Loading…
名称 ID 标签 描述 类型 访问 分类
upperRange_value 00EA 主变量实际量程上限 上限值——定义模拟值和范围100%点开始的操作端点。此外，上限值还定义与模拟量值关联的报警和与数值表示关联的报警开始的操作端点。 读/写 浮点 32
lowerRange_value 00EB 主变量实际量程下限 下限值——定义模拟值和范围0%点开始的操作端点。此外，下限值还定义与模拟量值关联的报警和与数值表示关联的报警开始的操作端点。 读/写 浮点 32
pv_Value 4036 PV 读 浮点 10
pv_Units 4037 主变量传感器单位 现场设备变量单位——使用数值表示、最小范围、范围上限、范围下限、传感器上限和传感器下限显示的工程单位。 读/写 枚举 8
pv_USL 400B USL 传感器上限值——定义上限值的最大可用数值。 读 浮点 8
pv_LSL 400A LSL 传感器上限值——定义上限值的最大可用数值。 读 浮点 8
pv_Min_Span 400C Minimum Span 最小范围值——定义上限值和下限值之间允许的最小差。 读 浮点 8
pv_Damp 4038 Damping 阻尼值——同时应用至各自模拟量输出的数值表示和模拟值的阻尼时间常数。该变量的单位始终为秒钟。 读/写 浮点 8
pv_SSN 4007 传感器序列号 传感器序列号——识别数值表示或现场设备变量来源的传感器。 读/写 无符号 2048
analog_value 400D 模拟量输出 模拟量输出值——在正常工作模式下跟踪数值表示的数值。 读/写 浮点 66
fail_mode 400E 模拟量输出报警类型 模拟量输出报警类型——定义当现场设备检测到模拟量输出可能未跟踪关联现场设备变量时模拟量输出响应的方式。注意——数值表示可能不确定。 读 枚举 64
transfer_function 1F84 转换功能 传送功能——定义由现场设备变量应用至模拟量输出和百分比范围的传送功能。传送功能不影响数值表示。 读 枚举 32
percent_range 4039 主变量 % 范围 % 范围——跟踪有关下限值和上限值所定义范围的数值表示的变量，该变量的单位始终为百分数。 读 浮点 34
sv_Value 403A Temp (SV) Secondary variable temperature 读 浮点 10
sv_Units 403B Temp (SV) unit Secondary variable temperature engineering units 读/写 枚举 8
tv_Value 403C Cond/Conc (TV) Device Tertiary Variable (TV). TV = Concentration value when PV type = Conductivity. TV = Conductivity value when PV type = Concentration. 读 浮点 10
tv_Units 403D Cond/Conc (TV) unit Tertiary variable conductivity or concentration engineering units 读/写 枚举 8
qv_Value 403E Uncomp Cond (QV) Quaternary variable temp-uncompensated conductivity 读 浮点 10
qv_Units 403F Uncomp Cond (QV) unit Quaternary variable uncompensated conductivity engineering units 读/写 枚举 8
var_TB82_primary_value_type 400F PV type Primary Value (PV) type selection. When PV type = Conductivity, PV value = Conductivity and TV value = Concentration. When PV type = Concentration, PV value = Concentration and TV value = Conductivity. 读/写 枚举 8
var_TB82_sensor_group 4010 Snsr group Three sensor groups are applied and defined by the sensor cell constant: A, B and C. 读/写 枚举 8
var_TB82_sensor_diagnostics 4021 Snsr diagnostics Sensor Diagnostics selection determines whether certain sensor diagnostics are enabled or disabled 读/写 枚举 8
var_TB82_solution 4011 Solution type The solution type defines the solute algorithm used for concentration configurations. Both predefined and user-defined concentration configurations are available. The available solution types are dependent upon the current SENSOR_GROUP. Sensor Group A: 0 to 15% NaOH, 0 to 20% NaCl, 0 to 18% HCl, 0 to 20% H2SO4, User Defined. Sensor Group B: User Defined. Sensor Group C: User Defined. 读/写 枚举 8
var_TB82_usrdef_secondary 4012 Concen curve name This is a six character text name for the concentration curve. It could be modified in user-defined concentration configuration 读/写 ASCII 2048
var_TB82_usrdef_unit 4013 User def conc unit Engineering units for user defined concentration curve This will be used as the concentration value units when a user defined concentration curve is selected. 读/写 枚举 8
var_TB82_concentration_range 4014 Concen range The concentration range can be set when the solution type is set to user defined. For all other solution types it is read-only 读/写 枚举 8
var_TB82_temp_sensor_type 4022 Temp snsr type Temperature sensor type 读/写 枚举 8
var_TB82_temp_comp_type 4023 Temp comp type Determines the type of Temperature Compensation algorithm applied to the Primary Value 读/写 枚举 8
var_TB82_manual_temp_setpoint_unit 4043 Manual temp unit 读/写 枚举 8
var_TB82_manual_temp_setpoint 4028 Manual Temp. Manual Temperature value is used in the temp comp algorithm when the temp comp type is MANUAL. 读/写 浮点 8
