Loading…
Loading…
名称 | ID | 标签 | 描述 | 类型 | 访问 | 分类 |
---|---|---|---|---|---|---|
upperRange_value | 00EA | 主变量实际量程上限 | 上限值——定义模拟值和范围100%点开始的操作端点。此外,上限值还定义与模拟量值关联的报警和与数值表示关联的报警开始的操作端点。 | 读/写 | 浮点 | 32 |
lowerRange_value | 00EB | 主变量实际量程下限 | 下限值——定义模拟值和范围0%点开始的操作端点。此外,下限值还定义与模拟量值关联的报警和与数值表示关联的报警开始的操作端点。 | 读/写 | 浮点 | 32 |
pv_Value | 4036 | PV | 读 | 浮点 | 10 | |
pv_Units | 4037 | 主变量传感器单位 | 现场设备变量单位——使用数值表示、最小范围、范围上限、范围下限、传感器上限和传感器下限显示的工程单位。 | 读/写 | 枚举 | 8 |
pv_USL | 400B | USL | 传感器上限值——定义上限值的最大可用数值。 | 读 | 浮点 | 8 |
pv_LSL | 400A | LSL | 传感器上限值——定义上限值的最大可用数值。 | 读 | 浮点 | 8 |
pv_Min_Span | 400C | Minimum Span | 最小范围值——定义上限值和下限值之间允许的最小差。 | 读 | 浮点 | 8 |
pv_Damp | 4038 | Damping | 阻尼值——同时应用至各自模拟量输出的数值表示和模拟值的阻尼时间常数。该变量的单位始终为秒钟。 | 读/写 | 浮点 | 8 |
pv_SSN | 4007 | 传感器序列号 | 传感器序列号——识别数值表示或现场设备变量来源的传感器。 | 读/写 | 无符号 | 2048 |
analog_value | 400D | 模拟量输出 | 模拟量输出值——在正常工作模式下跟踪数值表示的数值。 | 读/写 | 浮点 | 66 |
fail_mode | 400E | 模拟量输出报警类型 | 模拟量输出报警类型——定义当现场设备检测到模拟量输出可能未跟踪关联现场设备变量时模拟量输出响应的方式。注意——数值表示可能不确定。 | 读 | 枚举 | 64 |
transfer_function | 1F84 | 转换功能 | 传送功能——定义由现场设备变量应用至模拟量输出和百分比范围的传送功能。传送功能不影响数值表示。 | 读 | 枚举 | 32 |
percent_range | 4039 | 主变量 % 范围 | % 范围——跟踪有关下限值和上限值所定义范围的数值表示的变量,该变量的单位始终为百分数。 | 读 | 浮点 | 34 |
sv_Value | 403A | Temp (SV) | Secondary variable temperature | 读 | 浮点 | 10 |
sv_Units | 403B | Temp (SV) unit | Secondary variable temperature engineering units | 读/写 | 枚举 | 8 |
tv_Value | 403C | Cond/Conc (TV) | Device Tertiary Variable (TV). TV = Concentration value when PV type = Conductivity. TV = Conductivity value when PV type = Concentration. | 读 | 浮点 | 10 |
tv_Units | 403D | Cond/Conc (TV) unit | Tertiary variable conductivity or concentration engineering units | 读/写 | 枚举 | 8 |
qv_Value | 403E | Uncomp Cond (QV) | Quaternary variable temp-uncompensated conductivity | 读 | 浮点 | 10 |
qv_Units | 403F | Uncomp Cond (QV) unit | Quaternary variable uncompensated conductivity engineering units | 读/写 | 枚举 | 8 |
var_TB82_primary_value_type | 400F | PV type | Primary Value (PV) type selection. When PV type = Conductivity, PV value = Conductivity and TV value = Concentration. When PV type = Concentration, PV value = Concentration and TV value = Conductivity. | 读/写 | 枚举 | 8 |
var_TB82_sensor_group | 4010 | Snsr group | Three sensor groups are applied and defined by the sensor cell constant: A, B and C. | 读/写 | 枚举 | 8 |
var_TB82_sensor_diagnostics | 4021 | Snsr diagnostics | Sensor Diagnostics selection determines whether certain sensor diagnostics are enabled or disabled | 读/写 | 枚举 | 8 |
var_TB82_solution | 4011 | Solution type | The solution type defines the solute algorithm used for concentration configurations. Both predefined and user-defined concentration configurations are available. The available solution types are dependent upon the current SENSOR_GROUP. Sensor Group A: 0 to 15% NaOH, 0 to 20% NaCl, 0 to 18% HCl, 0 to 20% H2SO4, User Defined. Sensor Group B: User Defined. Sensor Group C: User Defined. | 读/写 | 枚举 | 8 |
var_TB82_usrdef_secondary | 4012 | Concen curve name | This is a six character text name for the concentration curve. It could be modified in user-defined concentration configuration | 读/写 | ASCII | 2048 |
var_TB82_usrdef_unit | 4013 | User def conc unit | Engineering units for user defined concentration curve This will be used as the concentration value units when a user defined concentration curve is selected. | 读/写 | 枚举 | 8 |
var_TB82_concentration_range | 4014 | Concen range | The concentration range can be set when the solution type is set to user defined. For all other solution types it is read-only | 读/写 | 枚举 | 8 |
var_TB82_temp_sensor_type | 4022 | Temp snsr type | Temperature sensor type | 读/写 | 枚举 | 8 |
var_TB82_temp_comp_type | 4023 | Temp comp type | Determines the type of Temperature Compensation algorithm applied to the Primary Value | 读/写 | 枚举 | 8 |
var_TB82_manual_temp_setpoint_unit | 4043 | Manual temp unit | 读/写 | 枚举 | 8 | |
var_TB82_manual_temp_setpoint | 4028 | Manual Temp. | Manual Temperature value is used in the temp comp algorithm when the temp comp type is MANUAL. | 读/写 | 浮点 | 8 |
