Loading…
Name ID Label Description Type Access Class
write_protect 00A7 書込禁止 書込禁止ﾓｰﾄﾞ - ﾌｨｰﾙﾄﾞ機器に書込を行った場合又はｱｸｼｮﾝ ｺﾏﾝﾄﾞを行った場合に, 可能か不可能を表示します。これはｺﾐｭﾆｹｰﾀ又は機器ﾊｰﾄﾞｳｪｱで簡単に設定することができます。 R Enum 2048
private_label_distributor 00A8 ﾃﾞｨｽﾄﾘﾋﾞｭｰﾀｰ ﾌﾟﾗｲﾍﾞｰﾄ ﾗﾍﾞﾙ ﾃﾞｨｽﾄﾘﾋﾞｭｰﾀｰ - ﾌｨｰﾙﾄﾞ機器に対する責任を明らかにするためのﾒｰｶｰ名をﾕｰｻﾞｰに知らせます。 R Enum 2048
final_assembly_number 00A9 製造番号 製造番号 - ﾌｨｰﾙﾄﾞ機器を確認や照合するときに使用するﾅﾝﾊﾞｰです。 R/W Unsigned 2048
xmtr_specific_status_0 0FB5 ｽﾃｰﾀｽ ｸﾞﾙｰﾌﾟ 1 ﾌｨｰﾙﾄﾞ機器ｽﾍﾟｼﾌｨｯｸ ｽﾃｰﾀｽ ﾊﾞｲﾄ 1 - 故障/警告/ﾌﾟﾛｾｽのｽﾃｰﾀｽに関連するﾌｨｰﾙﾄﾞ機器情報のﾃﾞｰﾀです。 R BitEnum 2051
xmtr_specific_status_1 0FB6 ｽﾃｰﾀｽ ｸﾞﾙｰﾌﾟ 2 ﾌｨｰﾙﾄﾞ機器ｽﾍﾟｼﾌｨｯｸ ｽﾃｰﾀｽ ﾊﾞｲﾄ 2 - 故障/警告/ﾌﾟﾛｾｽのｽﾃｰﾀｽに関連するﾌｨｰﾙﾄﾞ機器情報のﾃﾞｰﾀです。 R BitEnum 2051
burst_command_number 0FFD ﾊﾞｰｽﾄ ｵﾌﾟｼｮﾝ ﾊﾞｰｽﾄ ｵﾌﾟｼｮﾝ - ﾊﾞｰｽﾄ ﾓｰﾄﾞが On になっているときにﾊﾞｰｽﾄ出力のｵﾌﾟｼｮﾝを選択できます。 W Enum 128
burst_mode_select 0FFF ﾊﾞｰｽﾄ ﾓｰﾄﾞ ﾊﾞｰｽﾄ ﾓｰﾄﾞ選択 - ﾊﾞｰｽﾄ ﾓｰﾄﾞ機能の選択ﾓｰﾄﾞです。ﾊﾞｰｽﾄを選択した場合, ﾘﾝｸされたﾎｽﾄが要求しなくてもﾌｨｰﾙﾄﾞ機器は HART のﾒｯｾｰｼﾞを送信します。 W Enum 128
pressure_units 138D 単位 Field Device Variable Unit- Engineering unit to be displayed with the Digital Value representation, Minimum Span, Upper Range Value, Lower Range Value, Lower Sensor Limit, and Upper Sensor Limit. Pressure- Pressure of the process measured with respect to a reference pressure. R/W Enum 8
pressure_value 138E 圧力 Field Device Variable Value- Digital value that changes magnitude with respect to time with no user intervention. Pressure- Pressure of the process measured with respect to a reference pressure. R Float 10
pressure_percent_range 138F PV % Percent of Range- Variable that tracks the Digital Value representation with respect to the range defined by the Lower Range Value and Upper Range Value, for normal operating modes. The units of this variable are always in percent. Pressure- Pressure of the process measured with respect to a reference pressure. R Float 34
pressure_upper_range_limit 1393 USL Upper Sensor Limit Value- Defines the maximum useable value for the Upper Range Value. Pressure- Pressure of the process measured with respect to a reference pressure. R Float 8
pressure_lower_range_limit 1394 LSL Lower Sensor Limit Value- Defines the minimum useable value for the Lower Range Value. Pressure- Pressure of the process measured with respect to a reference pressure. R Float 8
pressure_minimum_span 1390 最小ｽﾊﾟﾝ Minimum Span Value- Defines the smallest allowable difference between the Upper Range Value and the Lower Range Value. Pressure- Pressure of the process measured with respect to a reference pressure. R Float 8
pressure_output_transfer_function 1391 Transfer function Transfer Function- Defines the transformation function that will be applied from the Field Device Variable to the Analog Output, and Percent Range. The Transfer Function does not affect the Digital Value representation. Pressure- Pressure of the process measured with respect to a reference pressure. R/W Enum 32
