Loading…
Name ID Label Description Type Access Class
liner_matl 4063 Обкладка трубки Configuration information identifying any liner material used with the sensor. Informational purposes only - does not affect flowmeter operation. R/W Enum 2048
sensor_model 4064 Sensor Model Configuration information identifying the sensor model installed. Informational purposes only - does not affect flowmeter operation. R/W PackedAscii 2048
sensor_matl 4065 Увлажненный материал трубки Configuration information identifying the material of which the sensor is constructed. Informational purposes only - does not affect flowmeter operation. R/W Enum 2048
sp_mass 4066 Базовый блок A standard engineering unit that serves as the mass component in a special unit. R/W Enum 32
sp_mass_time 4067 Базовое время A standard unit of time (seconds, minutes, hours, or days) that serves as the time component in a special unit. R/W Enum 32
sp_mass_fact 4068 Коэффициент пересчета A programmable divider for the base mass unit in a special unit. R/W Float 32
sp_mass_rate_text 4069 Обозначение расхода A 1 to 8 character description of a special unit of flow. R/W ASCII 2048
sp_mass_total_text 406A Обозначение суммарного значения A 1 to 8 character description of a special unit of mass, which is based on the special unit of flow to represent total. R/W ASCII 2048
met_direct 406B Flow Direction This parameter enables the user to determine whether the outputs and totalizers will indicate forward, reverse, bi-directional or absolute value flow. R/W Enum 32
slughi 406C Two-Phase High Limit A programmable high limit on density, which enables the transmitter to indicate two-phase flow (extremes in fluid density caused by two-phase of gas or accumulation of solids in a liquid flow stream) if fluid density goes outside programmed two-phase flow limits. R/W Float 8
Name ID Label Description Type Access Class