223	m3/d
224	ImpGal/h
225	ImpGal/d
226	°C
227	°F
228	°R
229	K
230	mV
231	Ohm
232	Hz
233	mA
234	gallon
235	L
236	ImpGal
237	m3
238	ft
239	m
240	bbl
241	in
242	cm
243	mm
244	min
245	s
246	h
247	d
248	cSt
249	cP
250	uS
251	%
252	V
253	pH
254	g
255	kg
256	t
257	lb
258	STon
259	LTon
260	mS/cm
261	uS/mm
262	g/s
263	g/min
264	g/h
265	kg/s
266	kg/min
267	kg/h
268	kg/d
269	t/min
270	t/h
271	t/d
272	lb/s
273	lb/min
274	lb/h
275	lb/d
276	STon/min
277	STon/h
278	STon/d
279	LTon/h
280	LTon/d
281	decatherm
282	SGU
283	g/cm3
284	kg/m3
285	lb/gal
286	lb/ft3
287	g/ml
288	kg/L
289	g/L
290	lb/in3
291	STon/yd3
292	degTwad
293	degBrix
294	degBaum hv
295	degBaum lt
296	degAPI
297	% sol/wt
298	% sol/vol
299	degBall
300	proof/vol
301	proof/mass
302	bushel
303	yd3
304	ft3
305	in3
306	m/h
307	Nm3/h
308	NL/h
309	SCFM
310	bbl (liq)
311	oz
312	ft-lb
313	KW
314	KWH
315	hp
316	CFH
317	m3/min
318	bbl/s
319	bbl/min
320	bbl/h
321	bbl/d
322	gal/h
323	ImpGal/s
324	L/h
325	ppm
326	Mcal/h
327	MJ/h
328	Btu/h
329	% stm qual
330	ft3/lb
331	pF
332	% plato
333	Mcal
334	kOhm
335	MJ
336	Btu
337	Nm3
338	NL
339	Sft3
340	gal/d
341	hl
342	inH2O (4°C)
343	mmH2O (4°C)
344	W
345	MW
346	Mft3/d
347	WH
348	MWH
349	J
350	kJ
351	kJ/kg
352	Process value unit
353	ft3/min
354	Gal/min
355	ft3/s
356	ft3/h
357	Process Value
358	Process value- depending on the device either pressure, different.pressure or mass/volume flow.
359	Field Device Variable Unit- Engineering unit to be displayed with the Calibration Points. Pressure- Pressure of the process measured with respect to a reference pressure.
360	Pressure Calibration Unit
361	Pressure- Variable that tracks the Digital Value representation with respect to the range defined by the Lower Range Value and Upper Range Value, for normal operating modes. All pressure units are possible.
362	Field Device Variable Value- Digital value that changes with respect to process or ambient temperature over time with no user intervention. Sensor Temperature- Temperature of the sensor wich measures the process.
363	Snsr temp unit
364	Field Device Variable Unit- Digital unit that the variable is displayed in. Sensor Temperature- Temperature of the sensor which measures the proccess.
365	°K
366	Field Device Variable Value- Digital value that can change without user intervention. Pressure- Measured proccess pressure in relation to a reference pressure.
367	Sensor temp
368	Sensor Temperature- Temperature of the sensor which measures the proccess.
369	Process temp.
370	Stat pres unit
371	Field Device Variable Unit- unit in which digital value is displayed. Static pressure- Static pressure of the sensor which measures the proccess.
372	Stat. Pressure Lower Sensor Trim Point- Applied process pressure at which the last low sensor trim was performed. Stat. Pressure Sensor- Pressure hardware that measures pressure with respect to a reference pressure.
373	Stat Pr sns LST pt
374	Stat. Pressure Upper Sensor Trim Point- Applied process pressure at which the last upper sensor trim was performed. Stat. Pressure Sensor- Pressure hardware that measures pressure with respect to a reference pressure.
375	Stat Pr sns UST pt
376	Stat pres USL
377	Upper Sensor Limit Value- Defines the maximum value able to be used for the static pressure upper range value. Static pressure- Static pressure of the sensor which measures the proccess.
378	Stat pres LSL
379	Lower Sensor Limit Value- Defines the lowest allowable value for the static pressure lower range value. Static pressure- Static pressure of the sensor which measures the proccess.
380	Stat pres
381	Field Device Variable Value- Digital value that changes magnitude with respect to time with no user intervention. Static pressure- Static pressure of the sensor which measures the proccess.
382	Field Device Variable Unit- Digital unit that the variable is displayed in. Static pressure- Static pressure of the sensor which measures the proccess.