var_TB82_temp_auto_sol 4024 Auto TC option This is valid when temp comp type is Automatic. The Automatic Temperature Compensation option applies an algorithm that adjusts for the temperature effect of a solute. The available options are dependent upon the current SENSOR_GROUP. Sensor Group A: Std KCl, TC Coeff, NaOH, NaCl, HCl, H2SO4, User Defined. Sensor Group B: Std KCl, TC Coeff, User Defined. Sensor Group C: Std KCl, TC Coeff, Pure H2O, User Defined. 读/写 枚举 8
var_TB82_temp_pure_h2o 4025 Auto TC pure H2O options This is valid when temp-comp type is Automatic and Auto TC option is Pure H2O. This parameter provides Pure H2O option selection for temp-comp. This selection is restricted to Sensor Group C. 读/写 枚举 8
var_TB82_tc_coef 4026 Temp comp coeff Temperature Compensation Coefficient: This is valid when tem-comp type is Automatic and Auto TC option is TC-coeff. The Temp Coeff is applied as percent of change of conductivity from a reference temp per deg C. Valid range is 0 to 9.99% per deg C. 读/写 浮点 8
var_TB82_var_ref_temp 4027 Variable ref temp Variable Reference Temperature provides the ability to use use any temp as the reference temp used to determine the temp-compensated conductivity value (i.e., Primary value). 读/写 浮点 8
var_TB82_user_defined_tc_t1 404B Temp 1 Temp 1 of user defined temperature coefficient. First end point of the curve. Valid only when Auto-TC option is user-defined 读/写 浮点 8
var_TB82_user_defined_tc_t2 404C Temp 2 Temp 2 of user defined temperature coefficient. Valid only when Auto-TC option is user-defined 读/写 浮点 8
var_TB82_user_defined_tc_t3 404D Temp 3 Temp 3 of user defined temperature coefficient. Valid only when Auto-TC option is user-defined 读/写 浮点 8
var_TB82_user_defined_tc_t4 404E Temp 4 Temp 4 of user defined temperature coefficient. Valid only when Auto-TC option is user-defined 读/写 浮点 8
var_TB82_user_defined_tc_t5 404F Temp 5 Temp 5 of user defined temperature coefficient. Valid only when Auto-TC option is user-defined 读/写 浮点 8
var_TB82_user_defined_tc_t6 4050 Temp 6 Temp 6 of user defined temperature coefficient. Last end point of the curve. Valid only when Auto-TC option is user-defined 读/写 浮点 8
var_TB82_user_defined_tc_k1 4051 K1/Kref Ratio of uncompensated conductivity at Temp 1 to conductivity at reference temperature (K1/Kref). First endpoint of the curve. Valid only when Auto-TC option is user-defined 读/写 浮点 8
var_TB82_user_defined_tc_k2 4052 K2/Kref Ratio of uncompensated conductivity at Temp 2 to conductivity at reference temperature (K2/Kref). Valid only when Auto-TC option is user-defined 读/写 浮点 8
var_TB82_user_defined_tc_k3 4053 K3/Kref Ratio of uncompensated conductivity at Temp 3 to conductivity at reference temperature (K3/Kref). Valid only when Auto-TC option is user-defined 读/写 浮点 8
var_TB82_user_defined_tc_k4 4054 K4/Kref Ratio of uncompensated conductivity at Temp 4 to conductivity at reference temperature (K4/Kref). Valid only when Auto-TC option is user-defined 读/写 浮点 8
var_TB82_user_defined_tc_k5 4055 K5/Kref Ratio of uncompensated conductivity at Temp 5 to conductivity at reference temperature (K5/Kref). Valid only when Auto-TC option is user-defined 读/写 浮点 8
var_TB82_user_defined_tc_k6 4056 K6/Kref Ratio of uncompensated conductivity at Temp 6 to conductivity at reference temperature (K6/Kref). Last endpoint of the curve. Valid only when Auto-TC option is user-defined 读/写 浮点 8
var_TB82_user_defined_conc_x1 4015 x1 Cond x1 Conductivity point of the user defined concentration curve. 读/写 浮点 8
var_TB82_user_defined_conc_x2 4017 x2 Cond x2 Conductivity point of the user defined concentration curve. 读/写 浮点 8
var_TB82_user_defined_conc_x3 4019 x3 Cond x3 Conductivity point of the user defined concentration curve. 读/写 浮点 8
var_TB82_user_defined_conc_x4 401B x4 Cond x4 Conductivity point of the user defined concentration curve. 读/写 浮点 8
名称 ID 标签 描述 类型 访问 分类