var_TB82_temp_auto_sol | 4024 | Auto TC option | This is valid when temp comp type is Automatic. The Automatic Temperature Compensation option applies an algorithm that adjusts for the temperature effect of a solute. The available options are dependent upon the current SENSOR_GROUP. Sensor Group A: Std KCl, TC Coeff, NaOH, NaCl, HCl, H2SO4, User Defined. Sensor Group B: Std KCl, TC Coeff, User Defined. Sensor Group C: Std KCl, TC Coeff, Pure H2O, User Defined. | 读/写 | 枚举 | 8 |
var_TB82_temp_pure_h2o | 4025 | Auto TC pure H2O options | This is valid when temp-comp type is Automatic and Auto TC option is Pure H2O. This parameter provides Pure H2O option selection for temp-comp. This selection is restricted to Sensor Group C. | 读/写 | 枚举 | 8 |
var_TB82_tc_coef | 4026 | Temp comp coeff | Temperature Compensation Coefficient: This is valid when tem-comp type is Automatic and Auto TC option is TC-coeff. The Temp Coeff is applied as percent of change of conductivity from a reference temp per deg C. Valid range is 0 to 9.99% per deg C. | 读/写 | 浮点 | 8 |
var_TB82_var_ref_temp | 4027 | Variable ref temp | Variable Reference Temperature provides the ability to use use any temp as the reference temp used to determine the temp-compensated conductivity value (i.e., Primary value). | 读/写 | 浮点 | 8 |
var_TB82_user_defined_tc_t1 | 404B | Temp 1 | Temp 1 of user defined temperature coefficient. First end point of the curve. Valid only when Auto-TC option is user-defined | 读/写 | 浮点 | 8 |
var_TB82_user_defined_tc_t2 | 404C | Temp 2 | Temp 2 of user defined temperature coefficient. Valid only when Auto-TC option is user-defined | 读/写 | 浮点 | 8 |
var_TB82_user_defined_tc_t3 | 404D | Temp 3 | Temp 3 of user defined temperature coefficient. Valid only when Auto-TC option is user-defined | 读/写 | 浮点 | 8 |
var_TB82_user_defined_tc_t4 | 404E | Temp 4 | Temp 4 of user defined temperature coefficient. Valid only when Auto-TC option is user-defined | 读/写 | 浮点 | 8 |
var_TB82_user_defined_tc_t5 | 404F | Temp 5 | Temp 5 of user defined temperature coefficient. Valid only when Auto-TC option is user-defined | 读/写 | 浮点 | 8 |
var_TB82_user_defined_tc_t6 | 4050 | Temp 6 | Temp 6 of user defined temperature coefficient. Last end point of the curve. Valid only when Auto-TC option is user-defined | 读/写 | 浮点 | 8 |
var_TB82_user_defined_tc_k1 | 4051 | K1/Kref | Ratio of uncompensated conductivity at Temp 1 to conductivity at reference temperature (K1/Kref). First endpoint of the curve. Valid only when Auto-TC option is user-defined | 读/写 | 浮点 | 8 |
var_TB82_user_defined_tc_k2 | 4052 | K2/Kref | Ratio of uncompensated conductivity at Temp 2 to conductivity at reference temperature (K2/Kref). Valid only when Auto-TC option is user-defined | 读/写 | 浮点 | 8 |
var_TB82_user_defined_tc_k3 | 4053 | K3/Kref | Ratio of uncompensated conductivity at Temp 3 to conductivity at reference temperature (K3/Kref). Valid only when Auto-TC option is user-defined | 读/写 | 浮点 | 8 |
var_TB82_user_defined_tc_k4 | 4054 | K4/Kref | Ratio of uncompensated conductivity at Temp 4 to conductivity at reference temperature (K4/Kref). Valid only when Auto-TC option is user-defined | 读/写 | 浮点 | 8 |
var_TB82_user_defined_tc_k5 | 4055 | K5/Kref | Ratio of uncompensated conductivity at Temp 5 to conductivity at reference temperature (K5/Kref). Valid only when Auto-TC option is user-defined | 读/写 | 浮点 | 8 |
var_TB82_user_defined_tc_k6 | 4056 | K6/Kref | Ratio of uncompensated conductivity at Temp 6 to conductivity at reference temperature (K6/Kref). Last endpoint of the curve. Valid only when Auto-TC option is user-defined | 读/写 | 浮点 | 8 |
var_TB82_user_defined_conc_x1 | 4015 | x1 Cond | x1 Conductivity point of the user defined concentration curve. | 读/写 | 浮点 | 8 |
var_TB82_user_defined_conc_x2 | 4017 | x2 Cond | x2 Conductivity point of the user defined concentration curve. | 读/写 | 浮点 | 8 |
var_TB82_user_defined_conc_x3 | 4019 | x3 Cond | x3 Conductivity point of the user defined concentration curve. | 读/写 | 浮点 | 8 |
var_TB82_user_defined_conc_x4 | 401B | x4 Cond | x4 Conductivity point of the user defined concentration curve. | 读/写 | 浮点 | 8 |
名称 | ID | 标签 | 描述 | 类型 | 访问 | 分类 |