383	Field Device Variable Value- Digital value that changes with respect to static pressure over time with no user intervention. Static pressure- Static pressure of the sensor which measures the proccess.
384	Process temp. unit
385	Process temp unit- Digital unit that the process temperature is displayed in. Process Temperature- Temperature of the sensor which measures the proccess.
386	Proc Temp
387	Proccess Temperature- Temperature of the sensor which measures the proccess.
388	Field Device Variable Unit- Digital unit that the process temperature is displayed in. Proccess Temperature- Temperature of the sensor which measures the proccess.
389	Field Device Variable Value- Digital value that changes with respect to process temperature over time with no user intervention. Proccess Temperature- Temperature of the sensor wich measures the process.
390	Primary Variable- Primary variable of the process. Secondary Variable- Secondary variable of the process. Tertiary Variable- Tertiary variable of the process.
391	Remote Seal Fill Fluid- Type of fluid in the device's remote seal.
392	Module Range Code- code for the measurement range of the transmitter's measurement cell.
393	10 mbar
394	25 mbar
395	60 mbar
396	160 mbar
397	400 mbar
398	1 bar
399	2.5bar
400	6 bar
401	16 bar
402	40 bar
403	100 bar
404	250 bar
405	600 bar
406	20 bar
407	30 bar
408	410 bar
409	12.5 mbar
410	Rated Pressure
411	Rated Pressure- Highest operating pressure which may be applied simultaneously to both measuring chambers.
412	2.5 bar
413	25 bar
414	400 bar
415	63 bar
416	64 bar
417	160 bar
418	10 bar
419	150 psi
420	300 psi
421	600 psi
422	1500 psi
423	.2e
424	Soft Write Lock
425	Soft Write Lock- possibility to write lock the device without a key.
426	on
427	off
428	LinSqrPoint
429	LinSqrtPoint- Transition point from linear to square root calculation and vice versa.Adjustment range : 5...20%
430	%
431	Lo flw cut
432	Low Flow Cutoff- Set point that determines when the process variable will indicate 0 rather than some nominally small value.Adjustment range : 0...15%
433	Proc. LRV
434	Process value, lower range value
435	set_flow_lrv_zero
436	OFF
437	ON
438	Proc. URV
439	Process value, upper range value
440	Proc. URV
441	Model
442	Pressure Sensor Lower Trim- Calibrate the pressure sensor.
443	Pressure Sensor Upper Trim- Calibrate the pressure sensor.
444	Pressure Sensor Lower Trim- Calibrate the static pressure sensor.
445	Stat pres low snsr trim
446	Pressure Sensor Upper Trim- Calibrate the static pressure sensor.
447	Stat pres upp snsr trim
448	Exit Trim Mode- Notifies the User that the trim is finished.
449	Performs self test on the 2000T. Reports any errors.
450	Stuck in self test
451	Self test OK
452	Master reset
453	Resets the 2000T electronic
454	Master reset OK
455	temp unit action
456	old unit
457	Str. old unit
458	Pres. units
459	Stat pres unit
460	Factory reset
461	ATTENTION! This will reset all user configured data to factory default values!
462	FMU860
463	DT
464	DVC
465	FCX
466	AS800
467	340T
468	340C
469	344
470	Siemens Micro K
471	SITRANS L
472	SIPAN PH
473	SITRANS P
474	75SMT
475	UNIDELTA
476	8320
477	SX5100
478	TSV175
479	DMU
480	3780
481	BM70
482	8u
483	Field Device Variable Unit- Engineering unit to be displayed with the Digital Value representation, Minimum Span, Upper Range Value, Lower Range Value, Lower Sensor Limit, and Upper Sensor Limit. Pressure- Pressure of the process measured with respect to a reference pressure.
484	Field Device Variable Value- Digital value that changes magnitude with respect to time with no user intervention. Pressure- Pressure of the process measured with respect to a reference pressure.
485	Percent of Range- Variable that tracks the Digital Value representation with respect to the range defined by the Lower Range Value and Upper Range Value, for normal operating modes. The units of this variable are always in percent. Pressure- Pressure of the process measured with respect to a reference pressure.
486	3.2f
487	Sensor Limit Units and Minimum Span Units- Engineering unit to be displayed with the Upper Sensor Limit, Lower Sensor Limit, and Minimum Span. Pressure- Pressure of the process measured with respect to a reference pressure.
488	Upper Sensor Limit Value- Defines the maximum useable value for the Upper Range Value. Pressure- Pressure of the process measured with respect to a reference pressure.
489	Lower Sensor Limit Value- Defines the minimum useable value for the Lower Range Value. Pressure- Pressure of the process measured with respect to a reference pressure.
