Loading…
Name ID Label Description Type Access Class
poll_var_1 419C Опрошенная переменная 1 This represents the variable code which will be read via HART for the compensation. R/W Enum 128
poll_var_2 419E Опрошенная переменная 2 This represents the variable code which will be read via HART for the compensation. R/W Enum 128
poll_type_code 4192 Polling Type This parameter identifies which compensation algorithms will be enabled within the device based on the polling being done. R/W Enum 128
update_rate 4186 Update Rate This parameter is the update rate for process variables through the system. Set the update rate to NORMAL for most applications. Set the update rate to SPECIAL if you are using the device in proving applications or extremely short batch applications. Refer to the user's manual for more information before you change this parameter. R/W Enum 2048
update_rate_var 4187 100 Hz Variable This parameter identifies the transmitter variable that will be updated at 100 Hz. All others will be updated, but at a slower rate. R/W Enum 2048
flow_pres_factor 4188 Flow Pressure Factor Pressure compensation factor applied to flow rate (% change per PSI). R/W Float 8
dens_pres_factor 4189 Density Pressure Factor Pressure compensation factor applied to density (g/Cucm change per PSI). R/W Float 8
zero_pres_factor 418A Flow Calibration Pressure Pressure at which flow calibration was performed. R/W Float 8
enable_pres_comp 41D2 Компенсация давления This parameter allows you to enable/disable the pressure correction feature R/W Enum 8
static_pressure 41D3 Давление компенсации This parameter allows you to enter a static pressure when using the pressure correction feature R/W Float 8
Name ID Label Description Type Access Class