Loading…
Name ID Label Description Type Access Class
Dev_UTCTimeZone_1 4091 Time zone Select the time zone. Every time the time zone is changed, a logbook entry is created. R/W Enum 2048
FLOW_CorrVolumeFlow_1 4092 Corrected volume flow Displays the currently calculated volume flow compensated for the reference density. Additional information: - The reference density can be calculated or fixed. - The applicable unit of measure is specified in the "System units" submenu. R Float 2
FLOW_CorrVolumeFlowOffset_1 4093 Corrected volume flow offset Enter the offset by which to shift the zero point for the corrected volume flow. Additional information: The applicable unit of measure is Nm3/s. R/W Float 2048
FLOW_CorrVolumeFlowScale_1 4094 Corrected volume flow factor Enter the multiplication factor to apply to the corrected volume flow value. R/W Float 2048
FLOW_Density_1 4095 Density Displays the density currently measured. Additional information: The applicable unit of measure is specified in the "System units" submenu. R Float 2
FLOW_DensityDampingTime_1 4096 Density damping Enter time constant for damping (PT1 element) of the measured value for density: - Value = 0: No damping - Value > 0: Damping increases Additional information: Damping is implemented by means of a proportional transmission behavior with first order delay (PT1 element). R/W Float 2048
FLOW_DensityForcing_1 4097 Density calculation R Enum 2048
FLOW_DensityOffset_1 44F4 Density offset Enter the offset by which to shift the zero point for density. Additional information: The applicable unit of measure is kg/m3. R/W Float 2048
FLOW_DensityScale_1 44F5 Density factor Enter the multiplication factor to apply to the density value. R/W Float 2048
FLOW_DensityStatus_1 4098 Density status R Unsigned 2
Name ID Label Description Type Access Class