490	Minimum Span Value- Defines the smallest allowable difference between the Upper Range Value and the Lower Range Value. Pressure- Pressure of the process measured with respect to a reference pressure.
491	Pres xfer fnctn
492	Transfer Function- Defines the transformation function that will be applied from the Field Device Variable to the Analog Output, and Percent Range. The Transfer Function does not affect the Digital Value representation. Pressure- Pressure of the process measured with respect to a reference pressure.
493	Range Unit- Engineering unit to be displayed with the Upper Range Value and Lower Range Value. Pressure- Pressure of the process measured with respect to a reference pressure.
494	Upper Range Value- Defines the operational endpoint from which the Analog Value, and the 100% point of the Percent Range are derived. In addition, the Upper Range Value defines an operational endpoint which the alarms associated with the Analog Value, and the alarms associated with the Digital Value representation are derived. Pressure- Pressure of the process measured with respect to a reference pressure.
495	Lower Range Value- Defines the operational endpoint from which the Analog Value, and the 0% point of the Percent Range are derived. In addition, the Lower Range Value defines an operational endpoint which the alarms associated with the Analog Value, and the alarms associated with the Digital Value representation are derived. Pressure- Pressure of the process measured with respect to a reference pressure.
496	Damping Value- Damping time constant applied to both the Digital Value representation and Analog Value of the respective Analog Output. The units of this variable are always in seconds. Pressure- Pressure of the process measured with respect to a reference pressure.
497	s
498	4.2f
499	Flange Type- Hardware, adjacent to the sensor, that physically connects the process to the sensor. Pressure- Pressure of the process measured with respect to a reference pressure.
500	O Ring Material- Construction material of a seal that exists between the module and flange.
501	Meter Installation- Defines whether there is a meter installed or not and possibly what information the meter will display.
502	Remote Seal Type- Type of device that is capable of detecting and passing on the process pressure on to the module. This is only unambiguous if 1 remote seal is installed.
503	Sensor Fill Fluid- Fluid material in the module.
504	Number of Remote Seals- Physical quantity of the seals for the remote seal that is installed.
505	Send warning
506	Send Warning- Yields a units code notice to the User.
507	Variables which use this as the units code will be in the previous units until this value is sent to the device.
508	Analog Output Value- Value that tracks the Digital Value representation, under normal operating modes. Analog Output- Measureable physical output which changes with respect to time, without user intervention.
509	5.3f
510	Analog Output Alarm Type- Defines how the Analog Output will respond when the Field Device detects that the Analog Output may not be tracking the associated Field Device Variable. NOTE- The Digital Value representation may not be determinate. Analog Output- Measureable physical output which changes with respect to time, without user intervention.
511	Sensor Serial Number- Uniquely identifies the sensor from which the Digital Value representation or Field Device variable is primarily derived. Pressure Sensor- Pressure hardware that measures pressure with respect to a reference pressure.
512	Measurement Type- Type of measurement application this Field Device is intended to be used with.
513	Lower Sensor Trim Point- Applied process pressure at which the last low sensor trim was performed. Pressure Sensor- Pressure hardware that measures pressure with respect to a reference pressure.
514	6.4f
515	.4f
516	Upper Sensor Trim Point- Applied process pressure at which the last upper sensor trim was performed. Pressure Sensor- Pressure hardware that measures pressure with respect to a reference pressure.
517	Flange Material- Construction material of flange type.
518	Remote Seal Isolator Material- Construction material of a part of the remote seal type that comes in contact with the process material. This is only unambiguous if 1 remote seal is installed.
519	Sensor Isolator Material- Construction material of a part of the module type that comes in contact with the process material.
520	Local Keys Control Mode- Controls the mode of the User Interface keys on the Field Device.
521	Drain Vent Material- Construction material of a removable plug that exists on the flange type that can be opened temporarily to remove unwanted process from the sensor area.
522	Apply low pressure
523	Press OK when pressure is stable
524	Enter applied pressure value
525	trim_point
526	Trim was done
527	Apply hi pressure
528	No function at gauge/absolut pressure devices
529	Trim was not done
530	Configuration not valid
531	Saving EEPROM Data Error
532	Device is busy
533	Wrong length of EEPROM cycl data
534	EEPROM cycl object not readable
535	EEPROM cycl object not writable
536	Device maybe stuck in selftest.
537	Please wait ...
538	Master reset OK
539	Variables with this unit maintain their old value until a new unit has been sent to the device.
540	ATTENTION! This will reset all user configured data to factory default values!
541	Reset failed
542	No function at multivar. devices
Reference ID	String