Loading…
Name ID Label Description Type Access Class
remote_seal_type 139D Druckmittler Typ Remote Seal Type- Type of device that is capable of detecting and passing on the process pressure on to the module. This is only unambiguous if 1 remote seal is installed. R/W Enum 2048
module_fill_fluid 139E Füllflüssigkeit Sensor Fill Fluid- Fluid material in the module. R Enum 2048
number_of_remote_seals 139F Anzahl Druckmittler Number of Remote Seals- Physical quantity of the seals for the remote seal that is installed. R/W Enum 2048
analog_output_value 1779 PV AO Analog Output Value- Value that tracks the Digital Value representation, under normal operating modes. Analog Output- Measureable physical output which changes with respect to time, without user intervention. R/W Float 66
analog_output_alarm_select 177A AO ALARM TYPE Analog Output Alarm Type- Defines how the Analog Output will respond when the Field Device detects that the Analog Output may not be tracking the associated Field Device Variable. NOTE- The Digital Value representation may not be determinate. Analog Output- Measureable physical output which changes with respect to time, without user intervention.There are 3 mode of AO Alarm Type as below; Overscale Underscale Hold last output R/W Enum 64
pressure_sensor_serial_number 1770 Drucksensor Seriennr. Sensor Serial Number- Uniquely identifies the sensor from which the Digital Value representation or Field Device variable is primarily derived. Pressure Sensor- Pressure hardware that measures pressure with respect to a reference pressure. R Unsigned 2048
module_type_code 177B Art der Messung Measurement Type- Type of measurement application this Field Device is intended to be used with. R Enum 2048
sensor_a_lower_sensor_trim_point 1774 Unt. Sensorabgleichpunkt Lower Sensor Trim Point- Applied process pressure at which the last low sensor trim was performed. Pressure Sensor- Pressure hardware that measures pressure with respect to a reference pressure. R/W Float 8
sensor_a_upper_sensor_trim_point 1776 Ob. Sensorabgleichpunkt Upper Sensor Trim Point- Applied process pressure at which the last upper sensor trim was performed. Pressure Sensor- Pressure hardware that measures pressure with respect to a reference pressure. R/W Float 8
flange_material 177C Flanschwerkstoff Flange Material- Construction material of flange type. R/W Enum 2048
Name ID Label Description Type Access Class