Loading…
Name ID Label Description Type Access Class
ao_1_fault_level 408D 故障ﾚﾍﾞﾙ This parameter allows you to select the lower or upper mA output level that will indicate a fault condition. The range is 1.0 to 3.6 mA for downscale or 21.0 to 24.0 for upscale. R/W Float 64
fo_fault_level 4090 故障ﾚﾍﾞﾙ This parameter allows you to select the upper frequency output level that will indicate a fault condition. The maximum value is 15000 Hz. R/W Float 64
density_for_cal 4092 R/W Float 4096
point_code 4093 R/W Unsigned 4096
densityfd_for_cal 4094 R/W Float 4096
temp_for_cal 4095 Ref temperature User-entered temperature for the purpose of performing an on-line temperature calibration. R/W Float 4096
cutoff_code 4098 ｶｯﾄｵﾌ ﾀｲﾌﾟ R/W Index 4096
D1 4099 D1 The density, in g/cc, of the air or other low-density fluid used during a 2-point density calibration. R/W Float 8
D2 409A D2 The density, in g/cc, of the water or other high-density fluid used during a 2-point density calibration. R/W Float 8
D3 409B D3 The density, in g/cc, of the water or other high-density fluid that is used during a 4-point density calibration with Micro Motion T-series sensors. D3 can represent the D3 value for a Micro Motion T-series sensor. R/W Float 8
Name ID Label Description Type Access Class