Loading…
Name ID Label Description Type Access Class
mmi_connection_var 4007 Enter mA Measurement Point The range of the mA output on the Model 2200S is 12-20 mA. If an adapter-barrier is installed, the range is converted to 4-20 mA. Specify the mA measurement point so that the mA output data can be reported correctly. If you specify Don't Know, data will be reported for both spans. R/W Enum 4096
serial_number 4009 Sensor Serial Number Sensor Serial Number- Uniquely identifies the sensor from which the Digital Value representation or Field Device variable is primarily derived. R/W Unsigned 2048
alarm_select 400A mA Output Alarm Type Determines whether the Event is activated when it goes above (High) or below (Low) the setpoint. R Enum 10
mmi_transfer_function 400B Transfer Function R/W Enum 32
analog_units 400C Anlog unit R/W Enum 32
mass_flow_digital_units 400D Mass Flow Unit Field Device Variable Unit- Engineering unit to be displayed with the Digital Value representation, Minimum Span, Upper Range Value, Lower Range Value, Lower Sensor Limit, and Upper Sensor Limit. R/W Enum 32
mass_flow_digital_value 400F Mass Flow Rate Current mass flow rate as calculated from external volume flow rate. R Float 10
mass_flow_digital_cutoff 4011 Mass Flow Cutoff The mass flow rate below which the frequency/pulse output indicates zero flow,and below which totalizers stop counting. Cutoffs can also be configured for the mA output(s) (the mA output cutoffs). An mA output cutoff is active only if the process variable assigned to the output is mass flow or volume flow. R/W Float 8
mass_flow_analog_value 4012 Mass Flow mA Value (Direct) R/W Float 66
mass_flow_analog_4_20_value 4013 Mass Flow mA Value (Adapter-Barrier) R/W Float 66
Name ID Label Description Type Access Class