Loading…
Name ID Label Description Type Access Class
diaginfo_6 4056 Scatter Target Scattered Target - Return signals scattered due to turbulence in vessel. R Enum 2050
diaginfo_7 4057 Uncertn Target Uncertain Target - Target is missing, but not determined to be lost; device is holding last valid value while confirming the target position, will continue based upon the LOE Delay value, consult Factory if problem persists. R Enum 2050
diaginfo_8 4058 DC Noise DC Noise - Excessive noise on A/D channel; consult Factory. R Enum 2050
diaginfo_9 4059 Signal Too Hi Signal Too High - Level signal amplitude is excessive; choose higher Dielectric range, reduce Turbulence or Foam settings, consult Factory if problem persists. R Enum 2050
diaginfo_10 405A Signal Too Low Signal Too Low - Level signal amplitude is insufficient; choose lower Dielectric range, increase Turbulence or Foam settings, consult Factory if problem persists. R Enum 2050
diaginfo_11 405B Info 0800 R Enum 2050
diaginfo_12 405C IPC Bus IPC Bus - Internal communications error; consult Factory. R Enum 2050
diaginfo_13 405D IPC Checksum IPC Checksum - Internal communications error; consult Factory. R Enum 2050
diaginfo_14 405E IPC Length IPC Length - Internal communications error; consult Factory. R Enum 2050
diaginfo_15 405F IPC Ack IPC Ack - Internal communications error; consult Factory. R Enum 2050
Name ID Label Description Type Access Class