Loading…
Name ID Label Description Type Access Class
SysFault 4009 System Fault State System Fault State defines how the Analog Output will respond when the transmitter detects a system fault. R/W Enum 65
LOEFault 401E LOE Fault State LOE Fault State defines how the Analog Output will respond when the transmitter detects a Loss of Echo fault. R/W Enum 65
SZFault 401F SZ Fault State Safety Zone Fault State defines how the Analog Output will respond when the transmitter detects a level that is within the Safety Zone which is a user defined area just below the Blocking Distance. Enable fault if necessary to ensure safe, reliable high-level readings in critical applications. If Latch3.6 or Latch22 is chosen, the unit will remain in alarm until it is manually cleared with the SZ Alarm Reset. R/W Enum 65
LOEDelay 4020 LOE Delay Loss of Echo Delay, valid values are 0 to 255 seconds. R/W Unsigned 2048
SZHeight 4021 SZ Height Safety Zone Height - Enter a distance that develops a safety zone just below the Blocking Distance. The transmitter will report a Safety Zone Fault if the level rises into this area. R/W Float 2048
AntennaType 4012 Antenna Antenna Type - Select the first 7 digits of the Antenna Model Number (first 4 are significant). Information is located on the nameplate mounted on the antenna. R/W Enum 2048
AntennaExtension 4013 Extension Antenna Extension - Select the last three digits of the Antenna Model Number corresponding to the Antenna Extension. Information is located on the nameplate mounted on the antenna. R/W Enum 2048
AntennaMount 4022 Antenna Mount Type of Antenna Mounting. R/W Enum 2048
Launcher 4023 Launcher Factory parameter, displayed for diagnostic purposes only. R/W Enum 2048
Dielectric 4024 Dielectric Select the dielectric range of the medium. R/W Enum 2048
Name ID Label Description Type Access Class