Loading…
Loading…
名称 | ID | 标签 | 描述 | 类型 | 访问 | 分类 |
---|---|---|---|---|---|---|
tmr_mass_flow_digital_units | 517F | TMR Mass Flow Unit | Field Device Variable Unit- Engineering unit to be displayed with the Digital Value representation, Minimum Span, Upper Range Value, Lower Range Value, Lower Sensor Limit, and Upper Sensor Limit. | 读/写 | 枚举 | 32 |
tmr_mass_flow_digital_value | 5153 | 流量 | 过程流体的质量流量,已矫正。 | 读 | 浮点 | 10 |
tmr_mass_flow_digital_cutoff | 536B | Mass Flow Rate (Remediated) Cutoff | The mass flow rate below which the frequency/pulse output indicates zero flow, and below which totalizers stop counting. Cutoffs can also be configured for the mA output(s) (the AO cutoffs). An AO cutoff is active only if the process variable assigned to the output is mass flow or volume flow. | 读/写 | 浮点 | 8 |
tmr_mass_flow_digital_damping | 536C | Flow Damping | 阻尼值——同时应用至各自模拟量输出的数值表示和模拟值的阻尼时间常数。该变量的单位始终为秒钟。 | 读/写 | 浮点 | 32 |
tmr_mass_flow_upper_sensor_limit | 5155 | Remediated Mass Flow Upper Sensor Limit | 传感器上限值——定义上限值的最大可用数值。 | 读 | 浮点 | 8 |
tmr_mass_flow_lower_sensor_limit | 5154 | TMR Remediated Mass Flow Lower Sensor Limit | 传感器下限值——定义上限值的最小可用数值。 | 读 | 浮点 | 8 |
tmr_mass_flow_minimum_span | 5231 | TMR Remediated Mass Flow Minimum Span | 最小范围值——定义上限值和下限值之间允许的最小差。 | 读 | 浮点 | 8 |
tmr_mass_flow_hzfreq | 536D | Frequency Factor | The number of cycles, in Hertz, that equal a proportional flow rate represented by the frequency/pulse output. | 读/写 | 浮点 | 512 |
tmr_mass_flow_hzrate | 536E | Rate Factor | The flow rate that equals a set frequency if the frequency output represents mass or volume flow; or the mass or volume total that equals a set number of pulses if the frequency output represents mass or volume total. | 读/写 | 浮点 | 512 |
tmr_mass_flow_p_u | 536F | Pulses/Unit | This parameter allows you to scale the frequency output in terms of the number of pulses per unit of flow. | 读/写 | 浮点 | 512 |
名称 | ID | 标签 | 描述 | 类型 | 访问 | 分类 |