pressure_upper_range_value 1396 URV Upper Range Value- Defines the operational endpoint from which the Analog Value, and the 100% point of the Percent Range are derived. In addition, the Upper Range Value defines an operational endpoint which the alarms associated with the Analog Value, and the alarms associated with the Digital Value representation are derived. Pressure- Pressure of the process measured with respect to a reference pressure. R/W Float 32
pressure_lower_range_value 1397 LRV Lower Range Value- Defines the operational endpoint from which the Analog Value, and the 0% point of the Percent Range are derived. In addition, the Lower Range Value defines an operational endpoint which the alarms associated with the Analog Value, and the alarms associated with the Digital Value representation are derived. Pressure- Pressure of the process measured with respect to a reference pressure. R/W Float 32
pressure_damping_value 1398 圧力ﾀﾞﾝﾋﾟﾝｸﾞ Damping Value- Damping time constant applied to both the Digital Value representation and Analog Value of the respective Analog Output. The units of this variable are always in seconds. Pressure- Pressure of the process measured with respect to a reference pressure. R/W Float 8
flange_type 139A ﾌﾗﾝｼﾞ ﾀｲﾌﾟ Flange Type- Hardware, adjacent to the sensor, that physically connects the process to the sensor. Pressure- Pressure of the process measured with respect to a reference pressure. R/W Enum 2048
o_ring_material 139B O ﾘﾝｸﾞ材質 O Ring Material- Construction material of a seal that exists between the module and flange. R/W Enum 2048
meter_installation 139C ﾒｰﾀｰ ﾀｲﾌﾟ Meter Installation- Defines whether there is a meter installed or not and possibly what information the meter will display. R/W Enum 256
remote_seal_type 139D ﾘﾓｰﾄ ﾀｲﾌﾟ Remote Seal Type- Type of device that is capable of detecting and passing on the process pressure on to the module. This is only unambiguous if 1 remote seal is installed. R/W Enum 2048
module_fill_fluid 139E 封入液 Sensor Fill Fluid- Fluid material in the module. R Enum 2048
number_of_remote_seals 139F ﾘﾓｰﾄ数量 Number of Remote Seals- Physical quantity of the seals for the remote seal that is installed. R/W Enum 2048
analog_output_value 1779 PV AO Analog Output Value- Value that tracks the Digital Value representation, under normal operating modes. Analog Output- Measureable physical output which changes with respect to time, without user intervention. R/W Float 66
analog_output_alarm_select 177A AO ALARM TYPE Analog Output Alarm Type- Defines how the Analog Output will respond when the Field Device detects that the Analog Output may not be tracking the associated Field Device Variable. NOTE- The Digital Value representation may not be determinate. Analog Output- Measureable physical output which changes with respect to time, without user intervention.There are 3 mode of AO Alarm Type as below; Overscale Underscale Hold last output R/W Enum 64
Name ID Label Description Type Access Class