Loading…
Name ID Label Description Type Access Class
static_pressure 41BD Kompensationsdruck Dieser Parameter erm?glicht die Eingabe des konstanten Drucks, wenn die Funktion Druckkorrektur benutzt wird. R/W Float 8
enable_extern_temp 41CE Externe Temperatur Dieser Parameter erm?glicht das Aktivieren/Deaktivieren der Funktion Externe Temperatur. R/W Enum 8
static_temperature 41CF Korrekturtemperatur Dieser Parameter erm?glicht die Eingabe einer konstanten Temperatur, wenn die Funktion Externe Temperatur benutzt wird. R/W Float 8
flow_switch_setpoint 4100 Setpoint Dieser Parameter kann zum Triggern eines Bin?rausgangs benutzt werden, wenn der Masse-Durchfluss den konfigurierten Grenzwert ?berschritten hat. Dieser Grenzwert hat eine fixe Hysterese. R/W Float 16
do1_assignment 41D0 Assignment Dieser Parameter identifiziert welche Konditionen der Bin?rausgang besitzt. R/W Enum 1024
do1_state 41D1 Status Bin?rausgang Dieser Parameter kennzeichnet den Bin?rstatus. R/W Enum 2
do_index 41D2 Bin?r-Index R/W Index 4096
flow_switch_hysteresis 4501 Hysteresis (0.1-10.0) If the hysteresis is set to 5%, no change of the Discrete Output state occurs when the flow rate is within +-5% of the setpoint. If the setpoint is 100 lb/min and the first reading is below 95 lb/min, the flow switch turns On and will stay On until the flow rate rises above 105 lb/min. At this point it turns Off, and will stay off until the flow rate drops below 95 lb/min. R/W Float 8
chan_a 4504 Zuweisung This parameter identifies the physical output channel to be configured. Channel A is terminals 1 and 2, Channel B is terminals 3 and 4, and Channel C is terminals 5 and 6. R Enum 64
chan_b 44FC Zuweisung This parameter identifies the physical output channel to be configured. Channel A is terminals 1 and 2, Channel B is terminals 3 and 4, and Channel C is terminals 5 and 6. R/W Enum 64
Name ID Label Description Type Access Class