Loading…
Loading…
Name | ID | Label | Description | Type | Access | Class |
---|---|---|---|---|---|---|
sensor_matl | 4094 | Snsr matl | Configuration information identifying the material of which the sensor is constructed. Informational purposes only - does not affect flowmeter operation. | R/W | Enum | 2048 |
sp_mass | 4095 | Base mass unit | A standard engineering unit that serves as the mass component in a special unit. | R/W | Enum | 32 |
sp_mass_time | 4096 | Base mass time | A standard unit of time (seconds, minutes, hours, or days) that serves as the time component in a special unit. | R/W | Enum | 32 |
sp_mass_fact | 4097 | Mass flo conv factr | A programmable multiplier for the base mass unit in a special unit. | R/W | Float | 32 |
sp_mass_rate_text | 4098 | Mass flo text | A 1 to 4 character description of a special unit of flow. | R/W | ASCII | 2048 |
sp_mass_total_text | 4099 | Mass totl text | A 1 to 4 character description of a special unit of mass, which is based on the special unit of flow to represent total. | R/W | ASCII | 2048 |
met_direct | 409A | Flo direction | A control that enables the user to determine whether the frequency/pulse output and totalizers will indicate forward, reverse, or bi-directional flow. | R/W | Enum | 32 |
slughi | 409B | Slug high limit | A programmable high limit on density, which enables the transmitter to indicate slug flow (extremes in fluid density caused by slugs of gas or accumulation of solids in a liquid flow stream) if fluid density goes outside programmed slug flow limits. | R/W | Float | 8 |
sluglo | 409C | Slug low limit | A programmable low limit on density, which enables the transmitter to indicate slug flow (extremes in fluid density caused by slugs of gas or accumulation of solids in a liquid flow stream) if fluid density goes outside programmed slug flow limits. | R/W | Float | 8 |
flocal | 409D | FlowCal | A 10-character factor that describes the sensitivity of the sensor to mass flow. The first 6 characters are the flow rate, in grams/second, per microsecond of time shift between velocity signals from the sensor. The 2nd four characters are the flow temperature coefficient. | R/W | ASCII | 32 |
Name | ID | Label | Description | Type | Access | Class |