Loading…
Name ID Label Description Type Access Class
mass_flow_digital_units 4005 Mass Flow Unit Field Device Variable Unit- Engineering unit to be displayed with the Digital Value representation, Minimum Span, Upper Range Value, Lower Range Value, Lower Sensor Limit, and Upper Sensor Limit. R/W Enum 32
mass_flow_digital_value 4007 Flow Rate R Float 10
mass_flow_digital_cutoff 4009 Mass Flow Cutoff The mass flow rate below which the frequency/pulse output indicates zero flow, and below which totalizers stop counting. Cutoffs can also be configured for the mA output(s) (the AO cutoffs). An AO cutoff is active only if the process variable assigned to the output is mass flow or volume flow. R/W Float 8
mass_flow_analog_value 400A Mass Flow mA Value R/W Float 66
mass_flow_analog_upper_limit 400B ｱﾅﾛｸﾞ Upper ﾘﾐｯﾄ ｱﾅﾛｸﾞ ｱｳﾄﾌﾟｯﾄ ｱｯﾊﾟｰ ｴﾝﾄﾞ ﾎﾟｲﾝﾄ値 - ﾉｰﾏﾙ ｵﾍﾟﾚｰﾃｨﾝｸﾞ ｺﾝﾃﾞｨｼｮﾝでのｱﾅﾛｸﾞ出力の上限値のことです。 R Float 64
mass_flow_analog_lower_limit 400C ｱﾅﾛｸﾞ Lower ﾘﾐｯﾄ ｱﾅﾛｸﾞ ｱｳﾄﾌﾟｯﾄ ﾛｳｱｰ ｴﾝﾄﾞ ﾎﾟｲﾝﾄ値 - ﾉｰﾏﾙ ｵﾍﾟﾚｰﾃｨﾝｸﾞ ｺﾝﾃﾞｨｼｮﾝでのｱﾅﾛｸﾞ出力の下限値のことです。 R Float 64
mass_flow_additional_analog_damping 400D Added Damping ｱﾅﾛｸﾞ出力追加ﾀﾞﾝﾋﾟﾝｸﾞ - ﾀﾞﾝﾋﾟﾝｸﾞ ﾀｲﾑはｱﾅﾛｸﾞ出力に作用します。単位は常に秒で表します。 R/W Float 32
mass_flow_percent_range 400E Mass Flow Percent Range % ﾚﾝｼﾞ - ﾉｰﾏﾙ ｵﾍﾟﾚｰﾃｨﾝｸﾞ ﾓｰﾄﾞでの Lower/Upper ﾚﾝｼﾞ値によるﾃﾞｼﾞﾀﾙ値表示です。単位は常にﾊﾟｰｾﾝﾄです。 R Float 34
alarm_select 400F AO ｱﾗｰﾑ ﾀｲﾌﾟ Determines whether the Event is activated when it goes above (High) or below (Low) the setpoint. R Enum 10
mmi_transfer_function 4010 伝送ﾀｲﾌﾟ R/W Enum 32
Name ID Label Description Type Access Class