Loading…
Name ID Label Description Type Access Class
travel_high 4033 Travel High Denotes the upper travel limit of the valve before the travel alert is set. R/W Unsigned 8
travel_low 4034 Travel Low Denotes the lower travel limit of the valve before the travel alert is set. R/W Unsigned 8
travel_db 4035 Travel DB Denotes the travel limit deadband of the valve. R/W Unsigned 8
cycle_count 4036 Cycle Count Denotes the cycle count of the valve. R/W Unsigned 10
cycle_limit 4037 Cycle Limit Denotes the cycle limit of the valve before the cycle alert is set. R/W Unsigned 8
cycle_db 4038 Cycle DB Denotes the cycle deadband of the valve. R/W Unsigned 8
acum_count 4039 Accum. Count Denotes the Accumulator count of the valve. R/W Unsigned 10
acum_limit 403A Accum. Limit Denotes the accumulator limit of the valve before the accumulator alert is set. R/W Unsigned 8
acum_db 403B Accum. DB Denotes the accumulator deadband of the valve. R/W Unsigned 8
dev_db 403C Deviation DB Denotes the deviation deadband of the valve. R/W Unsigned 8
trvl_upper_limit 403D Upper Trvl Limit Denotes the upper travel limit the valve can go. R/W Unsigned 8
trvl_lower_limit 403E Lower Trvl Limit Denotes the lower travel limit the valve can go. R/W Unsigned 8
unique_device_type_code 07ED R/W Enum 4096
rosemount_model_code 07F5 R/W Enum 4096
rosemount_analytical_model_code 07F6 R/W Enum 4096
kayray_model_code 07F7 R/W Enum 4096
micro_motion_model_code 07F8 R/W Enum 4096
units_code 07E9 R/W Enum 4096
transfer_function_code 07EA R/W Enum 4096
material_code 07EC R/W Enum 4096
alarm_selection_code 07EB R/W Enum 4096
write_protect_code 07EE R/W Enum 4096
company_identification_code 07EF R/W Enum 4096
burst_mode_control_code 07F0 R/W Enum 4096
physical_signaling_codes 07F1 R/W Enum 4096
flag_assignment 07F2 R/W Enum 4096
operating_mode_code 07F3 R/W Enum 4096
analog_output_numbers_code 07F4 R/W Enum 4096
response_code 0096 Command Specific Response Code- Data that is returned in the Field Device response, that indicates the relative success of the Command sent in the Host request. This information may relate to the Data of the Host request or to the command itself. R/W Enum 129
comm_status 0098 Communications Error Summary- The Field Device has detected the following error condition while attempting to receive the Host request. Therefore the Command was not accepted, and the Host request caused no change to occur in the Field Device. R/W BitEnum 131
device_status 0097 Field Device Status- Data indicating that the Field Device has detected condition(s) in the Field Device relating to: its hardware / the validity of a variable / its operating status / an internal process R/W BitEnum 131
manufacturer_id 0099 Produttore Codice identificazione produttore - Si riferisce ad un produttore specifico, solitamente il nome di una società, che è responsabile della produzione del dispositivo di campo. R Enum 128
device_type 009A Model Model- References the type of Field Device, usually an advertised model number, that is unique to a single manufacturer R Enum 128
request_preambles 009B Num req preams Number of Request Preambles- Number of Preambles required from the Host request by the Field Device R Unsigned 128
universal_revision 009C Universal rev Universal Revision- Revision of the Universal Device Description, that the Field Device conforms to R Unsigned 128
transmitter_revision 009D Fld dev rev Field Device Revision- Revision of the Field Device Specific Device Description, that the Field Device conforms to R Unsigned 128
software_revision 009E Software rev Field Device Software Revision- This revision corresponds to the software or firmware, that is embedded in the Field Device R Unsigned 2048
hardware_revision 009F Hardware rev Versione hardware - Versione che corrisponde all’hardware dell’elettronica del dispositivo di campo. R Unsigned 2048
physical_signaling_code 00AB Physicl signl code Physical Signaling Code- The Physical Signaling Code describes the type of Physical Layer that has been implemented in the hardware that is responsible for the HART Communication port R Enum 2048
device_flags 00A0 Dev flags Field Device Flags- Describes special features of the Field Device that affect the Data Link Layer R BitEnum 128
device_id 00A1 Dev id Field Device Identification- Uniquely identifies the Field Device when combined with the Manufacturer Identification and Device Type. Therefore, this variable cannot be modified by the Host user. R Unsigned 128
polling_address 00A2 Poll addr Polling Address- Address used by the Host to identify a Field Device, and changeable by the User to control: the Multidrop Mode for Analog Output 1), and the Analog Output Fixed Mode of Analog Output 1) W Unsigned 128
tag 00A3 Tag Tag - Testo associato all’installazione del dispositivo di campo. Questo testo può essere utilizzato dall’utente in qualsiasi modo. Un uso consigliato è come etichetta univoca per un impianto che si correla all’etichetta di un dispositivo di campo: un disegno dell’impianto o su un sistema di controllo. Questa variabile viene utilizzata anche come tipo di handle di indirizzo a livello di collegamento dati. R/W PackedAscii 2048
message 00A4 Messaggio Messaggio - Testo associato al dispositivo di campo. Questo testo può essere utilizzato dall’utente in qualsiasi modo. Non esiste un uso raccomandato. R/W PackedAscii 2048
descriptor 00A5 Descrittore Descriptor- Text that is associated with the Field Device. This text can be used by the user in any way. There is no specific recommended use. R/W PackedAscii 2048
date 00A6 Data Data - Data del calendario gregoriano che viene memorizzata nel dispositivo di campo. Questa data può essere utilizzata dall’utente in qualsiasi modo. Non esiste un uso specifico raccomandato. R/W HartDate 2048
write_protect 00A7 Write protect Write Protect Mode- Indicates whether variables can be written to the Field Device, or whether commands that cause actions, to be performed in the Field Device, can or cannot occur. Depending on the Field Device, this is a mode that is controllable by the user, either via the Field Device hardware or the HART Protocol. R Enum 2048
private_label_distributor 00A8 Distributore Private Label Distributor- References the company that is responsible for the distribution of this Field Device to customers R Enum 2048
final_assembly_number 00A9 Final asmbly num Numero di gruppo finale - Numero che viene utilizzato a scopo di identificazione ed è associato al dispositivo di campo complessivo. R/W Unsigned 2048
xmtr_specific_status_0 0FB5 Status group 1 Byte di stato specifico dispositivo di campo 1 - Dati contenti le informazioni sullo stato del dispositivo di campo relative a: guasti/avvertimenti/stato del processo. R BitEnum 2051
Name ID Label Description Type Access Class